Journal of Thermal Engineering
- CFD modelling of the microclimate of a cultivated greenhouse: A validation study between experimental and numerical results
- An experimental investigation to study the performance characteristics of heat pipe using aqueous hybrid nanofluids
- Parametric evaluation of solar integrated combined partial cooling supercritical CO2 cycle and Organic Rankine Cycle using low global warming potential fluids
- Insight of boundary layer structure with heat transfer through a diverging porous channel in Darcy-Forchheimer porous material with suction/injection: A study of separation control
- Numerical simulation to study mixing vane spacer effects on heat transfer performance of supercritical pressure fluid in an annular channel
- Single-phase and two-phase models of a hybrid nanofluid traveling through a non-uniformly heated (PTC) receiver: A comparative study
- The evaluation of the performance of the heat exchanger of a triple concentric tube configuration with ionic liquid (imidazolium) and MWCNT ionanofluid
- Analysis of thermophysical properties of novel hybrid nanoparticles based vegetable nanofluid
- Experimental investigation of impact of fire size on heat transfer and flame behavior of initial stage unsteady pool fires inside a cubical enclosure
- Experimental study on a novel waterless solar collector
- Analysis of solar water desalination using hybrid nanofluids: An experimental study
- Experimental analysis of heat transfer characteristics using ultrasonic acoustic waves
- Heat transfer enhancement of electronic devices by using flexible printed circuit boards
- Drying model based on the relative humidity profile of thin-layer tomatoes in an indirect solar dryer
- Experimental and theoretical investigation of thermal efficiency and productivity of single slope basin type solar distillation system using honey-comb
- Mathematical modelling of evaporation rate and heating of biodiesel blends of a single-component droplets
- Numerical analysis on heat transfer, flow structure and exergy loss of combined truncated and circular ribs in a square duct
- A thermohydrodynamic performance analysis of a fluid film bearing considering with geometrical parameters
- Geometric modification and placement of high heat flux ic chips on substrates of different materials for enhanced heat transfer
- Experimental study on heat transfer from rectangular fins in combined convection
- Design and development of air ventilated air bed for hospitalized patients
- Determination of optimum insulation thickness in submarines
- Flow field and heat transfer of ferromagnetic nanofluid in presence of magnetic field inside a corrugated tube
- Energy and exergy analyses of a two-stage organic rankine cycle with low pressure stage regeneration for IC engine waste heat recovery
- Experimental studies on drying characteristics of green chilies in a solar dryer
- Optimization of energy transmittance through building envelope for hot dry climate
- Natural convection between hot and cold cylinders in enclosed space filled with copper-water nanofluid
- Evaluation and optimization of single-effect vapour absorption system for the dairy industry using design of experiment approach
- Numerical analysis of an isolation room to prevent the spread of COVID-19
- Natural ventilation in a lege space with heat source: CFD visualization and taguchi optimization
- Transient analysis of convective-radiative heat transfer through porous fins with temperature-dependent thermal conductivity and internal heat generation
- The effects of different typical meteorological year data on the heating and cooling demand of buildings: Case study of Turkiye
- Evolution of steam turbines: A bibliometric approach
- Comparative study of biodiesel production from different waste oil sources for optimum operation conditions and better engine performance
- Combined heat pump heating and ventilation system using heat of soil, sewage water and ventilation emissions
- Performance improvement methods for quartz tube solid particle fluidized bed solar receiver
- Refrigerant progression - an investigation into eco-sustainability with evolution and viability of fourth generation refrigerants
- A numerical evaluation on the utilization of earth to air heat exchangers in arid regions Algeria
- A critical re-examination of Reynolds analogy for micro-convective flow
- Heat transfer analysis using a duct filled with metal foams
- Effect of the position of the hot source on mixed convection in a rectangular cavity
- Experimental investigation of thermal comfort performance of a radiant wall and ceiling panel system
- A critical assessment of the implementation of phase change materials in the VCC of refrigerator
- Impact of baffle on forced convection heat transfer of CuO/water nanofluid in a micro-scale backward facing step channel
- Assessment of microwave susceptors for optimum temperature rise using parametric numerical simulation
- CFD analysis andheat transfer characteristics of printed circuit heat exchanger
- Second law analysis on an elliptical twisted tube for a heat exchanger
- Thermo-hydraulic characteristics of mixed convection of transition flow in a conduit at different tilts
- Design studies on horizontal and vertical configuration of ground earth heat exchanger
- Comparative exergy and energy analyses and optimization of different configurations for a laundry purpose
- Performance analysis of microchannel heat sink with flow disrupting pins
- A scoping review on recent advancements in domestic applications of solar thermal systems
- Hybrid nanofluids development and benefits: A comprehensive review
- Numerical analysis of a two-phase injection refrigeration cycle using R32
- Profile drying: A novel multistage convection drying method for indian dark red onion slices
- An application of conventional and advanced exergy approaches on a R41/R1233ZD(E) cascade refrigeration system under optimum conditions
- Performance estimation of a solar chimney power plant (SCPP) in several regions of Turkey
- Application of ANN and prediction of drying behavior of mushroom drying in side hybrid greenhouse solar dryer: An experimental validation
- Heat transfer investigation of non-newtonian fluid flow in anannular pipe embedded with porous discs: A turbulent study
- Effect of HVAC system size on the optimum insulation thickness of the buildings in different climate zones
- Parametric study of natural convection showing effects of geometry, number and orientation of fins on a finned tube system: A numerical approach
- Three dimensional MHD nanoluid stagnation point low withhigher order chemical reaction
- Mathematical modeling of semitransparent photovoltaicthermal (SPVT) system with different packing factors: An experimental validation
- Numerical investigation of the heat transfer enhancement inside a square duct with rectangular vortex generators
- Design and development of a novel multichannel data acquisition system using labview for an automobile air conditioning application
- Mini-channel heat exchanger optimization using genetic algorithm and multiple-criteria decision making
- Heat and mass transfer in stagnation point flow of cross nanofluid over a permeable extending/contracting surface: A stability analysis
- Thermoeconomic analysis and multi-objective optimization of a novel trigeneration system consisting of kalina and humidification- dehumidification desalination cycles
- Experimental investigation of heat transfer characteristics of an inverse diffusion flame in a coaxial tube burner for with and without swirl
- Parametric optimization of blowdown operated double-effect vapour absorption refrigeration system
- Thermal analysis on the impact of spray charactristics on evaporative cooling process
- A review on thermal analysis of hybrid greenhouse solar dryer (HGSD)
- Simulation of turbulent convective heat transfer of γ-al2o3/water nanofluid in a tube by ann and anfis models
- EXERGETIC AND ENERGETIC EVALUATION OF AN INNOVATIVE SOLAR AIR HEATING SYSTEM COATED WITH GRAPHENE AND COPPER OXIDE NANOPARTICLES
- PERFORMANCE OF RECTANGULAR PIN-FIN HEAT SINK SUBJECT TO AN IMPINGING AIR FLOW
- NUMERICAL INVESTIGATION OF HEAT TRANSFER WATER-COOLED ROOF IN AN ELECTRIC ARC FURNACE
- EXPERIMENTAL ASSESSMENT OF COMPARATIVE R290VS. R449A REFRIGERANTS BY USING 3E (ENERGY, EXERGY AND ENVIRONMENT) ANALYSIS: A SUPERMARKET APPLICATION
