Ambati SANDEEP, K. ARCHANA, Sivakumar ELLAPPAN, Dandu MALLESHAM

ADVANCEMENT OF SOLAR SELECTIVE DLC COATING USING CAPVD FOR SOLAR THERMAL APPLICATIONS

Metal nitride multilayer films display a unique combination of exceptional properties with respect to optical absorption, thermal emission, corrosion resistance, adhesion between coating and surface and high temperature withstand. Most considerable aspects of nitride coatings were economical, environmentally friendly and easy to develop. Similar to nitride thin films, to achieve a considerable absorption (α) -0.92 and low emission (Є) -0.08 along with chemical and radiation stable solar selective coatings, Diamond Like Carbon (DLC) thin films exhibit the desirable properties for Concentrated Solar thermal Power(CSP)applications. The main advantages of DLC films were high hardness, chemical and radiation stability and good control over the optical properties. To achieve above-mentioned properties, optimization of each layer of the DLC coating has needed. The main aim of this research is optimization of Cr-base layer using Cr-Target current 175A to get 125 nm thicknesses, optimise the AlSiN absorber layer by controlling the AlSi- target current 175A to maintain 35nm thickness. The sequence of the DLC coating layers was selected based on their relative thickness, which was optimize to get good solar selectivity (α/Є). Individual layers of the DLC solar coatings have unique properties to get overall required high absorbance and low emission along with chemical and radiation stability. These solar selective multi-layers (Cr/DLC/AlSiN) have deposited by using available Cathodic targets (Cr , AlSi & Ti) in Cathodic Arc Physical Vapor Deposition (CAPVD) and optimized parameters were mainly depend on the target currents to control over the thickness of the each layer, base pressure 1*10-5 mbar and deposition temperature 400°C. The DLC multilayer solar selective coatings were characterized using Ultraviolet Visible Near infrared (UV- Vis- NIR) spectrophotometer, Scanning Electronic Microscopy (SEM), Transmission Electron Microscopy (TEM) and Raman spectroscopy etc. Scratch test and corrosion tests have conducted for these absorber coatings testing.

Keywords:

DLC Multilayer Absorber Coating, Solar-Irradiation, Radiation Stable, High Hardness,

