EXPERIMENTAL INVESTIGATION OF NANO COMPRESSOR OIL EFFECT ON THE COOLING PERFORMANCE OF A VAPOR-COMPRESSION REFRIGERATION SYSTEM

In this study, cooling performance of a refrigeration system under the effects of nanoparticle (TiO2) addition to the compressor oil (poly alkaline glycol (PAG)) was experimentally investigated. Thermodynamics analysis of the vapor-compression refrigeration system with various nanoparticle volume fractions of TiO2 (between 0.5%, and 1%) added to the compressor oil was performed. R-134a was used as the refrigerant. Two-step method was used to prepare the nano-lubricant for different solid particle volume fractions. It was observed that COP of the refrigeration system enhances with the addition of nanoparticles and it is an increasing function of nanoparticle volume fraction.

___

  • [1] Godson, L., Raja, B., Mohan Lal, D., Wongwises, S. (2010). Enhancement of heat transfer using nanofluids: An overview. Renew. Sust. Energ. Rev., 14 (2), 629-641.
  • [2] Selimefendigil, F., Oztop, H.F. (2017). Jet impingement cooling and optimization study for a partly curved isothermal surface with CuO-water nanofluid. International Communications in Heat and Mass Transfer, 89,211-218.
  • [3] Selimefendigil, F., Oztop, H.F. (2019). Corrugated conductive partition effects on MHD free convection of CNT-water nanofluid in a cavity. International Journal of Heat and Mass Transfer, 129, 265-277.
  • [4] Jumpholkul, C., Mahian, O., Kasaeian, A., Dalkilic, A.S., Wongwises, S. (2017). An experimental study to determine the maximum efficiency index in turbulent flow of SiO2/water nanofluids. International Journal of Heat and Mass Transfer, 112, 1113-1121.
  • [5] Nitiapiruk, P., Mahian, O., Dalkilic, A.S., Wongwises, S. (2013). Performance characteristics of a microchannel heat sink using TiO2/water nanofluid and different thermophysical models. International Communications in Heat and Mass Transfer, 47, 98-104.
  • [6] Selimefendigil, F., Oztop, H.F. (2018). Mixed convection of nanofluids in a three dimensional cavity with two adiabatic inner rotating cylinders. International Journal of Heat and Mass Transfer, 117, 331-343.
  • [7] Cheng, L., Liu, L. (2013). Boiling and two-phase flow phenomena of refrigerant-based nanofluids: fundamentals, applications and challenges. Int. J. Refrigeration, 36 (2), 421-446.
  • [8] Bobbo, S., Fedele, L., Fabrizio, M., Barison, S., Battiston, S., Pagura, C. (2010). Influence of nanoparticles dispersion in POE oil on lubricity and R134a solubility. Int. J. Refrigeration, 33 (6), 1180-1186.
  • [9] Krishna Sabareesh, R., Gobinath, N., Sajith, V., Das, S., Sobhan, C.B., 2012 Application of TiO2 nanoparticles as a lubricant-additive for vapor compression refrigeration systems-An experimental investigation. Int. J. Refrigeration 35 (7), 1989-1996.
  • [10] Ozu, M., Itami, T., 1981 Efficiency analysis of power consumption in small hermetic refrigerant rotary compressors. Int. J. Refrigeration 4 (5), 265-270.
  • [11] Wang, R., Wu, Q., Wu, Y. (2010). Use of nanoparticles to make mineral oil lubricants feasible for use in a residential air conditioner employing hydro-fluorocarbons refrigerants. Energy Build., 42 (17), 2111-2117.
  • [12] Dalkilic, A. S. and Wongwises, S. (2010). A performance comparison of vapour-compression refrigeration system using various alternative refrigerants. International Communications in Heat and Mass Transfer, 37, 1340–1349.
  • [13] Padmanabhan, VMV and Palanisamy S. (2011). The use of TiO2 nanoparticles to reduce refrigerator irreversibility, Energy Conversion and Management, 59, 122-132.
  • [14] Bi,S., Guo, K., Liu, Z., Wu, J. (2011). Performance of a domestic refrigerator using TiO2-R600a nano-refrigerant as working fluid, Energy Conversion and Management, 52, 733-737.
  • [15] Aprea, C., Renno C. (2011). An experimental investigation of the global environmental impact of the R22 retrofit with R422D. Energy, 36, 1161-70.