- CONVECTIVE HEAT TRANSFER AND FULLY DEVELOPED FLOW FOR CIRCULAR TUBE NEWTONIAN AND NON-NEWTONIAN FLUIDS CONDITION
- A METHOD TO PREDICT FOULING ON MULTI-STOREY BUILDING MOUNTED SOLAR PHOTOVOLTAIC PANELS: A COMPUTATIONAL FLUID DYNAMICS APPROACH
- MULTI-OBJECTIVE PARTICLE SWARM OPTIMIZATION OF THE K-TYPE SHELL AND TUBE HEAT EXCHANGER (CASE STUDY)
- THERMAL NUMERICAL INVESTIGATION OF A SMALL PARABOLIC TROUGH COLLECTOR UNDER DESERT CLIMATIC CONDITIONS
- THERMAL DESIGN, ANALYSIS AND TEST VALIDATION OF TURKSAT-3USAT SATELLITE
- NUMERICAL STUDY OF TURBULENT HEAT TRANSFER IN A HORIZONTAL CHANNEL PROVIDED WITH SQUARE BLOCKS: EFFECT OF THE INTER BLOCKS SPACING
- OPTICAL NUMERICAL INVESTIGATION OF A SOLAR POWER PLANT OF PARABOLIC TROUGH COLLECTORS
- THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD
- INVESTIGATIONS ON HEAT TRANSFER CHARACTERISTICS OF POROUS TYPE COPPER HEAT SINK WITH BIFURCATIONS
- A REVIEW ON PULSATING HEAT PIPES: LATEST RESEARCH, APPLICATIONS AND FUTURE SCOPE
- COMPARISON STUDY BETWEEN THEORETICAL ANALYSIS AND ARTIFICIAL NEURAL NETWORK OF THE CAPILLARY TUBE
- COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES
- EXPERIMENTAL INVESTIGATION ON THERMAL BEHAVIOR OF HYBRID SINGLE SLOPE SOLAR STILL
- PHYSICAL EFFECTS OF VARIABLE FLUID PROPERTIES ON GASEOUS SLIPFLOW THROUGH A MICRO-CHANNEL HEAT SINK
- ANALYSIS OF A HYBRID CASCADED LATENT/SENSIBLE STORAGE SYSTEM FOR PARABOLIC-TROUGH SOLAR THERMAL PLANTS
- EXPERIMENTAL AND NUMERICAL INVESTIGATION OF CONVECTION HEAT TRANSFER IN AN ENCLOSURE WITH A VERTICAL HEATED BLOCK AND BAFFLES
- INFLUENCE OF RELAXATION TIMES ON HEAT TRANSFER IN HUMAN HEAD EXPOSED TO MICROWAVE FREQUENCIES
- A LOOP THERMOSYPHON FOR LIQUID COOLED MINICHANNELS HEAT SINK WITH PULSATE SURFACE HEAT FLUX
- NUMERICAL INVESTIGATION OF NATURAL CONVECTION WITH HEATED TUBES IN TUNNEL GREENHOUS
- A NUMERICAL STUDY OF ENTROPY GENERATION ON OLDROYD-B NANOFLUID FLOW PAST A RIGA PLATE
- PARAMETRIC EFFECTS ON THE PERFORMANCE OF AN INDUSTRIAL COOLING TOWER
- SOLAR ABSORPTION COOLING SYSTEMS: A REVIEW
- DESIGN, IMPLEMENTATION AND ANALYSIS OF THE OVERALL PERFORMANCE OF A MICRO HYDRO TURGO TURBINE
- STUDY OF THE FLOW AND HEAT TRANSFER OF A VISCOELASTIC FLUID USING HYBRID NEURAL NETWORK-PARTICLE SWARM OPTIMIZATION (HNNPSO)
- THERMOECONOMIC ANALYSIS AND MULTI-OBJECTIVE OPTIMIZATION OF AN INTEGRATED SOLAR SYSTEM FOR HYDROGEN PRODUCTION USING PARTICLE SWARM OPTIMIZATION ALGORITHM
- ENHANCEMENT THE SOLAR DISTILLER WATER BY USING PARABOLIC DISH COLLECTOR WITH SINGLE SLOPE SOLAR STILL
- EFFECT OF ALIGNED MAGNETIC FIELD AND INCLINED OUTER VELOCITY IN CASSON FLUID FLOW OVER A STRETCHING SHEET WITH HEAT SOURCE
- THERMAL PERFORMANCE INVESTIGATION OF A HYBRID SOLAR AIR HEATER APPLIED IN A SOLAR DRYER USING THERMODYNAMIC MODELING
- CFD MODELING OF SLURRY PIPELINE AT DIFFERENT PRANDTL NUMBERS
- CONCEPTUALIZATION, THERMAL ANALYSIS, AND MANUFACTURING OF NANOTEXTURED MICRO-STRUCTURED SURFACES FOR ENHANCED CONDENSATION HEAT TRANSFER
- NUMERICAL SIMULATION OF PRANDTL NUMBER EFFECT ON ENTROPY GENERATION IN A SQUARE CAVITY
- PERFORMANCE ANALYSIS OF A MICRO HEAT EXCHANGER IN ELECTRONIC COOLING APPLICATIONS
- A SYSTEMATIC GRAPHICAL METHOD FOR SYNTHESIS OF HEAT EXCHANGER NETWORKS
- TURBULENT HEAT TRANSFER FOR INTERNAL FLOW OF ETHYLENE GLYCOLAL2O3 NANOFLUID IN A SPIRAL GROOVED TUBE WITH TWISTED TAPE INSERTS
- AN ESTIMATION METHOD FOR GREENHOUSE TEMPERATURE UNDER THE INFLUENCE OF EVAPORATIVE COOLING SYSTEM
- NUMERICAL INVESTIGATION OF HORIZONTAL MAGNETIC FIELD EFFECT ON THE FLOW CHARACTERISTICS OF GALLIUM FILLED IN A VERTICAL ANNULUS
- EXERGETIC AND ENERGETIC EVALUATION OF AN INNOVATIVE SOLAR AIR HEATING SYSTEM COATED WITH GRAPHENE AND COPPER OXIDE NANO-PARTICLES
- PHYSICAL EFFECTS OF VARIABLE FLUID PROPERTIES ON GASEOUS SLIP-FLOW THROUGH A MICRO-CHANNEL HEAT SINK
- AN OVERVIEW OF RECENT PROGRESS IN CONDENSATION HEAT TRANSFERENHANCEMENT ACROSS HORIZONTAL TUBES AND THE TUBE BUNDLE
- REDUCTION OF ENERGY USE IN INDUSTRIAL FACILITY
- NUMERICAL INVESTIGATION OF NON-UNIFORM HEAT TRANSFERENHANCEMENT IN PARABOLIC TROUGH SOLAR COLLECTORS USING DUALMODIFIED TWISTED-TAPE INSERTS
- EFFECT OF EXHAUST LAYOUT ON THE INDOOR THERMAL COMFORT UNDERHARSH WEATHER CONDITIONS
- MATHEMATICAL MODELLING, SIMULATION ANALYSIS OF A PHOTOVOLTAICTHERMAL SYSTEM
- REVIEW ENHANCEMENT OF THERMAL CONDUCTIVITY AND HEAT TRANSFER USING CARBON NANOTUBE FOR NANOFLUIDS AND IONANOFLUIDS
- WASTE HEAT RECOVERY TECHNOLOGIES: PATHWAY TO SUSTAINABLEENERGY DEVELOPMENT
- FORCED CONVECTION COOLIG OF MULTIPLE HEAT SOURCESUSING OPEN CELL METAL FOAMS
- PERFORMANCE ANALYSIS OF A SOLAR-DRIVEN EJECTOR AIR CONDITIONINGSYSTEM UNDER EL-OUED CLIMATIC CONDITIONS, ALGERIA
- A THEORETICAL INVESTIGATION ON THE EVAPORATIVE HEAT TRANSFER OFCO2 IN SMOOTH AND MICROFIN TUBE
- FINITE ELEMENT SOLUTION OF HYDROMAGNETIC MIXED CONVECTION IN A NANOFLUID FILLED VENTED GROOVED CHANNEL
- LARGE EDDY SIMULATION OF FLOW OVER ELLIPTIC CYLINDER ARRAYIN SQUARE CONFIGURATION AT SUBCRITICAL REYNOLDS NUMBERS
- ENERGY AND EXERGY INVESTIGATIONS OF R1234yf AND R1234ze ASR134a REPLACEMENTS IN MECHANICALLY SUBCOOLED VAPOUR COMPRESSION REFRIGERATION CYCLE
- PERFORMANCE EVALUATION OF PARABOLIC TROUGH COLLECTOR WITHRECEIVER POSITION ERROR
- CFD NUMERICAL AND EXPERIMENTAL INVESTIGATION OF TWO-PHASEFLOW DEVELOPMENT AFTER AN EXPANSION DEVICE IN AHORIZONTAL PIPE
- THERMODYNAMIC ASSESSMENT AND OPTIMIZATION OF A NOVELTRIGENERATION ENERGY SYSTEM BASED ON SOLAR ENERGY AND MSWGASIFICATION USING ENERGY AND EXERGY CONCEPT
- MULTISCALE APPROACH OF THE EQUIVALENT THERMALCONDUCTIVITY OF MODIFIED FOAM-FILLED AND NON-FILLED HOLLOWBRICK AND A BRICK WALL
- NATURAL CONVECTION HEAT TRANSFER INSIDE HORIZONTAL CIRCULARENCLOSURE WITH TRIANGULAR CYLINDER AT DIFFERENT ANGLES OFINCLINATION
- ANALYTICAL AND COMPARATIVE INVESTIGATION OF PARTICULATE SIZEEFFECT ON SLURRY FLOW CHARACTERISTICS USING COMPUTATIONALFLUID DYNAMICS
- NUMERICAL ANALYSIS OF NATURAL CONVECTION IN A HEATED ROOM ANDITS IMPLICATION ON THERMAL COMFORT
- AN OVERVIEW OF RECENT PROGRESS IN CONDENSATION HEAT TRANSFER ENHANCEMENT ACROSS HORIZONTAL TUBES AND THE TUBE BUNDLE
- NUMERICAL ANALYSIS OF NATURAL CONVECTION IN A HEATED ROOM AND ITS IMPLICATION ON THERMAL COMFORT
- ENERGY AND EXERGY INVESTIGATIONS OF R1234yf AND R1234ze AS R134a REPLACEMENTS IN MECHANICALLY SUBCOOLED VAPOUR COMPRESSION REFRIGERATION CYCLE
- NUMERICAL INVESTIGATION OF NON-UNIFORM HEAT TRANSFER ENHANCEMENT IN PARABOLIC TROUGH SOLAR COLLECTORS USING DUAL MODIFIED TWISTED-TAPE INSERTS
- EFFECT OF EXHAUST LAYOUT ON THE INDOOR THERMAL COMFORT UNDER HARSH WEATHER CONDITIONS
- A THEORETICAL INVESTIGATION ON THE EVAPORATIVE HEAT TRANSFER OF CO2 IN SMOOTH AND MICROFIN TUBE
- PERFORMANCE ANALYSIS OF A SOLAR-DRIVEN EJECTOR AIR CONDITIONING SYSTEM UNDER EL-OUED CLIMATIC CONDITIONS, ALGERIA
- MULTISCALE APPROACH OF THE EQUIVALENT THERMAL CONDUCTIVITY OF MODIFIED FOAM-FILLED AND NON-FILLED HOLLOW BRICK AND A BRICK WALL
- LARGE EDDY SIMULATION OF FLOW OVER ELLIPTIC CYLINDER ARRAY IN SQUARE CONFIGURATION AT SUBCRITICAL REYNOLDS NUMBERS
- ANALYTICAL AND COMPARATIVE INVESTIGATION OF PARTICULATE SIZE EFFECT ON SLURRY FLOW CHARACTERISTICS USING COMPUTATIONAL FLUID DYNAMICS
- NATURAL CONVECTION HEAT TRANSFER INSIDE HORIZONTAL CIRCULAR ENCLOSURE WITH TRIANGULAR CYLINDER AT DIFFERENT ANGLES OF INCLINATION
- FORCED CONVECTION COOLIG OF MULTIPLE HEAT SOURCES USING OPEN CELL METAL FOAMS
- PERFORMANCE EVALUATION OF PARABOLIC TROUGH COLLECTOR WITH RECEIVER POSITION ERROR
- MATHEMATICAL MODELLING, SIMULATION ANALYSIS OF A PHOTOVOLTAIC THERMAL SYSTEM
- CFD NUMERICAL AND EXPERIMENTAL INVESTIGATION OF TWO-PHASE FLOW DEVELOPMENT AFTER AN EXPANSION DEVICE IN A HORIZONTAL PIPE
- WASTE HEAT RECOVERY TECHNOLOGIES: PATHWAY TO SUSTAINABLE ENERGY DEVELOPMENT
- THERMODYNAMIC ASSESSMENT AND OPTIMIZATION OF A NOVEL TRIGENERATION ENERGY SYSTEM BASED ON SOLAR ENERGY AND MSW GASIFICATION USING ENERGY AND EXERGY CONCEPT
- NUMERICAL INVESTIGATION OF MHD CASSON NANOFLUID FLOW TOWARDS A NON LINEAR STRETCHING SHEET IN PRESENCE OF DOUBLE-DIFFUSIVE EFFECTS ALONG WITH VISCOUS AND OHMIC DISSIPATION
- EXPERIMENTAL RESEARCH AND CFD SIMULATION OF CROSS FLOW MICROCHANNEL HEAT EXCHANGER
- MIXING ENHANCEMENT IN ELECTROOSMOTIC MICROMIXERS
- THERMAL BEHAVIOUR KINETIC MODELING OF CAPSICUM ANNUUM WASTE BIOMASS USING AN ISO-CONVERSION METHOD
- AS A POTENTIAL HYDRAULIC FLUID: CORN OIL BEHAVIOR CHARACTERISTICS EXAMINATION
- EFFECT OF DYE CONCENTRATION ON PATTERNED LUMINESCENT SOLAR CONCENTRATOR
