THERMODYNAMIC ANALYSIS OF BASIC AND REGENERATIVE ORGANIC RANKINE CYCLES USING DRY FLUIDS FROM WASTE HEAT RECOVERY

The organic Rankine cycle (ORC), which generates electric energy using low temperature heat sources, is a promising technology in energy production sector. The ORC, which uses an organic fluid with its lower boiling point and higher vapor pressure than water-steam as a working fluid. The thermal efficiency of an ORC showes the performance of system, depends on system compenents, working fluid and operating conditions. This paper presents an thermodynamics examination of basic ORC and regenerative ORC for waste heat recovery applications using dry organic fluids. R113, R114, R227ea, R245fa and R600a with the boiling points from -16 oC to 48 oC are selected in the analyses. The relationships between the ORC's performance parameters for basic and regenerative technologies and the properties of working fluids are evaluated based on various turbine inlet pressure values. Results show that regenerative ORC has higher thermal efficiency compared with basic ORC. Also, the thermal efficiency increases with the increment of the turbine inlet pressure for both basic ORC and regenerative ORC.

Keywords:

Energy, Exergy, Working Fluid Organic Rankine Cycle, Regenerative Organic Rankine Cycle,

PDF

___

[1] Liu, B. T., Chien, K. H., Wang, C. -C. (2004). Effect of working fluids on organic Rankine cycle for waste heat recovery. Energy, 29(8), 1207-1217.
[2] Chen, Y., Lundqvist, P., Johansson, A., Platell, P.A. (2006). Comparative study of the carbon dioxide transcritical power cycle compared with an organic Rankine cycle with R123 as working fluid in waste heat recovery. Applied Thermal Engineering, 26, 2142–2147.
[3] Kanoglu, M., Bolatturk, A. (2008). Performance and parametric investigation of a binary geothermal power plant by exergy. Renewable Energy, 33, 2366–2374.
[4] Roy, J.P., Mishra, M.K., Misra, A. (2011). Performance analysis of an organic Rankine cycle with superheating under different heat source temperature conditions. Applied Energy, 88, 2995–3004.
[5] Gao, H., Liu, C., He, C., Xu, X., Wu, S., Li, Y. (2012). Performance analysis and working fluid selection of a supercritical organic rankine cycle for low grade waste heat recovery. Energies, 5, 3233–3247.
[6] Dai, Y., Wang, J., Gao, L. (2009). Parametric optimization and comparative study of organic Rankine cycle (ORC) for low grade waste heat recovery. Energy Conversion Management, 50, 576 -582.
[7] Kerme, E. D., Orfi, J. (2015). Exergy-based thermodynamic analysis of solar driven organic Rankine cycle. Journal of Thermal Engineering, 1(1), 192-202.
[8] Wang, D., Ling, X., Peng, H. (2012). Performance analysis of double organic Rankine cycle for discontinuous low temperature waste heat recovery. Applied Thermal Engineering, 48, 63–71.
[9] Wang, Z.Q., Zhou, N.J., Guo, J., Wang, X.Y. (2012). Fluid selection and parametric optimization of organic Rankine cycle using low temperature waste heat. Energy, 40, 107–115.
[10] Kaska, O. (2014). Energy and exergy analysis of an organic Rankine for power generation from waste heat recovery in steel industry. Energy Conversion and Management, 77, 108-117.
[11] Zhu, Q., Sun, Z., Zhou, J. (2015). Performance analysis of organic Rankine cycles using different working fluids. Thermal Science, 19, 179-191.
[12] Koroglu, T., Sogut, O.S. (2017). Advanced exergy analysis of an organic Rankine cycle waste heat recovery system of a marine power plant. Journal of Thermal Engineering, 3(2), 1136-1148.
[13] Yu, H., Feng, X., Wang, Y. (2016). Working fluid selection for organic Rankine cycle (ORC) considering the characteristics of waste heat sources. Industrial & Engineering Chemistry Research, 55, 1309-1321.
[14] Radulovic, J. (2015). Utilization of fluids with low global warming potential in supercritical organic Rankine cycle. Journal of Thermal Engineering, 1(1), 24-30.
[15] Akkaya, A.V. (2017). Performance analyzing of an organic Rankine cycle under different ambient conditions. Journal of Thermal Engineering, 3(5), 1498-1504.
[16] Mago, P. J., Chamra, L. M., Srinivasan, K., Somayaji, C. (2008). An examination of regenerative organic Rankine cycles using dry fluids. Applied Thermal Engineering, 28 (8), 998-1007.
[17] Hajabdollahi, H., Ganjehkaviri, A., Jaafar, M.N.M. (2015). Thermo-economic optimization of RSORC (regenerative solar organic Rankine cycle) considering hourly analysis. Energy, 87, 369–380.
[18] Wang, M., Wang, J., Zhao, Y., Dai, Y. (2013). Thermodynamic analysis and optimization of a solar-driven regenerative organic Rankine cycle (ORC) based on flat-plate solar collectors. Applied Thermal Engineering, 50, 816–825.
[19] Darvish, K., Ehyaei, M.A., Atabi, F., Rosen, M.A. (2015). Selection of optimum working fluid for organic Rankine sysles by exergy and exergy-economic analyses. Sustainability, 7, 15362–15383.
[20] Roy, J.P., Misra, A. (2012). Parametric optimization and performance analysis of a regenerative Organic Rankine Cycle using R-123 for waste heat recovery. Energy, 39, 227–235.
[21] Imran, M., Park, B., Kim, H., Lee, D., Usman, M., Heo, M. (2014). Thermo-economic optimization of regenerative organic Rankine cycle for waste heat recovery applications. Energy Conversion and Management, 87, 107-118.
[22] Cengel, Y.A., Boles M.A.(2011). Thermodynamics: An Engineering Approach, 7th ed., New York, USA: McGraw-Hill Inc.
[23] http://www.coolprop.org/fluid_properties/PurePseudoPur ehtml#thermodynamic-properties-of-fluid, ( accessed: 02.03.2017)

Başlangıç: 2015
Yayıncı: YILDIZ TEKNİK ÜNİVERSİTESİ

Arşiv