PDF

___

[1] Granqvist, C. G. Solar energy materials, Applied Physics A, Vol.52, 1991, pp : 83-93.
[2] Harish C. Bharshilia, Prashant kumar, Rajam, K. S., Biswas,A.Structure and optical properties of Ag- Al2o3nanocermet solar selective coatings prepared using unbalanced magnetron sputtering,Soler Energy Matererials and Soler Cells, Vol.95, 2011, pp: 1707-1715.
[3] Harish C. Barshilia, Selvakuma,N., and Rajam,K.S., Sridhara Rao,D.V., Muraleedharan,K. and Biswas,A. TiAlN/TiAloN/Si3N4TiAlN/TiAloN/Si3N4 tandem absorber for high temperature solar selective applications, Applied Physics Letters, Vol.89, 2006, pp: 191909.
[4] Hutchins, M.G. Selective thin film coatings for the conversion of solar radiation, Surface Technology, Vol.20, 1983, pp: 301-320.
[5] Yin, Y.,Pan, Y., Hang, L. X., Mckenzie, D. R., Bilek,M. M. M., Thin Solid Films, Vol.517, 2009, pp: 1601- 1606.
[6] Kennedy, C. E.Review of Mid- to High-Temperature Solar Selective absorber
[7] Materials, NREL/TP-520-31267, July 2002.
[8] Godinho,V., Philippon,D., Rojas,T. C., Novikova,N. N., Yakovlev, V.A., Vinogradov, E. A., Fernandez, A.,Characterization of Ti1-xAlxN coatings eith selective IR reflectivity, Solar Energy, Vol.84, 2010, pp: 1397- 1401.
[9] Qui-Chu Zhang, Recent progress in high-temperature solar selective coatings, Soler Energy Materials and Soler Cells,Vol.62, 2000, pp: 63-74.
[10] Smith, G. B., A. Ben-David, Swift,P.D. Energy-Efficient Optical Coating for Flat Glass, Renewable Energy Vol.22, 2001, pp: 79-84.
[11] Ramezanizadeh, M., et al., “Experimental and Numerical Analysis of a Nano-fluidicThermosyphon HeatExchanger,” Engineering Applications of Computational Fluid Mechanics 13(1): 40-47 2019.
[12] Ghalandari, M., et al., “Numerical Simulat ion of Nano-fluid Flow inside Root Canal,” EngineeringApplications of Computational Fluid Mechanics 13 (1): 254-264 2019. 23-4.
[13] Hussein, A.K. Applications of nanotechnology in renewable energies-A comprehensive overview and understanding , Renewable and Sustainable Energy Reviews , Vol.42 , 2015, pp : 460-476.
[14] Hussein, A.K. , Walunj, A. and Kolsi , L. Applications of nanotechnology to enhance the performance of the direct absorption solar collectors , Journal of Thermal Engineering , Vol. 2 , No. 1, 2016, pp : 529- 540.
[15] Hussein, A.K. Applications of nanotechnology to improve the performance of solar collectors – Recent advances and overview , Renewable and Sustainable Energy Reviews , Vol. 62 , 2016, pp : 767-792.
[16] Farooq,M., Hutchins, M. G. Optical properties of higher and lower refractive index composites in solar selective coatings, Soler Energy Materials and Soler Cells, Vol. 71, 2002, pp: 73-83.
[17] Shuxi Zhao, Ewa Wackelgard.Optimization of solar absorbing three-layer coatings, SolerEnergy Materials and Soler Cells, Vol. 90, 2006, pp: 243-261.
[18] Harish, Barshilia,C., Selvakumar, n., and.Rajam,K.S.Structure and optical properties of pulsed sputter deposited CrxOy/Cr/Cr2O3crxoy/Cr/Cr2o3 solar selective coatings, Journal of AppliedPhysics, Vol.103, 2008, pp: 023507.
[19] Kiyoshi Chiba and Shota Kaminishi, Fabrication and Optical Properties of Low-Emissivity Coatings of AlSiN and AgCuNd-Alloy Mutilayer Films on Glass, Japanees Journal of Applied Physics, Vol.47, 2008, pp: 1.
[20] Qui Zhang , Direct current magnetron sputtered W-AIN cermet solar absorber films, Journal of Vacuum Science and Technology A, Vol. 151997, pp: 6.
[21] Miao Du, Lei Hao, Jing Mi, Fang Lv, Xiaopeng Liu, Lijun Jiang, Shumao Wang, Optimization design of Tio.5Alo.5N/Tio.25Alo.75N/Aln coating used for solar selective applications, SolerEnergy Materials and Soler Cells, Vol.95, 2011, pp: 1193-1196.
[22] Klyui,N. I., Litovchenko,V. G., Rozhin, A. G., Dikusha,V. N., Kittler,M., and Seifert,W.High efficient solar cells and modules based on diamond like carbon film-multicrystalline Si structures, SolerEnergy Materials and Soler Cells, Vol.72, 2002, pp: 597-603.
[23] Tinchev, S. S., Nikolova, P. I., Dyulgerska, J. T., Danev,G., and Tz. Babeva, a-C:H absorber layer for solar cells matched to solar spectrum, Soler Energy Materials and Soler Cells, Vol.86, 2005, pp: 421- 426.
[24] Gampp,R., Oelhafen, P., Gantenbein,P., Brunold, S., and Frei,U. SolerEnergy Materials and Soler Cells Vol.54, 1998, pp: 369-377.
[25] Tinchev,S. S., Nikolova, P. I. and Dyulgerska,Y. T.Thermal solar absorber made of diamond-like carbon thin films, Journal of Physics, Vol.223, 2010, pp: 012017.
[26] Lespade,P. Al-Jishi,R. and Dresselhaus,M. S.Model for Rman scattering from incompletely graphitized carbons, Carbon, Vol.20, 1982, pp: 427.
[27] Vidano, R. And Fishbach,D. B. New lines in the Raman Spectra of Carbons and Graphite, Journal of American Ceramic Society, Vol.61, 1978, pp: 13.
[28] Chain,E. E., Carver,C. E. and Seraphin,B. O. Highly reflecting molybdenum thin films having significant solar absorptance, Thin Solid Films, Vol.72, 1980, pp: 59.
[29] Gogna,P. K. and Chopra, K. L. Selective black nickel coatings on zinc surfaces by chemical conversion, Soler Energy, Vol.23, 1979, pp: 405.
[30] McDonald,G. E. Spectral reflectance properties of black chrome for use as a solar selective coating, Soler Energy, Vol.17, 1975, pp: 119.
[31] Driver, P. M., Jones,R. W., Riddeford,C. L. and Simpson, R. J.A new chrome black selective absorbing surface, Soler Energy, Vol.19, 1977, pp: 301.
[32] Williams, W. S., Lappin,T. A. and Duffie,J. A. Selective radiation properties of particular coatings, Journal Engineering of Power, Vol.85, 1963, pp: 213.
[33] Electric Power Research Institute, 1997, Renewable Energy Technology Characterizations, Tropical Report No. 109496, Palo Alto CA
[34] Blickensderfer, R., Deardorff,D. K. and L0 Lincoln, R. Spectral reflectance of TiN and ZrNx films as selective solar absorbers, Soler Energy, Vol.19, 1977, pp: 429.
[35] Choudhury,C. and Sehgal, H. K.Black cobalt selective coatings by spray pyrolysis for photothermal conversion of solar energy, Soler Energy, Vol.28, 1982, pp: 25.
[36] Fan,J. C. C. and Zavracky,P. M. Selective black absorbers using MgO/Au cermet films, Applied Physics Letters, Vol.29, 1976, pp: 478.
[37] Peterson, R. E. And Ramsey,J. W. Thin film coatings in solar thermal power systems, Journal of Vacuum Science and Technology, Vol.12, 1975, pp: 174.
[38] Fan, J. C. C. and Bachner,F. J. Transparent heat mirrors for solar energy applications, Applied Optics, Vol.15, 1976, pp: 1012.
[39] Schmidt,R. N., and Park,K. C. High temperature space-stable selective solar absorber coatings, Applied Optics, Vol.4, 1965, pp: 91.

Başlangıç: 2015
Yayıncı: YILDIZ TEKNİK ÜNİVERSİTESİ

Arşiv