- AN EXPERIMENTAL OPTIMIZATION STUDY OF A PHOTOVOLTAIC SOLAR PUMPING SYSTEM USED FOR SOLAR DOMESTIC HOT WATER SYSTEM UNDER IRAQI CLIMATE
- STABILIZATION OF MINORITY CARRIER LIFETIME IN PERC STRUCTURED SILICON SOLAR CELL
- OPTICAL AND RADIATIVE PROPERTIES OF INDIVIDUAL AND HYBRID NANOSUSPENSIONS: THE EFFECTS OF SIMILAR AND DISSIMILAR PARTICLE AGGLOMERATES ON THERMAL RADIATION
- MIXED CONVECTION HEAT TRANSFER OF SIO2-WATER AND ALUMINA-PAO NANO-LUBRICANTS USED IN A MECHANICAL BALL BEARING
- THREE-DIMENSIONAL SIMULATION OF A TURBULENT FLOW AROUND A TAPERED CUBE DUG IN THE MIDDLE
- DYNAMIC SIMULATION OF AN AIR-GAP MEMBRANE DISTILLATION (AGMD) PROCESS USING PHOTOVOLTAIC PANELS SYSTEM AND FLAT PLATE COLLECTORS
- PREDICTION SULPHURIC ACID AND WATER VAPOUR DEW POINT TEMPERATURES OF FLUE GASES AND COMBUSTION ANALYSIS FOR SOLID FUELS IN TURKEY
- NUMERICAL ANALYSIS OF HEAT TRANSFER IN MULTILAYERED SKIN TISSUE EXPOSED TO 5G MOBILE COMMUNICATION FREQUENCIES
- MAGNESIUM SULFATE HEPTAHYDRATE AS PHASE CHANGE MATERIAL IN DOUBLE SLOPE SOLAR STILL
- FLOW DYNAMICS OF LID-DRIVEN CAVITIES WITH OBSTACLES OF VARIOUS SHAPES AND CONFIGURATIONS USING THE LATTICE BOLTZMANN METHOD
- NUMERICAL INVESTIGATION OF ROD-AIRFOIL CONFIGURATION AEROACOUSTIC CHARACTERISTICS USING FFOWCS-WILLIAMS-HAWKINGS EQUATIONS
- A BAYESIAN NETWORK-BASED APPROACH FOR FAILURE ANALYSIS IN WEAPON INDUSTRY
- AERODYNAMIC STUDY OF SLOTTED FLAP FOR NACA 24012 AIRFOIL BY DYNAMIC MESH TECHNIQUES AND VISUALIZATION FLOW
- CHARACTERIZATION OF SYNTHESIZED POLYMERIC BLEND MEMBRANES ENHANCED BY METHYL DIETHANOLAMINE FOR EFFICIENT CO2 SEPARATION
- Parametric investigation of open-drive scroll expander for micro organic rankine cycle applications
- Energy and exergy analysis of a combined system: cascade organic Rankine cycle and cascade refrigeration cycle
- Performance analysis of adsorption refrigeration system using silicagel/methanol pair: experimental & analytical approaches
- Optimisation on the thermal insulation layer thickness in buildings with environmental analysis: an updated comprehensive study for Turkey’s all provinces
- Effect of viscosity on entropy generation for laminar flow in helical pipes
- Performance comparison and investigation of two different renewable energy fueled multigeneration systems
- Convective heat and mass transfer of chemically reacting fluids with activation energy with radiation and heat generation
- A study on heat and mass transfer analysis of solar distillation system
- A novel tri-generation energy system integrating solar energy and industrial waste heat
- Experimental investigation of a Scheffler reflector for the medium temperature applications
- Experimental study of a stand-alone earth to air heat exchanger for heating and cooling in arid regions
- Enhancement of household refrigerator energy efficiency by studying the effect of refrigerant charge and capillary tube length
- A review on effect of various artificial roughness on heat transfer enhancement in a channel flow
- A review on convective heat augmentation techniques in solar thermal collector using nanofluid
- Numerical simulation on performance evaluation among metal and oxide based nanofluids for power savings application of a circular tube
- A comprehensive review to study and implement solar energy in dairy industries
- Optimum design analysis of a solar-assisted Libr/H2 O absorption system with a flat-plate collector
- Comparative thermal analysis of applications using novel solar air heater with u-shaped longitudinal fins: suitable for coastal regions
- Energetic and exergetic performance comparison of an experimental automotive air conditioning system using refrigerants R1234yf and R134a
- Flow behavior and thermal separation mechanism on vortex tube
- NUMERICAL INVESTIGATION OF NATURAL CONVECTION WITH HEATED TUBES IN TUNNEL GREENHOUSE
- TURBULENT HEAT TRANSFER FOR INTERNAL FLOW OF ETHYLENE GLYCOL-AL2O3 NANOFLUID IN A SPIRAL GROOVED TUBE WITH TWISTED TAPE INSERTS
- CONCEPTUALIZATION, THERMAL ANALYSIS, AND MANUFACTURING OF NANO-TEXTURED MICRO-STRUCTURED SURFACES FOR ENHANCED CONDENSATION HEAT TRANSFER
- Analysis of heat transfer performance of the absorber tube with convergent-divergent structure for parabolic trough collector
- Modeling of the effect of nano-enhanced phase change material on the performance of a large-scale wallboard
- The temperature distribution of the wet cylinder liner of v-12 engine according to calculation and experiment
- Bio-heat transfer in cancer treatment using cryo-freezing method
- Five different distributions and metaheuristics to model wind speed distribution
- Performance assessment of an electrolyte-supported and anodesupported planar solid oxide fuel cells hybrid syste
- Development and performance analysis of hybrid photovoltaic/thermal (PV/T) system
- Performance evaluation of a rotary dryer in both co-current and counter-current configurations
- Mixed convective flow of heat and mass transfer of nanofluids over a static wedge with convective boundary conditions
- Topographical thermal imaging for solid square shaft cooling
- Numerical investigation of effect of different parameter on heat transfer for a crossflow heat exchanger by using nanofluids
- Empirical modelling for work piece temperature during end milling of inconel 625 using a green’s function approach based on dirac delta function
- No formation and its reduction through co-flow methane reburn in a pulverised coal combustion process under various overall equivalence ratio
- Estimation of hourly global solar radiation using artificial neural network in Adana province, Turkey
- Three dimensional flow over elliptic cylinders arrays in octagonal arrangement
- Investigation of laminar forced convection heat transfer of nanofluids through flat plate solar collector
- A numerical investigation of the species transport approach for modeling of gaseous combustion
- Occupational heat stress under high-heat furnace work environments - a comprehensive review on developing countries
- Factors affecting on human thermal comfort inside the kitchen area of railway pantry car - a review
- Hydrodynamics of single bubble rising through water column using volume of fluid (VOF) method
- 3D investigation of semi-underground room comfort in a desert climate
- Numerical simulation of heat transfer characteristics of taper helical and spiral tube heat exchanger
- Experimental investigation on thermal conductivity and thermal degredation of Honge oil methyl ester with B-20 blend.
- Enhancement technique of heat transfer using inserted twisted tape
- Experimental investigation on the effect of thermophysical properties of a heat transfer fluid on pumping performance for a convective heat transfer system
- Exergoeconomic, environmental, economic, and energy-matrices (4E) analysis of three solar distillation systems equipped with condenser and different heaters
- Heat transfer enhancement using different types of turbulators on the heat exchangers
- Experimental effect of inclination on the process of melting paraffin in a square cavity
- Numerical comparison study on heat transfer enhancement of different cross-section wire coils insert with varying pitches in a duct
- Performance of phase changing material in an artificially created cold region to promote latent heat thermal energy storage
- Examining performance and optimization of a cogeneration system comprised with allam cycle and MED-TVC for generating power and drinking water: Case study: Kish island
- Thermoeconomical optimization of a regenerative air turbine cogeneration system
- Positive impact of vibration on heat transfer in twisted tape inserted heat exchanger
- Experimental investigation on thermal conductivity and stability of water-graphite nanofluid
- Numerical investigation of laminar forced convection and entropy generation of Fe3O4/water nanofluids in different cross-sectioned channel geometries
- Combined effect of variable parameters on the performance of gas turbine cycles
- Influence of Convective Boundary Condition on heat and mass transfer in a Walters’ B fluid over a vertical stretching surface with thermal-diffusion effect
- The effect of Nusselt number on the bi-viscosity fluid subjected to the discrete heating effect
- Drop-in and retrofit refrigerants as replacement possibilities of R134a in domestic/commercial refrigeration and automobile air conditioner applications
- Thermodynamic investigations on 227 kWp industrial rooftop power plant
- Heat transfer performance of a radiator with and without louvered strip by using Graphene-based nanofluids
- Heat transfer analysis of hybrid active solar still with water flowing over glass cover
- Experimental study of combustion of low-calorific producer gas from small scale biomass gasification within porous burner
- Impact of outer velocity on flow, heat and mass transfer of Casson nanofluid over a non-linear stretching sheet
- Temperature-dependent particle stability behavior and its effect on radiative transfer in water/SiO2 nanofluids
- Mixed convection heat transfer from a vertical flat plate subjected to periodic oscillations
- Simulation modeling and experimental validation of solar photovoltaic PMBLDC motor water pumping system
- Effect of air fan position on heat transfer performance of elliptical pin fin heat sink subjected to impinging air flow
- Numerical investigation of heat transfer and pressure drop characteristics in an offset strip fin heat exchanger
- Boiling heat transfer simulation in rectangular mili-channels
- Thermodynamic analysis of the Allam cycle and its pressure sensitivity
- Experimental testing of scroll machine driven by compressed air for power generation and its integration in small scale organic Rankine cycle
- Effect of fibrous porous material on natural convection heat transfer from a horizontal circular cylinder located in a square enclosure
- Effect of orientation of elliptic tube on the total melting time of latent thermal energy storage systems
- Energy and exergy analysis of an enhanced solar CCHP system with a collector embedded by porous media and nano fluid
- Comparison of thermal response times of historical and modern building wall materials
- Influences of the dead end on the flow characteristics at the exhaust manifold of a marine diesel engine
- Analysis and simulation of thermal performance of a PTC with secondary reflector
- Numerical investigation of supercritical heat transfer of water flowing in vertical and horizontal tube with emphasis of gravity effect
- Factors influencing the performance of solar air heater (SAH) having artificial coarseness: a review
- ADVANCEMENT OF SOLAR SELECTIVE DLC COATING USING CAPVD FOR SOLAR THERMAL APPLICATIONS
- ANALYSIS AND OPTIMIZATION OF VAPOR ABSORPTION GENERATOR-HEAT EXCHANGER USING KERN METHOD AND CFD
- EXERGY ANALYSIS OFTHE CROSS CURRENT COOLING TOWER
- FEASIBILITY OF GLYCERIN/Al2O3 NANOFLUID FOR AUTOMOTIVE COOLING APPLICATIONS
- A TECHNO-ECONOMIC FEASIBILITY STUDY FOR REDUCING THE ENERGY CONSUMPTION IN A BUILDING: A SOLAR ENERGY CASE STUDY FOR BANDAR ABBAS
- MULTI OBJECTIVE OPTIMIZATION OF WASTE HEAT RECOVERY IN CEMENT INDUSTRY (A CASE STUDY)
- A SIMULATED STUDY ON THE EFFECT OF WATER TEMPERATURE ON COOLING EFFICIENCY OF WATER MIST FIRE EXTINGUISHERS
- EXPERIMENTAL STUDIES ON PRESSURE DROP CHARACTERIZATION OF CURVED TUBE SECTIONS IN LAMINAR FLOW REGIME
- AN INTEGRATED MODEL TO STUDY THE EFFECTS OF OPERATIONAL PARAMETERS ON THE PERFORMANCE AND POLLUTANT EMISSIONS IN A UTILITY BOILE
- HARNESSING AND STORING SOLAR THERMAL ENERGY USING PHASE CHANGE MATERIAL (PCM) IN A SMALL FLAT PLATE COLLECTOR
- FLOW BOILING HEAT TRANSFER CHARACTERISTICS OF TITANIUM OXIDE/WATER NANOFLUID (TIO2/DI WATER) IN AN ANNULAR HEAT EXCHANGER
- MAGNETIC FIELD EFFECT ON THE HEAT TRANSFER IN A NANOFLUID FILLED LID DRIVEN CAVITY WITH JOULE HEATING
- PROFESSOR SOMCHAI WONGWISES ON HIS 60TH BIRTHDAY
- OPTIMUM PARAMETRIC ANALYSIS BASED ON THERMODYNAMIC MODELING OF A COMPRESSION ABSORPTION CASCADE REFRIGERATION SYSTEM
- AN INTEGRATED MODEL TO STUDY THE EFFECTS OF OPERATIONAL PARAMETERS ON THE PERFORMANCE AND POLLUTANT EMISSIONS IN A UTILITY BOILER
- AN INTEGRATED MODEL TO STUDY THE EFFECTS OF OPERATIONAL PARAMETERS ON THE PERFORMANCE AND POLLUTANT EMISSIONS IN A UTILITY BOILER
- OPTIMIZATION OF GAS TURBINE POWER PLANT BY EVOLOUTIONARY ALGORITHM; CONSIDERING EXERGY, ECONOMIC AND ENVIRONMENTAL ASPECTS
- AN INVESTIGATION OF EFFECT OF CONTROL JETS LOCATION AND BLOWING PRESSURE RATIO TO CONTROL BASE PRESSURE IN SUDDENLY EXPANDED FLOWS
- A MATHEMATICAL MODEL FEATURING TIME LAG AND DECREMENT FACTOR TO ASSESS INDOOR THERMAL CONDITIONS IN LOW-INCOME-GROUP HOUSE
- NUMERICAL INVESTIGATIONSON FLOW CHARACTERISTICS OF SAND-WATER SLURRY THROUGH HORIZONTAL PIPELINE USING COMPUTATIONAL FLUID DYNAMICS
- AN INVESTIGATIVE METHODOLOGY THROUGH SOLID MODELLING AND NUMERICAL ANALYSIS FOR DESIGNING A THERMO-ELECTRIC GENERATOR SYSTEM
- MONTHLY DESIGNDATAFOR MAXIMUM SOLAR RADIATION FALLING ON COLLECTOR ARRAYS INBAGHDAD CITY
- OPTIMIZATION OF A NEW CONFIGURATION OF POWER TRI-GENERATION CYCLE BY THE USE OF A MULTI-PURPOSE GENETIC ALGORITHM
- EFFECT OF DEAN NUMBER ON THE HEAT TRANSFER CHARACTERISTICS OF A HELICAL COIL TUBE WITH VARIABLE VELOCITY& PRESSURE INLET
- SHIPPING EMISSION DISPERSIONS ON THE PORT OF AMBARLI VIA CFD MODELLING
- THE STRESS ANALYSIS ON TWO DIFFERENT ADHESIVELY BONDED T-JOINTS VIA 3D NONLINEAR FINITE ELEMENT METHOD
- PORTABLE SOLAR DRYING SYSTEM WITH INBUILT PV MODULE FOR STANDALONE FORCED CONVECTION OPERATION
- SOLAR HYDROGEN PRODUCTION BY THERMOCHEMICAL REACTION:DEVELOPMENT OF A PACKED-BED REACTOR
- DIFFERENTIAL TRANSFORMATION METHOD FOR ANALYSIS OF NONLINEAR FLOW AND MASS TRANSFER THROUGH A CHANNEL FILLED WITH A POROUS MEDIUM
- THERMOPHYSICAL PROPERTIES OF DEEP EUTECTIC SOLVENT-CARBON NANOTUBES (DES-CNT) BASED NANOLUBRICANT
- OPTIMIZATION OF THE PERFORMANCE OF VAPOUR COMPRESSION CYCLE USING LIQUID SUCTION LINE HEAT EXCHANGER
- INVESTIGATION OF MODIFIED EJECTOR CYCLE ON RESIDENTIAL AIR CONDITIONER WITH ENVIRONMENTALLY BENIGN REFRIGERANT OF R290
- ANALYSIS OF NEARLY ZERO ENERGY RESIDENTIAL BUILDING IN MUSCAT
- INVESTIGATION OF WASTE HEAT ENERGY IN A MARINE ENGINE WITH TRANSCRITICAL ORGANIC RANKINE CYCLE
- EFFECTS OF THICKNESS AND CAMBER RATIO ON FLOW CHARACTERISTICS OVER AIRFOILS
- 4E (ENERGY, EXERGY, ECONOMIC AND ENVIRONMENTAL) ANALYSIS OF THE NOVEL DESIGN OF WET COOLING TOWER
- ENTROPY GENERATION IN MHD FLOW OF VISCOELASTIC NANOFLUIDS WITH HOMOGENEOUS-HETEROGENEOUS REACTION, PARTIAL SLIP AND NONLINEAR THERMAL RADIATION
- MULTIFLUID DESCRIPTI ON OF RAREFIED GAS M IXTURE FLOWS
- CONSTRAINED GA PI SL IDING MODE CONTROL O F INDOOR CLIMATE COU PLED MIMO GREENHOUSE MODEL
- EXPERIMENTAL ANALYSIS AND KINETIC MODELLING FOR STEAM GASIFICATION OF THE TURKISH LIGNITES
- OPTIMIZATION OF THE VARIABLE REFRIGERANT FLOW SYSTEMS BY USE OF GENETIC ALGORITHM AND ENERGY, EXERGY, AND ECONOMIC ANALYSIS FOR THREE COOLANT FLUIDS
- OPTIMIZATION OF A SMALL SCALE CONCENTRATED SOLAR POWER PLANT USING RANKINE CYCLE
- ANALYZING THE IMPACT OF TEMPERATURE ON AXOPLASMIC FLUID PROPERTIES DEFINING NEURONAL EXCITATION
- PERFORMANCE ANALYSIS OF THE SINGLE JET AIR CURTAIN FOR OPEN REFRIGERATED DISPLAY CABINET BY USING ARTIFICIAL NEURAL NETWORK
- MATHEMATICAL MODELLING OF LOW GRADE THERMAL ENERGY STORAGE USING AN ENCAPSULATED LIQUID MEDIUM
- ON THE TURBULENT PRANDTL NUMBER IN STABLY STRATIFIED TURBULENCE BY SECOND ORDER MODELS
- CONSTRAINED GA PI SLIDING MODE CONTROL OF INDOOR CLIMATE COUPLED MIMO GREENHOUSE MODEL
- MULTIFLUID DESCRIPTION OF RAREFIED GAS MIXTURE FLOWS
- FLOW CHARACTERIZATION OF MULTI-PHASE PARTICULATE SLURRY IN THERMAL POWER PLANTS USING COMPUTATIONAL FLUID DYNAMICS
- A COMMENT ON UNSTEADY–PERIODIC FLOW FRICTION FACTOR: AN ANALYSIS ON EXPERIMENTAL DATA GATHERED IN PULSATILE PIPE FLOWS
- COMPARATIVE MAXIMUM POWER DENSITY ANALYSIS OF A SUPERCRITICAL $CO_2$ BRAYTON POWER CYCLE
- COMPARATIVE ANALYSIS OF CASCADE REFRIGERATION SYSTEM BASED ON ENERGY AND EXERGY USING DIFFERENT REFRIGERANT PAIRS
- NUMERICAL INVESTIGATION OF LAMINAR MIXED CONVECTION IN A SQUARE CROSS-SECTIONED CYLINDRICAL ANNULAR ENCLOSURE
- EXPERIMENTAL STUDY OF HYDROCARBON R290 IN WATER COOLER REFRIGERATION SYSTEM
- FLOW PERFORMANCE COMPARISON ALONG THE CENTERLINE IN STRAIGHT AND S-SHAPED DIFFUSER
- THERMODYNAMIC OPTIMIZATION OF AN IRREVERSIBLE REGENERATED BRAYTON HEAT ENGINE USING MODIFIED ECOLOGICAL CRITERIA
- OPTIMIZATION OF MICRO GAS TURBINE BY ECONOMIC, EXERGY AND ENVIRONMENT ANALYSIS USING GENETIC, BEE COLONY AND SEARCHING ALGORITHMS
- A PRACTICAL METHOD FOR DETERMINATION OF ECONOMIC INSULATION THICKNESS OF STEEL, PLASTIC AND COPPER HOT WATER PIPES
- ECONOMIC AND ENVIRONMENTAL IMPACTS OF THERMAL INSULATION USED IN DIFFERENT DUCT SIZES
- EFFECT OF MAGNETIC FIELD ORIENTATION ON NANOFLUID FREE CONVECTION IN A POROUS CAVITY: A HEAT VISUALIZATION STUDY
- PERFORMANCE AND ECOLOGICAL OBJECTIVE INVESTIGATION OF TWOSTATE IRREVERSIBLE QUANTUM HEAT ENGINE
- THERMAL ANALYSIS ON VARIABLE THICKNESS ABSORBER PLATE FIN IN FLATPLATE SOLAR COLLECTORS USING DIFFERENTIAL TRANSFORM METHOD
- AN APPROACH FOR INTERFACE CONDITION OF PHASE-CHANGE HEAT CONDUCTION IN CURVILINEAR COORDINATES
- COMPARATIVE MAXIMUM POWER DENSITY ANALYSIS OF A SUPERCRITICAL CO2 BRAYTON POWER CYCLE
- COMPARATIVE MAXIMUM POWER DENSITY ANALYSIS OF A SUPERCRITICAL CO2 BRAYTON POWER CYCLE
- PERFORMANCE AND ECOLOGICAL OBJECTIVE INVESTIGATION OF TWO-STATE IRREVERSIBLE QUANTUM HEAT ENGINE
- PERFORMANCE AND ECOLOGICAL OBJECTIVE INVESTIGATION OF TWO-STATE IRREVERSIBLE QUANTUM HEAT ENGINE
- THERMAL ANALYSIS ON VARIABLE THICKNESS ABSORBER PLATE FIN IN FLAT-PLATE SOLAR COLLECTORS USING DIFFERENTIAL TRANSFORM METHOD
- THERMAL ANALYSIS ON VARIABLE THICKNESS ABSORBER PLATE FIN IN FLAT-PLATE SOLAR COLLECTORS USING DIFFERENTIAL TRANSFORM METHOD
- ENVIRONMENTAL IMPACT OF USING GENERATORS IN THE UNIVERSITY OF TECHNOLOGY IN BAGHDAD, IRAQ
- MIXED CONVECTION IN A SINGLE-WALLED CARBON NANOTUBE-WATER NANOFLUID FILLED PARTIALLY HEATED TRIANGULAR LID-DRIVEN CAVITY HAVING AN ELASTIC BOTTOM WALL
- CHARACTERIZATION OF AEROGEL BASED THERMAL INSULATION BLANKETS, ECONOMICS, AND APPLICATIONS FOR DOMESTIC WATER HEATERS
- INVESTIGATION OF FLOW CHARACTERISTICS AND VORTEX FORMATIONS OF LAMBDA WING AT HIGH ANGLES OF ATTACK
- DEVELOPMENT OF AN EFFICIENT T-TYPE STRAINER WITH ITS PERFORMANCE EVALUATION
- PARAMETRIC STUDY OF THE NON-PREMIXED COAL COMBUSTION IN FURNACE FOR HEAT TRANSFER AND EMISSION CHARACTERISTICS
- COMPARATIVE ASSESSMENT OF THE EMISSION CHARACTERISTICS OF FIRST, SECOND AND THIRD GENERATION BIODIESELS AS FUEL IN A DIESEL ENGINE
- BIOGAS PRODUCTION FROM WASTE IN A SANITARY LANDFILL REACTOR
- EXPERIMENTAL AND COMPUTATIONAL INVESTIGATION OF FLAME HOLDERS IN COMBUSTION CHAMBERS AT DIFFERENT THERMAL LOADS
- EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF SOLAR FLUX DENSITY DISTRIBUTION OVER FLAT PLATE RECEIVER OF MODEL HELIOSTAT SYSTEM
- THERMODYNAMIC AND ENVIRONMENTAL COMPARATIVE INVESTIGATION AND OPTIMIZATION OF LANDFILL VS. INCINERATION FOR MUNICIPAL SOLID WASTE: A CASE STUDY IN VARAMIN, IRAN
- NUMERICAL INVESTIGATION OF THE BLADE PROFILE EFFECT ON THE AERODYNAMIC PERFORMANCE OF A VERTICAL-AXIS WIND TURBINE DARRIEUS H-ROTOR
- NUMERICAL INVESTIGATION OF DESIGN PARAMETERS EFFECTS ON PERFORMANCE OF COOLING SYSTEM DESIGNED FOR A LITHIUM-ION CELL
- AUTOMOTIVE HEADLAMP HIGH POWER LED COOLING SYSTEM AND ITS EFFECT ON JUNCTION TEMPERATURE AND LIGHT INTENSITY
- PREDICTING BOILER EFFICIENCY DETERIORATION USING ENERGY BALANCE METHOD: CASE STUDY IN 660 MW POWER PLANT JEPARA, CENTRAL JAVA, INDONESIA
- EXPERIMENTAL AND NUMERICAL INVESTIGATION OF CONTAMINANT CONTROL IN INTENSIVE CARE UNIT: A CASE STUDY OF RAIPUR, INDIA
- THE EFFECT OF THE USE OF DIFFERENT COVER MATERIALS ON HEAT TRANSFER IN FLAT SOLAR COLLECTORS
- OPTIMUM INSULATION THICKNESS FOR COLD STORAGE WALLS: CASE STUDY FOR TURKEY
- PERFORMANCE ASSESSMENT OF A MEDIUM-SCALE TURBOPROP ENGINE DESIGNED FOR UNMANNED AERIAL VEHICLE (UAV) BASED ON EXERGETIC AND SUSTAINABILITY METRICS
- IMPROVEMENT OF THERMAL ENERGY STORAGE BY INTEGRATING PCM INTO SOLAR SYSTEM
- DEVELOPMENT OF PASSIVE ENERGY SOURCE AS EARTH AIR PIPE HEAT EXCHANGERS (EAPHE) SYSTEM -A REVIEW
- A COMBINED EXPERIMENT-SIMULATION STUDY ON TEMPERATURE REGIME OF ROLLER-COMPACTED CONCRETE APPLYING FOR DAM CONSTRUCTION
- THERMAL PERFORMANCE ANALYSIS OF GLAZED AND UNGLAZED RECEIVER OF SCHEFFLER DISH
- ENHANCEMENT IN THERMO-HYDRAULIC PERFORMANCE OF MICROCHANNEL HEAT SINK WITH SECONDARY FLOWS OF LEAF VENATION PATTERN
- NUMERICAL AND EXPERIMENTAL INVESTIGATIONS ON PERFORMANCE EVALUATION OF A CONICAL OFFSET VORTEX GENERATOR INSERTS TO IMPROVE CONVECTIVE HEAT TRANSFER COEFFICIENT
- NUMERICAL EVALUATION OF THERMO-HYDRAULIC PERFORMANCE INDEX OF A DOUBLE PIPE HEAT EXCHANGER USING DOUBLE SIDED LOUVERED WINGLET TAPE
- EXPERIMENTAL INVESTIGATION OF AN ALUMINIUM THERMOSYPHON AT NORMAL OPERATING CONDITIONS
- AN EXPERIMENTAL INVESTIGATION ON RADIANT FLOOR HEATING SYSTEMS AT VARIOUS OPERATING CONDITIONS
- OPTIMIZATION OF BIODIESEL PRODUCTION FROM WASTE COOKING SUNFLOWER OIL BY TAGUCHI AND ANN TECHNIQUES
- THERMO-HYDRAULIC PERFORMANCE ANALYSIS OF PARABOLIC CONCENTRATING SOLAR WATER HEATER
- DEVELOPMENT OF PASSIVE ENERGY SOURCE AS EARTH AIR PIPE HEAT EXCHANGERS (EAPHE) SYSTEM - A REVIEW
- MONTHLY DESIGN DATA FOR MAXIMUM SOLAR RADIATION FALLING ON COLLECTOR ARRAYS IN BAGHDAD CITY
- EFFECT OF DEAN NUMBER ON THE HEAT TRANSFER CHARACTERISTICS OF A HELICAL COIL TUBE WITH VARIABLE VELOCITY & PRESSURE INLET
- NUMERICAL INVESTIGATIONS ON FLOW CHARACTERISTICS OF SAND-WATER SLURRY THROUGH HORIZONTAL PIPELINE USING COMPUTATIONAL FLUID DYNAMICS
- SOLAR HYDROGEN PRODUCTION BY THERMOCHEMICAL REACTION: DEVELOPMENT OF A PACKED-BED REACTOR
- COMPARISON STUDY OF AIR AND THERMAL OIL APPLICATION IN A SOLAR CAVITY RECEIVER
- UNSTEADY MHD MICROPOLAR FLUID IN A STRETCHING SHEET OVER AN INCLINED PLATE WITH THE EFFECT OF NON-LINEAR THERMAL RADIATION AND SORET-DUFOUR
- SHIP EMISSION ESTIMATION FOR IZMIR AND MERSIN INTERNATIONAL PORTS – TURKEY
- A NEW APPROACH FOR EVALUATING THE RANKINE CYCLE THROUGH ENTROPY GENERATION
- BIOHEAT EQUATION WITH FOURIER AND NON-FOURIER HEAT TRANSPORT LAWS: APPLICABILITY TO HEAT TRANSFER IN HUMAN TISSUES
- SECOND LAW ANALYSIS OF MIXED CONVECTION OF MAGNETOHYDRODYNAMIC FLOW IN AN INCLINED SQUARE LID-DRIVEN ENCLOSURE
- EFFECT OF THE GEOMETRICAL PARAMETERS IN A DOMESTIC BURNER WITH CRESCENT FLAME CHANNELS FOR AN OPTIMAL TEMPERATURE DISTRIBUTION AND THERMAL EFFICIENCY
- COMPUTATIONAL ASPECTS OF RADIATIVE TRANSFER EQUATION IN NONORTHOGONAL COORDINATES
- EMISSIONS AND PERFORMANCE CHARACTERISTICS OF AN SI ENGINE WITH BIOGAS FUEL AT DIFFERENT CO2 RATIOS
- EVALUATING INTEGRATION OF BIOMASS GASIFICATION PROCESS WITH SOLID OXIDE FUEL CELL AND TORREFACTION PROCESS
- COMBUSTION ANALYSIS OF CI ENGINE FUELLED WITH ALGAE BIOFUEL BLENDS
- ENERGY POTENTIAL FROM MUNICIPAL SOLID WASTE (MSW) FOR A DEVELOPING METROPOLIS
- NUMERICAL ANALYSIS OF FLAME CHARACTERISTICS AND STABILITY FOR CONICAL NOZZLE BURNER
- ASSESSING THE IMPACT OF PASSIVE COOLING ON THERMAL COMFORT IN LIG HOUSE USING CFD
- DETERMINATION OF CONVECTIVE, RADIATIVE, AND TOTAL HEAT TRANSFER CHARACTERISTICS OVER A RADIANT HEATED CEILING: A COMPUTATIONAL APPROACH
- DYNAMIC PERFORMANCE CHARACTERISTICS OF A THERMOELECTRIC GENERATOR
- A FLOW CHANNEL WITH NAFION MEMBRANE MATERIAL DESIGN OF PEMFUEL CELL
- INVESTIGATION OF LORENTZ FORCE EFFECT ON STEADY NANOFLUID FLOW AND HEAT TRANSFER THROUGH PARALLEL PLATES
- THERMAL EVALUATION OF CAVITY RECEIVER USING WATER/PG AS THE SOLAR WORKING FLUID
- THE INFLUENCE OF TEMPERATURE ON DISPERSION OF PARTICLES ON LIQUID SURFACES
- ENERGY AND EXERGY ANALYSIS OF A DOMESTIC REFRIGERATOR:APPROACHING A SUSTAINABLE REFRIGERATOR
- ENTROPY GENERATION RATE IN A MICROSCALE THIN FILM
- A FLOW CHANNEL WITH NAFION MEMBRANE MATERIAL DESIGN OF PEM FUEL CELL
- ENERGY AND EXERGY ANALYSIS OF A DOMESTIC REFRIGERATOR: APPROACHING A SUSTAINABLE REFRIGERATOR
- PARTICIPATING MEDIA FOR VOLUMETRIC HEAT GENERATION
- FIRST AND SECOND LAW EVALUATION OF COMBINED BRAYTON-ORGANIC RANKINE POWER CYCLE
- A CFD INVESTIGATION OF Al 2 O 3 /WATER FLOW IN A DUCT HAVING BACKWARD-FACING STEP
- A Feasibility Study of Solar Energy-Techno Economic Analysis From Aksaray City, Turkey
- NUMERICAL INVESTIGATION OF EFFECTS OF WORKING CONDITIONS ON PERFORMANCE OF PEM FUEL CELL
- EXPERIMENTAL INVESTIGATION OF NANO COMPRESSOR OIL EFFECT ON THE COOLING PERFORMANCE OF A VAPOR-COMPRESSION REFRIGERATION SYSTEM
- Exergetic Efficiency Analysis of a Combined Power Plant of a Container Ship
- ANALYTICAL DECOMPOSITION SOLUTIONS FOR HEAT TRANSFER ON STRAIGHT FINS WITH TEMPERATURE DEPENDENT THERMAL CONDUCTIVITY AND INTERNAL HEAT GENERATION
- NUMERICAL SIMULATION OF NATURAL CONVECTION MELTING IN 2D AND 3D ENCLOSURES
- DESIGN, DEVELOPMENT AND FABRICATION OF A MIST SPRAY DIRECT EVAPORATIVE COOLING SYSTEM AND ITS PERFORMANCE EVALUATION
- THERMODYNAMIC PERFORMANCE ANALYSIS OF GAS LIQUEFACTION CYCLES FOR CRYOGENIC APPLICATIONS
- A CFD INVESTIGATION OF Al2O3/WATER FLOW IN A DUCT HAVING BACKWARD-FACING STEP
- REVIEW ON POST TREATMENT EMISSION C ONTROL TECHNIQUE BY APPLICATION OF DIESE L OXIDATION CATALYSI S AND DIESEL PARTICU LATE FILTRATION
- EFFECT OF DIFFERENT LEVELS OF HYDROGEN + LPG ADDITION ON EMISSIONS AND PERFORMANCE OF A COMPRESSION IGNITION ENGINE
- PERFORMANCE ASSESSME NT OF PHOSPHORIC ACI D FUEL CELL THERMOELECTRIC GENER ATOR HYBRID SYSTEM W ITH ECONOMIC ASPECT
- DESIGN, PRODUCE AND CONTROL OF A 2-DOF UPPER LIMB EXOSKELETAL ROBOT
- MAGNETOHYDRODYNAMIC FLOW IN A TRUNCATED CONICAL ENCLOSURE
- EXPERIMENTAL INVESTI GATION AND PERFORMAN CE OPTIMIZATION OF A CROSS FLOW HEAT EXCH ANGER BY ENTROPY GEN ERATION MINIMIZATION APPROACH
- DRYING CHARACTERISTICS INVESTIGATION OF BLACK MULBERRY DRIED VIA INFRARED METHOD
- THERMOECONOMIC ANALY SIS OF BIOGAS ENGINE S POWERED COGENERATI ON SYSTEM
- EFFECTS OF KAOLIN ADDITIONS ON THERMAL BEHAVIORS OF RIGID POLYURETHANE FOAMS
- A REVIEW OF GENERAL AND MODERN METHODS O F AIR PURIFICATION
- SELECTION CRITERIA FOR FUSION REACTOR STRUCTURES
- METHOD OF INDIRECT DETERMINATION OF THERMAL LOAD PARAMETER
- CFD ANALYSIS OF LAMINAR FORCED CONVECTIVE HEAT TRANSFER FOR TiO2/WATER NANOFLUID IN A SEMI CIRCULAR CROSS SECTIONED MICRO CHANNEL
- GEOMETRY EFFECTS ON THERMOHYDRAULIC BEHAVIOR OF FLUID FLOW IN A SQUARE ENCLOSURE WITH AN INNER CIRCULAR TUBE
- PERFORMANCE PREDICTIONS OF AIR-COOLED CONDENSERS HAVING CIRCULAR AND ELLIPTIC CROSS-SECTIONS WITH ARTIFICIAL NEURAL NETWORKS
- RESPONSE SURFACE BASED OPTIMIZATION OF RIBBED ISOSCELES TRIANGULAR TWISTED TAPE HEAT EXCHANGER USING ENTROPY AUGMENTATION GENERATION NUMBER WITH AL2O3 NANO WORKING FLUID
- OPERATION OF HVAC SY STEM FOR ENERGY SAVI NGS AND ECONOMIC ANALYSIS
- STUDY OF THE EFFECT OF THE POROUS PLATES ON THE TANK BOTTOM ON THE BOILING PROCESS
- THERMOECONOMIC ANALYSIS OF A WATER TO WATER HEAT PUMP UNDER DIFFERENT CONDENSER AND EVAPORATOR CONDITIONS
- NUMERICAL ANALYSES ON THE PREDICTION OF NUSSELT NUMBERS FOR UPWARD AND DOWNWARD FLOWS OF WATER IN A SMOOTH PIPE: EFFECTS OF BUOYANCY AND PROPERTY VARIATIONS
- EXERGY ANALYSIS OF THE ORGANIC RANKINE CYCLE BASED ON THE PINCH POINT TEMPERATURE DIFFERENCE
- HEAT TRANSFER AND FRICTION CHARACTERISTICS OF AN ARRAY OF PERFORATED FINS UNDER LAMINAR FORCED CONVECTION
- OPERATION OF HVAC SYSTEM FOR ENERGY SAVINGS AND ECONOMIC ANALYSIS
- CFD ANALYSIS OF LAMINAR FORCED CONVECTIVE HEAT TRANSFER FOR TiO2/WATER NANOFLUID IN A SEMI-CIRCULAR CROSS-SECTIONED MICRO-CHANNEL
- CFD ANALYSIS OF LAMINAR FORCED CONVECTIVE HEAT TRANSFER FOR TiO2/WATER NANOFLUID IN A SEMI-CIRCULAR CROSS-SECTIONED MICRO-CHANNEL
- MULTI OBJECTIVE OPTIMIZATION OF A R744/R134A CASCADE REFRIGERATION SYSTEM: EXERGETIC, ECONOMIC, ENVIRONMENTAL, AND SENSITIVE ANALYSIS (3ES)
- ENERGY AND EXERGY ANALYSIS OF A VAPOR ABSORPTION REFRIGERATION SYSTEM IN AN INTERCITY BUS APPLICATION
- PARAMETRIC ANALYSIS OF ELECTRICAL ENERGY PRODUCTION BY WIND ENERGY FOR BOZCAADA
- COST EFFECTIVE OPERA TION OF HVAC SYSTEM UNDER THERMAL DISTURBANCE
- STATISTICAL ANALYSIS OF WIND SPEED DISTRI BUTION WITH SINOP TURKEY APPLICATION
- A PROPER SELECTION OF HOT AND COLD UTILITIES IN A PLANT CONTAINING MULTIPLE HEAT EXCHANGER NETWORKS
- DETERMINATION OF SOM E DOMESTIC RADIATORS’ THERMAL CAPACITY NUMERICALLY
- THERMODYNAMIC PERFORMANCE ANALYSIS OF DEDICATED MECHANICALLY SUBCOOLED VAPOUR COMPRESSION REFRIGERATION SYSTEM
- NUMERICAL SIMULATION AND ANALYSIS OF HEAT TRANSFER FOR DIFFERENT GEOMETRIES OF CORRUGATED TUBES IN A DOUBLE PIPE HEAT EXCHANGER
- THERMO ENVIRONMENTAL ANALYSIS AND MULTI OBJECTIVE OPTIMIZATION OF PERFORMANCE OF ERICSSON ENGINE IMPLEMENTING AN EVOLUTIONARY ALGORITHM
- STATISTICAL ANALYSIS OF WIND SPEED DISTRIBUTION WITH SINOP-TURKEY APPLICATION
- STATISTICAL ANALYSIS OF WIND SPEED DISTRIBUTION WITH SINOP-TURKEY APPLICATION
- DETERMINATION OF SOME DOMESTIC RADIATORS’ THERMAL CAPACITY NUMERICALLY
- THERMO-ENVIRONMENTAL ANALYSIS AND MULTI-OBJECTIVE OPTIMIZATION OF PERFORMANCE OF ERICSSON ENGINE IMPLEMENTING AN EVOLUTIONARY ALGORITHM
- THERMO-ENVIRONMENTAL ANALYSIS AND MULTI-OBJECTIVE OPTIMIZATION OF PERFORMANCE OF ERICSSON ENGINE IMPLEMENTING AN EVOLUTIONARY ALGORITHM
- COST EFFECTIVE OPERATION OF HVAC SYSTEM UNDER THERMAL DISTURBANCE
- MULTI-OBJECTIVE OPTIMIZATION OF A R744/R134A CASCADE REFRIGERATION SYSTEM: EXERGETIC, ECONOMIC, ENVIRONMENTAL, AND SENSITIVE ANALYSIS (3ES)
- MULTI-OBJECTIVE OPTIMIZATION OF A R744/R134A CASCADE REFRIGERATION SYSTEM: EXERGETIC, ECONOMIC, ENVIRONMENTAL, AND SENSITIVE ANALYSIS (3ES)
- EXPERIMENTAL INVESTIGATION AND PERFORMANCE OPTIMIZATION OF A CROSS FLOW HEAT EXCHANGER BY ENTROPY GENERATION MINIMIZATION APPROACH
- PERFORMANCE ASSESSMENT OF PHOSPHORIC ACID FUEL CELL - THERMOELECTRIC GENERATOR HYBRID SYSTEM WITH ECONOMIC ASPECT
- A REVIEW OF GENERAL AND MODERN METHODS OF AIR PURIFICATION
- REVIEW ON POST-TREATMENT EMISSION CONTROL TECHNIQUE BY APPLICATION OF DIESEL OXIDATION CATALYSIS AND DIESEL PARTICULATE FILTRATION
- THERMOECONOMIC ANALYSIS OF BIOGAS ENGINES POWERED COGENERATION SYSTEM
- PERFORMANCE ASSESSMENT OF PHOSPHORIC ACID FUEL CELL - THERMOELECTRIC GENERATOR HYBRID SYSTEM WITH ECONOMIC ASPECT
- REVIEW ON POST-TREATMENT EMISSION CONTROL TECHNIQUE BY APPLICATION OF DIESEL OXIDATION CATALYSIS AND DIESEL PARTICULATE FILTRATION
- THE EFFECT OF COOLING ON MECHANICAL AND THERMAL STRESSES IN VASCULAR STRUCTURES
- COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF FLOW AND COMBUSTION OF A DIESEL ENGINE
- UTILIZATION OF BASIC MULTI-LAYER PERCEPTRON ARTIFICIAL NEURAL NETWORKS TO RESOLVE TURBULENT FINE STRUCTURE CHEMICAL KINETICS APPLIED TO A CFD MODEL OF A METHANE/AIR PILOTED JET FLAME
- INVESTIGATION OF INFRARED DRYING OF POMEGRANATE BY-PRODUCTS
- PERFORMANCE ASSESSMENT OF A COGENERATION SYSTEM IN FOOD INDUSTRY
- NUMERICAL SIMULATION OF NATURAL CONVECTION IN A POROUS CAVITY FILLED WITH FERROFLUID IN PRESENCE OF MAGNETIC SOURCE
- EXPERIMENTAL INVESTIGATION ON AL6061 SILVER COATED COPPER METAL MATRIX COMPOSITE CIRCULAR EXTENDED SURFACES PRE AND POST HEAT TREATMENT
- EFFECT OF TIME HORIZON ON WIND SPEED PREDICTION WITH ANN
- NUMERICAL INVESTIGATION OF BLOOD FLOW FEATURES IN INTRACRANIAL SACCULAR ANEURYSMS
- EFFECT OF HYDROGEN ADDITION AT DIFFERENT LEVELS ON EMISSIONS AND PERFORMANCE OF A DIESEL ENGINE
- MICROWAVE DEHYDRATION MODELLING OF TINCALCONITE
- EFFECT OF PRE-TREATMENT AND AIR TEMPERATURE ON DRYING TIME OF CHERRY TOMATO
- NUMERICAL INVESTIGATION OF HEAT TRANSFER FROM A POROUS PLATE WITH TRANSPIRATION COOLING
- COMPUTATIONAL ANALYSIS OF INSERTED POROUS BLOCKS INTO HORIZONTAL CONCENTRIC ANNULI IN MIXED CONVECTION MODE
- PERFORMANCE ANALYSIS OF R22 AND ITS SUBSTITUTES IN AIR CONDITIONERS
- THIN LAYER DRYING MODELING OF APPLES AND APRICOTS IN A SOLAR- ASSISTED DRYING SYSTEM
- THERMODYNAMIC MODELING OF A PULSE TUBE REFRIGERATION SYSTEM
- HEAT TRANSFER CHARACTERISTICS OF PROPYLENE GLYCOL/WATER BASED MAGNESIUM OXIDE NANOFLUID FLOWING THROUGH STRAIGHT TUBES AND HELICAL COILS
- THEORETICAL INVESTIGATION OF A SOLAR AIR HEATER ROUGHENED BY RIBS AND GROOVES
- RECEIVER TEMPERATURE MAPS OF PARABOLIC COLLECTOR USED FOR SOLAR FOOD COOKING APPLICATION IN ALGERIA
- NATURAL CONVECTION OF A NANOFLUID IN A CONICAL CONTAINER
- THIN LAYER DRYING MODELING OF APPLES AND APRICOTS IN A SOLAR-ASSISTED DRYING SYSTEM
- THERMODYNAMIC ANALYSIS OF BASIC AND REGENERATIVE ORGANIC RANKINE CYCLES USING DRY FLUIDS FROM WASTE HEAT RECOVERY
- THE EFFECT OF SYSTEM PARAMETERS ON THE CONDENSATION PERFORMANCE OF HEAT PUMP SYSTEM USING R290
- EXERGO-ECONOMIC ANALYSIS OF MICROCHANNELS IN SINGLE-PHASE FLOW
- THERMAL PERFORMANCE ANALYSIS OF CONVECTIVE-RADIATIVE FIN WITH TEMPERATURE-DEPENDENT THERMAL CONDUCTIVITY IN THE PRESENCE OF UNIFORM MAGNETIC FIELD USING PARTIAL NOETHER METHOD
- NUMERICAL INVESTIGATION OF FLOW AND HEAT TRANSFER IN COMMUNICATING CONVERGING AND DIVERGING CHANNELS
- VARIABLE CAPACITY ABSORPTION COOLING SYSTEM PERFORMANCE FOR BUILDING APPLICATION
- PARAMETRIC ANALYSIS OF THERMAL PERFORMANCE OF RANQUE-HILSCH VORTEX TUBE
- MATHEMATICAL CALCULATION AND EXPERIMENTAL INVESTIGATION OF EXPANDED PERLITE BASED HEAT INSULATION MATERIALS’ THERMAL CONDUCTIVITY VALUES
- NUMERICAL INVESTIGATION OF FORCED CONVECTION OF NANOFLUID IN MICROCHANNELS HEAT SINKS
- NUMERICAL INVESTIGATION OF FORCED CONVECTION OF NANOFLUID IN MICROCHANNELS HEAT SINKS
- COMPARISON OF THERMOECONOMIC COST CALCULATION FOR A BINARY GEOTHERMAL POWER PLANT
- COMPARISON OF THERMOECONOMIC COST CALCULATION FOR A BINARY GEOTHERMAL POWER PLANT
- EXPERIMENTAL INVESTIGATION OF MONOCRYSTALLINE AND POLYCRYSTALLINE SOLAR MODULES AT DIFFERENT INCLINATION ANGLES
- A HYBRID NUMERICAL/EXPERIMENTAL STUDY OF THE AERODYNAMIC NOISE PREDICTION
- PERFORMANCE ANALYSIS OF A DIESEL ENGINE WITHIN A MULTI- DIMENSIONAL FRAMEWORK
- DEVELOPMENT OF A COOLING DIE USED IN PLASTIC PIPE PROCESSING: NUMERICAL AND EXPERIMENTAL ANALYSIS
- ANALYSIS OF THE EFFECT OF PROPELLANT TEMPERATURE ON INTERIOR BALLISTICS PROBLEM
- APPLICATION OF NANOTECHNOLOGY TO IMPROVE THE PERFORMANCE OF TRACTOR RADIATOR USING CU-WATER NANOFLUID
- DESTINATION MARKETING ACTIVITIES FOR SUSTAINABLE URBAN DEVELOPMENT (FOLLOWING THE EXAMPLE OF THE TOWN OF PLEVEN)
- DEVELOPMENT OF SEMI-CONTINUOUS SOLAR POWERED ADSORPTION WATER CHILLER FOR FOOD PRESERVATION
- A NEW ANALYTICAL INVESTIGATION OF NATURAL CONVECTION OF NON- NEWTONIAN NANOFLUIDS FLOW BETWEEN TWO VERTICAL FLAT PLATES BY THE GENERALIZED DECOMPOSITION METHOD (GDM)
- THE EFFECT OF BLOWING DIRECTION ON HEAT SINK PERFORMANCE BY THERMAL IMAGING
- COMPARATIVE ENERGY AND EXERGY ANALYSIS OF A POWER PLANT WITH SUPER-CRITICAL AND SUB-CRITICAL
- EXPERIMENTAL EXAMINATION OF HEAT TRANSFER PERFORMANCE OF THE HEATED RADIANT WALL SYSTEM
- NUMERICAL STUDY OF MILK FOULING THICKNESS IN THE CHANNEL OF PLATE HEAT EXCHANGER
- CFD SIMULATION OF THERMO-AERAULIC FIELDS IN A CHANNEL WITH MULTIPLE BAFFLE PLATES
- INVESTIGATION OF NATURAL CONVECTION HEAT TRANSFER AT CONSTANT HEAT FLUX ALONG A VERTICAL AND INCLINED PLATE
- NUMERICAL INVESTIGATION OF COOLING A RIBBED MICROCHANNEL USING NANOFLUID
- ENERGY CONSUMPTION OF DEFROSTING PROCESS IN NO-FROST REFRIGERATORS
- A REVIEW OF SINGLE-PHASE AND TWO-PHASE PRESSURE DROP CHARACTERISTICS AND FLOW BOILING INSTABILITIES IN MICROCHANNELS
- A NEW ANALYTICAL INVESTIGATION OF NATURAL CONVECTION OF NON-NEWTONIAN NANOFLUIDS FLOW BETWEEN TWO VERTICAL FLAT PLATES BY THE GENERALIZED DECOMPOSITION METHOD (GDM)
- A NUMERICAL STUDY OF FORCED CONVECTIVE FLOW IN MICROCHANNELS HEAT SINKS WITH PERIODIC EXPANSION-CONSTRICTION CROSS SECTION
- AEROTHERMAL OPTIMIZATION OF SQUEALER GEOMETRY IN AXIAL FLOW TURBINES USING GENETIC ALGORITHM
- EFFECTS OF HEATER DIMENSIONS ON NANOFLUID NATURAL CONVECTION IN A HEATED INCINERATOR SHAPED CAVITY CONTAINING A HEATED BLOCK
- ANALYSIS OF VAPOUR COMPRESSION REFRIGERATION (VCR) BASED AIR CONDITIONING (AC) SYSTEM FOR HOT AND DRY CLIMATIC CONDITIONS IN OMAN
- SOLAR ENERGY CONTROL AND POWER QUALITY IMPROVEMENT USING MULTILAYER FEED FORWARD NEURAL NETWORK
- PERFORMANCE ANALYSIS AND THERMODYNAMIC MODELING OF A POLY GENERATION SYSTEM BY INTEGRATING A MULTI-EFFECT-DESALINATION THERMO-VAPOR COMPRESSION (MED-TVC) SYSTEM WITH A COMBINED COOLING, HEATING AND POWER (CCHP) SYSTEM
- A REVIEW OF FLOW BOILING IN MINI AND MICROCHANNEL FOR ENHANCED GEOMETRIES
- INVESTIGATION OF THE EFFECT OF THE PRIMARY NOZZLE THROAT DIAMETER ON THE EVAPORATOR PERFORMANCE OF AN EJECTOR EXPANSION REFRIGERATION CYCLE
- THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION
- THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION
- ALTERNATIVE REFRIGERANTS FOR HCFC 22—A REVIEW
- ALTERNATIVE REFRIGERANTS FOR HCFC 22—A REVIEW
- ADVANCED NUMERICAL AND EXPERIMENTAL STUDIES ON CI ENGINE EMISSIONS
- ADVANCED NUMERICAL AND EXPERIMENTAL STUDIES ON CI ENGINE EMISSIONS
- THERMO-FLUIDIC PARAMETERS EFFECTS ON NONLINEAR VIBRATION OF FLUID-CONVEYING NANOTUBE RESTING ON ELASTIC FOUNDATIONS USING HOMOTOPY PERTURBATION METHOD
- THERMO-FLUIDIC PARAMETERS EFFECTS ON NONLINEAR VIBRATION OF FLUID-CONVEYING NANOTUBE RESTING ON ELASTIC FOUNDATIONS USING HOMOTOPY PERTURBATION METHOD
- EXERGO-SUSTAINABILITY ANALYSIS AND ECOLOGICAL FUNCTION OF A SIMPLE GAS TURBINE AERO-ENGINE
- EXERGO-SUSTAINABILITY ANALYSIS AND ECOLOGICAL FUNCTION OF A SIMPLE GAS TURBINE AERO-ENGINE
- PERFORMANCE ANALYSIS OF A DIESEL ENGINE WITHIN A MULTI-DIMENSIONAL FRAMEWORK
- POWER GENERATION FROM COMBUSTED “SYNGAS” USING HYBRID THERMOELECTRIC GENERATOR AND FORECASTING THE PERFORMANCE WITH ANN TECHNIQUE
- POWER GENERATION FROM COMBUSTED “SYNGAS” USING HYBRID THERMOELECTRIC GENERATOR AND FORECASTING THE PERFORMANCE WITH ANN TECHNIQUE
- ADVANCED EXERGY ANALYSIS OF AN ORGANIC RANKINE CYCLE WASTE HEAT RECOVERY SYSTEM OF A MARINE POWER PLANT
- NUMERICAL SIMULATION OF FILM COOLING A TURBINE BLADE THROUGH A ROW OF HOLES
- EXPERIMENTAL INVESTIGATION OF INDIRECT EVAPORATIVE COOLER USING CLAY PIPE
- INVESTIGATION OF NEWTONIAN AND NON-NEWTONIAN DROPLETS IN COLLISION WITH THE HEATED ULTRAPHOBIC SURFACE ON VARIOUS WEBER NUMBERS
- EXPERIMENTAL VALIDATION OF LMTD METHOD FOR MICROSCALE HEAT TRANSFER
- THE EFFECT OF DIFFERENT TYPES OF CORE MATERIAL ON THE FLEXURAL BEHAVIOR OF SANDWICH COMPOSITES FOR WIND TURBINE BLADES
- EFFECT OF FLOW STRUCTURE ON HEAT TRANSFER IN COMPACT HEAT EXCHANGER BY USING FINITE THICKNESS WINGLET AT ACUTE ANGLE
- PERFORMANCE ANALYSIS OF A STEAM TURBINE POWER PLANT AT PART LOAD CONDITIONS
- Exergy Based Optimization of a Biomass and Solar Fuelled CCHP Hybrid Seawater Desalination Plant
- Determination of 1/V-T (P, Constant) Diagrams of Hydrogen Gases by Graph-Analytical Methods
- Experimental Investigation of Dual-Purpose Solar Collector using with Rectangular Channels
- An Experimental Study on a Bus Air Conditioner to Determine its Conformity to Design and Comfort Conditions
- Application of an Aggregation Technique to Facility Layout Design Selection
- The Importance of Internal Heat Gains for Building Cooling Design
- Optimum Orientation of a Mutually-Shaded Group of Buildings with Respect to External Solar Radiation
- Study of Solar Driven Adsorption Cooling Potential in Indonesia
- RANS NUMERICAL SIMULATION OF LEAN PREMIXED BLUFF BODY STABILIZED COMBUSTOR: COMPARISON OF TURBULENCE MODELS
- AERODYNAMICS ASSESSMENT USING CFD FOR A LOW DRAG SHELL ECO-MARATHON CAR
- THERMODYNAMIC ANALYSIS OF A FLUIDIZED BED COAL COMBUSTOR STEAM PLANT IN TEXTILE INDUSTRY
- THE MICRO-SCALE MODELING BY EXPERIMENTAL STUDY IN PEM FUEL CELL
- ADVANCES IN ZERO ENERGY TRANSPORTATION SYSTEMS
- SENSITIVITY ANALYSIS OF COAL GASIFICATION IN TWO-STAGE ENTRAINED-FLOW GASIFIER: SYNGAS AND CARBON CONVERSION PREDICTION
- A NONLINEAR CONSTITUTIVE THEORY FOR HEAT CONDUCTION IN LAGRANGIAN DESCRIPTION BASED ON INTEGRITY
- STUDY OF AXISYMMETRIC NATURE IN 3-D SWIRLING FLOW IN A CYLINDRICAL ANNULUS WITH A TOP ROTATING LID UNDER THE INFLUENCE OF AXIAL TEMPERATURE GRADIENT OR AXIAL MAGNETIC FIELD
- EXPERIMENTAL STUDY ON TURNING WITH SELF-PROPELLED ROTARY CUTTING TOOL
- FEM ANALYSES OF LOW VELOCITY IMPACT BEHAVIOUR OF SANDWICH PANELS WITH EPS FOAM CORE
- RANS NUMERICAL SIMULATION OF LEAN PREMIXED BLUFF BODY STABILIZED COMBUSTOR: COMPARISON OF TURBULENCE MODELS
- AERODYNAMICS ASSESSMENT USING CFD FOR A LOW DRAG SHELL ECO-MARATHON CAR
- THERMODYNAMIC ANALYSIS OF A FLUIDIZED BED COAL COMBUSTOR STEAM PLANT IN TEXTILE INDUSTRY
- THE MICRO-SCALE MODELING BY EXPERIMENTAL STUDY IN PEM FUEL CELL
- ADVANCES IN ZERO ENERGY TRANSPORTATION SYSTEMS
- SENSITIVITY ANALYSIS OF COAL GASIFICATION IN TWO-STAGE ENTRAINED-FLOW GASIFIER: SYNGAS AND CARBON CONVERSION PREDICTION
- A NONLINEAR CONSTITUTIVE THEORY FOR HEAT CONDUCTION IN LAGRANGIAN DESCRIPTION BASED ON INTEGRITY
- STUDY OF AXISYMMETRIC NATURE IN 3-D SWIRLING FLOW IN A CYLINDRICAL ANNULUS WITH A TOP ROTATING LID UNDER THE INFLUENCE OF AXIAL TEMPERATURE GRADIENT OR AXIAL MAGNETIC FIELD
- EXPERIMENTAL STUDY ON TURNING WITH SELF-PROPELLED ROTARY CUTTING TOOL
- FEM ANALYSES OF LOW VELOCITY IMPACT BEHAVIOUR OF SANDWICH PANELS WITH EPS FOAM CORE
- APPLICATION OF A NOVEL THERMO-ECOLOGICAL PERFORMANCE CRITERION: EFFECTIVE ECOLOGICAL POWER DENSITY (EFECPOD) TO A JOULE-BRAYTON CYCLE (JBC) TURBINE
- NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER
- TWO- AND THREE-DIMENSIONAL TRANSIENT ANALYSIS OF FLOW AND HEAT TRANSFER IN STRUCTURES WITH DOMICAL AND CURVED ROOFS
- AN EXPERIMENTAL STUDY ON SUBCOOLING PROCESS OF A TRANSCRITICAL CO2 AIR CONDITIONING CYCLE WORKING WITH MICROCHANNEL EVAPORATOR
- PERFORMANCE ANALYZING OF AN ORGANIC RANKINE CYCLE UNDER DIFFERENT AMBIENT CONDITIONS
- EXERGETIC OPTIMIZATION OF PHOSPHORIC ACID FACTORY POWER PLANT
- NUMERICAL STUDY OF PRESSURE DROP AND HEAT TRANSFER IN A STRAIGHT RECTANGULAR AND SEMI CYLINDRICAL PROJECTIONS MICROCHANNEL HEAT SINK
- UNSTEADY NUMERICAL SIMULATION OF TURBULENT FORCED CONVECTION IN A RECTANGULAR PIPE PROVIDED WITH WAVED POROUS BAFFLES
- APPLICATION OF A NOVEL THERMO-ECOLOGICAL PERFORMANCE CRITERION: EFFECTIVE ECOLOGICAL POWER DENSITY (EFECPOD) TO A JOULE-BRAYTON CYCLE (JBC) TURBINE
- NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER
- TWO- AND THREE-DIMENSIONAL TRANSIENT ANALYSIS OF FLOW AND HEAT TRANSFER IN STRUCTURES WITH DOMICAL AND CURVED ROOFS
- AN EXPERIMENTAL STUDY ON SUBCOOLING PROCESS OF A TRANSCRITICAL CO2 AIR CONDITIONING CYCLE WORKING WITH MICROCHANNEL EVAPORATOR
- PERFORMANCE ANALYZING OF AN ORGANIC RANKINE CYCLE UNDER DIFFERENT AMBIENT CONDITIONS
- EXERGETIC OPTIMIZATION OF PHOSPHORIC ACID FACTORY POWER PLANT
- NUMERICAL STUDY OF PRESSURE DROP AND HEAT TRANSFER IN A STRAIGHT RECTANGULAR AND SEMI CYLINDRICAL PROJECTIONS MICROCHANNEL HEAT SINK
- UNSTEADY NUMERICAL SIMULATION OF TURBULENT FORCED CONVECTION IN A RECTANGULAR PIPE PROVIDED WITH WAVED POROUS BAFFLES
- IMPACTS OF NANOSCALE INCLUSIONS ON FIRE RETARDANCY, THERMAL STABILITY, AND MECHANICAL PROPERTIES OF POLYMERIC PVC NANOCOMPOSITES
- DESIGN AND SIMULATION OF A NOVEL C-DEP MICROFLUIDICS FOR SINGLE CELL TRAPPING
- ELECTRONIC MEASUREMENT OF WEATHER CONDITIONS FOR AN ENGINE TEST ROOM
- VASCULAR STRUCTURES FOR SMART FEATURES: SELF-COOLING AND SELF-HEALING
- EFFECT OF UNIAXIAL INITIAL STRESSES, PIEZOELECTRICITY AND THIRD ORDER ELASTIC CONSTANTS ON THE NEAR-SURFACE WAVES IN A STRATIFIED HALF-PLANE
- PERFORMANCE INDICES OF SOFT COMPUTING MODELS TO PREDICT THE HEAT LOAD OF BUILDINGS IN TERMS OF ARCHITECTURAL INDICATORS
- CHEMICAL AND THERMAL INVESTIGATIONS OF ELECTROSPUN POLYACRYLONITRILE NANOFIBERS INCORPORATED WITH VARIOUS NANOSCALE INCLUSIONS
- PERFORMANCE MAP MEASUREMENT, ZERO-DIMENSIONAL MODELLING & VIBRATION ANALYSIS OF A SINGLE CYLINDER DIESEL ENGINE
- OPTIMIZATION STUDY OF THE OPERATING CONDITIONS TO IMPROVE THE QUALITY OF SURFACES COATING OBTAINED BY PLASMA SPRAYING PROCESS
- INVESTIGATION OF CHARACTERIZATION AND COMPOSITION OF DENTAL WASTES IN SAMSUN CITY CENTER
- IMPACTS OF NANOSCALE INCLUSIONS ON FIRE RETARDANCY, THERMAL STABILITY, AND MECHANICAL PROPERTIES OF POLYMERIC PVC NANOCOMPOSITES
- DESIGN AND SIMULATION OF A NOVEL C-DEP MICROFLUIDICS FOR SINGLE CELL TRAPPING
- ELECTRONIC MEASUREMENT OF WEATHER CONDITIONS FOR AN ENGINE TEST ROOM
- VASCULAR STRUCTURES FOR SMART FEATURES: SELF-COOLING AND SELF-HEALING
- EFFECT OF UNIAXIAL INITIAL STRESSES, PIEZOELECTRICITY AND THIRD ORDER ELASTIC CONSTANTS ON THE NEAR-SURFACE WAVES IN A STRATIFIED HALF-PLANE
- PERFORMANCE INDICES OF SOFT COMPUTING MODELS TO PREDICT THE HEAT LOAD OF BUILDINGS IN TERMS OF ARCHITECTURAL INDICATORS
- CHEMICAL AND THERMAL INVESTIGATIONS OF ELECTROSPUN POLYACRYLONITRILE NANOFIBERS INCORPORATED WITH VARIOUS NANOSCALE INCLUSIONS
- PERFORMANCE MAP MEASUREMENT, ZERO-DIMENSIONAL MODELLING & VIBRATION ANALYSIS OF A SINGLE CYLINDER DIESEL ENGINE
- OPTIMIZATION STUDY OF THE OPERATING CONDITIONS TO IMPROVE THE QUALITY OF SURFACES COATING OBTAINED BY PLASMA SPRAYING PROCESS
- INVESTIGATION OF CHARACTERIZATION AND COMPOSITION OF DENTAL WASTES IN SAMSUN CITY CENTER
- The Effects of Coolant Pipe Geometry and Flow Conditions on Turbine Blade Film Cooling
- The Effects of Coolant Pipe Geometry and Flow Conditions on Turbine Blade Film Cooling
- THE RENEWABLE ENERGY POTENTIAL OF TURKISH COASTS AND A CONCEPT DESIGN OF A NEAR SHORE SEA PLATFORM
- THE RENEWABLE ENERGY POTENTIAL OF TURKISH COASTS AND A CONCEPT DESIGN OF A NEAR SHORE SEA PLATFORM
- DESIGN BASIS ACCIDENT ANALYSIS OF A SMALL MODULAR REACTOR
- DESIGN BASIS ACCIDENT ANALYSIS OF A SMALL MODULAR REACTOR
- ANALYSIS ON SOLAR PANEL PERFORMANCE AND PV-INVERTER CONFIGURATION FOR TROPICAL REGION
- ANALYSIS ON SOLAR PANEL PERFORMANCE AND PV-INVERTER CONFIGURATION FOR TROPICAL REGION
- A LIME PRODUCTION OF THE FLUIDIZED BED BOILER’S ENERGY AND EXERGY ANALYSE
- A LIME PRODUCTION OF THE FLUIDIZED BED BOILER’S ENERGY AND EXERGY ANALYSE
- EFFECT OF ROOF POND ON THE ENERGY AND EXERGY PERFORMANCE OF A SINGLE SPACE BUILDING
- EFFECT OF ROOF POND ON THE ENERGY AND EXERGY PERFORMANCE OF A SINGLE SPACE BUILDING
- TESTING AND ANALYSIS OF LOW PRESSURE, TRANSPARENT TUBE SOLAR RECEIVER FOR THE SUNSPOT CYCLE
- TESTING AND ANALYSIS OF LOW PRESSURE, TRANSPARENT TUBE SOLAR RECEIVER FOR THE SUNSPOT CYCLE
- EXPERIMENTAL PERFORMANCE OF R134a AND R152a USING MICROCHANNEL CONDENSER
- MICROFLUIDIC TECHNOLOGY AND ITS BIOMEDICAL APPLICATIONS
- Control of Wake and Vortex Shedding Behind Solid Circular Obstacle by Magnetohydrodynamics
- Nature Inspired Optimal Design of Heat Conveying Networks for Advanced Fiber-Reinforced Composites
- Relation Between Drill Bit Temperature and Chip Forms in Drilling of Carbon Black Reinforced Polyamide
- Coupled Flexural-Lateral-Torsional of Shear Deformable Thin-Walled Beams with Asymmetric Cross-Section – Closed Form Exact Solution
- Investigation of Thermoforming Tool Design and Pocket Quality
- Thermo-Hydraulic Performance of Solar Air Heater Duct having Triangular Protrusions as Roughness Geometry
- Investigation of the Effects of Geometric and Load Perturbation to Buckling in Multilayered Torispherical Pressure Vessel Heads
- Design, Modelling and Simulation of a Fuel Cell Power Conditioning System
- APPLICATION OF NUMERICAL MODELLING TO BIOMASS GRATE FURNACES
- A NUMERICAL APPROACH FOR MODELLING THERMAL PROFILES AND EFFECTS OF PROCESS PARAMETERS ON IT IN SUBMERGED ARC WELDING OF AISI 1518 GRADE STEEL
- AN OVERVIEW ON PULSATILE FLOW DYNAMICS
- CURRENT ADVANCES IN THE STANDARDIZATION OF MANAGEMENT SYSTEMS
- A Comparative Study of Different Reaction Models for Turbulent Methane/Hydrogen/Air Combustion
- Performance Analysis and Design of Liquid Based Solar Heating System
- Exergy-based thermodynamic analysis of solar driven Organic Rankine Cycle
- Constructal structures for self-cooling: microvascular wavy and straight channels
- Monitoring and Simulation of Mechanically Ventilated Underground Car Parks
- Determination of fin pitches for maximum performance index of L-footed spiral fin-and-tube heat exchangers
- An Analysis of Current and Future Wind Energy Gain Potential for Central Iowa
- Development and application of a modular- based, multi- level approach for increasing energy efficiency
- Conception and study of a galvanized tubes hybrid PV / T collector for building application
- Improving energy efficiency within manufacturing by recovering waste heat energy
- A closed form solution for ac electo-kinetic-driven flow in a microchannel
- Effects of various parameters on the efficiency of a CO2 heat pump: a statistical approach
- Power optimization of an irreversible regenerative Brayton cycle with isothermal heat addition
- Fundamental assessments and new enabling proposals for heat transfer correlations and flow regime maps for shear driven condensers in the annular/stratified regime
- Energy, Exergy and Sustainability Analysis of Two-stage Vapour Compression Refrigeration System
- Volumetric solar absorber and performance characteristics
- Effect of Process Conditions on Temperature Distribution in the Powder Bed during Laser Sintering of Polyamide-12
- Energy and Exergy Analysis of Cogeration System with Biogas Engines
- Aerodynamic Performance of Small-Scale Horizontal Axis Wind Turbines Under Two Different Extreme Wind Conditions
- Heat Insulation Analysis of an Aluminum Honeycomb Sandwich Structure
- Performance and flow distribution of the plate heat exchanger with supercritical fluid of carbon dioxide
- Characteristics of Magnetohydrodynamic Mixed Convection in a Parallel Motion Two-Sided Lid-Driven Differentially Heated Parallelogrammic Cavity with Various Skew Angles
- Semianalytical methods for heat and fluid flow between two parallel plates
- Mathematical Models and Numerical Solutions of Liquid-Solid and Solid-Liquid Phase Change
- Nanofluid heat transfer and applications
- Thermal conductivity of CNT water based nanofluids: Experimental trends and models overview
- Performance optimization of Brayton heat engine at maximum efficient power using temperature dependent specific heat of working fluid
- Inverted fins for cooling of a non-uniformly heated domain
- Numerical 3-D heat flow simulations on double-pass solar collector with and without porous media
- Numerical simulation and mathematical analysis of flow-wall interaction in the large deformation application to the dynamics of the aneurysms
- Utilisation of Fluids with Low Global Warming Potential in Supercritical Organic Rankine Cycle
- Project, Development and Test of an Artificial Multifunctional Foot
- Social Responsibility as a Key Performance Indicator for the Quality of Educational Processes
- Characterization of the Effects of Insulating Wall Paint on Space Conditioning in a Room
- Biodiesel production and fuel properties from non-edible Champaca (Michelia champaca) seed oil for use in diesel engine
- Yayın Aralığı: 6
- Başlangıç: 2015
- Yayıncı: YILDIZ TEKNİK ÜNİVERSİTESİ
81.3b 80.7b