R. LONI, A. KASAEIAN, E. Askari ASLI ARDEH, B. GHOBADIAN, G. NAJAFI

THERMAL EVALUATION OF CAVITY RECEIVER USING WATER/PG AS THE SOLAR WORKING FLUID

In this study, a parabolic dish concentrator with a cavity receiver was investigated. Water/ Propylene Glycol (PG) was used as the solar heat transfer fluid. Thermal numerical modelling was developed for prediction of the cavity receiver performance. The water/PG in different volume fractions (VF) of the PG was examined consist of 0%, 25%, 50%, and 55%. The working fluid inlet temperature is investigated in ranging 0oC to 100oC. The results revealed that the thermal efficiency and the cavity heat gain decreased by increasing the GP volume fraction. The pressure drop and pumping work demand decreased by increasing the working fluid inlet temperature as well as decreasing the PG volume fraction in the pure water. Consequently, the pure water had the lowest amount of the pressure drop among the investigated working fluids. The cavity surface temperature increased by increasing the working fluid inlet temperature as well as increasing the PG volume fraction in the pure water. Consequently, the application of the higher amount of PG is recommended for the Bryton cycle.

Keywords:

Numerical Modelling, Cavity Receiver, Energy Analysis,

PDF

___

[1] Lewis, N. S. (2007). Toward cost-effective solar energy use. science, 315(5813), 798-801.
[2] Thirugnanasambandam, M., Iniyan, S., & Goic, R. (2010). A review of solar thermal technologies. Renewable and sustainable energy reviews, 14(1), 312-322.
[3] Loni, R. A., Asli-Ardeh, E. A., Ghobadian, B., Kasaeian, A. B., & Gorjian, S. (2017). Thermodynamic analysis of a solar dish receiver using different nanofluids. Energy, 133, 749-760.
[4] Stefanovic, V. P., Pavlovic, S. R., Bellos, E., & Tzivanidis, C. (2018). A detailed parametric analysis of a solar dish collector. Sustainable Energy Technologies and Assessments, 25, 99-110.
[5] Pavlovic, S., Daabo, A. M., Bellos, E., Stefanovic, V., Mahmoud, S., & Al-Dadah, R. K. (2017). Experimental and numerical investigation on the optical and thermal performance of solar parabolic dish and corrugated spiral cavity receiver. Journal of cleaner production, 150, 75-92.
[6] Loni, R., Kasaeian, A. B., Asli-Ardeh, E. A., & Ghobadian, B. (2016). Optimizing the efficiency of a solar receiver with tubular cylindrical cavity for a solar-powered organic Rankine cycle. Energy, 112, 1259-1272.
[8] Loni, R., Kasaeian, A., Mahian, O., Sahin, A. Z., & Wongwises, S. (2017). Exergy analysis of a solar organic Rankine cycle with square prismatic cavity receiver. International Journal of Exergy, 22(2), 103-124.
[9] M. Günther, R. Shahbazfar, T. Fend, M. Hamdan, Solar Dish Technology.
[10] Loni, R., Asli-Ardeh, E. A., Ghobadian, B., Kasaeian, A. B., & Gorjian, S. (2017). Numerical and experimental investigation of wind effect on a hemispherical cavity receiver. Applied Thermal Engineering, 126, 179-193.
[11] Pavlovic, S., Bellos, E., & Loni, R. (2018). Exergetic investigation of a solar dish collector with smooth and corrugated spiral absorber operating with various nanofluids. Journal of cleaner production, 174, 1147-1160.
[12] Loni, R., Kasaeian, A. B., Mahian, O., & Sahin, A. Z. (2016). Thermodynamic analysis of an organic rankine cycle using a tubular solar cavity receiver. Energy conversion and management, 127, 494-503.
[13] Loni, R., Kasaeian, A., Shahverdi, K., Asli-Ardeh, E. A., Ghobadian, B., & Ahmadi, M. H. (2017). ANN model to predict the performance of parabolic dish collector with tubular cavity receiver. Mechanics & Industry, 18(4), 408.
[14] Li, H., Huang, W., Huang, F., Hu, P., & Chen, Z. (2013). Optical analysis and optimization of parabolic dish solar concentrator with a cavity receiver. Solar energy, 92, 288-297.
[15] Jilte, R. D., Kedare, S. B., & Nayak, J. K. (2014). Investigation on convective heat losses from solar cavities under wind conditions. Energy Procedia, 57, 437-446.
[16] Prakash, M., Kedare, S. B., & Nayak, J. K. (2009). Investigations on heat losses from a solar cavity receiver. Solar Energy, 83(2), 157-170.
[17] Reddy, K. S., Vikram, T. S., & Veershetty, G. (2015). Combined heat loss analysis of solar parabolic dish–modified cavity receiver for superheated steam generation. Solar Energy, 121, 78-93.
[18] Wu, S. Y., Xiao, L., Cao, Y., & Li, Y. R. (2010). Convection heat loss from cavity receiver in parabolic dish solar thermal power system: A review. Solar energy, 84(8), 1342-1355.
[19] Przenzak, E., Szubel, M., & Filipowicz, M. (2016). The numerical model of the high temperature receiver for concentrated solar radiation. Energy Conversion and Management, 125, 97-106.
[20] Kaushika, N. D., & Reddy, K. S. (2000). Performance of a low cost solar paraboloidal dish steam generating system. Energy conversion and management, 41(7), 713-726.
[21] Mao, Q., Shuai, Y., & Yuan, Y. (2014). Study on radiation flux of the receiver with a parabolic solar concentrator system. Energy Conversion and Management, 84, 1-6.
[22] Fang, J. B., Wei, J. J., Dong, X. W., & Wang, Y. S. (2011). Thermal performance simulation of a solar cavity receiver under windy conditions. Solar Energy, 85(1), 126-138.
[23] Reddy, K. S., & Kumar, N. S. (2009). An improved model for natural convection heat loss from modified cavity receiver of solar dish concentrator. Solar Energy, 83(10), 1884-1892.
[24] Chang, H., Duan, C., Wen, K., Liu, Y., Xiang, C., Wan, Z., ... & Shu, S. (2015). Modeling study on the thermal performance of a modified cavity receiver with glass window and secondary reflector. Energy Conversion and Management, 106, 1362-1369.
[25] Pavlovic, S., Bellos, E., Le Roux, W. G., Stefanovic, V., & Tzivanidis, C. (2017). Experimental investigation and parametric analysis of a solar thermal dish collector with spiral absorber. Applied Thermal Engineering, 121, 126-135.
[26] Le Roux, W. G., Bello-Ochende, T., & Meyer, J. P. (2014). The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle. Energy Conversion and Management, 84, 457-470.
[27] Schetz, J. A., & Fuhs, A. E. (Eds.). (1999). Fundamentals of fluid mechanics. John Wiley & Sons.
[28] C.A. Meyer, ASME steam tables: thermodynamic and transport properties of steam: comprising tables and charts for steam and water, calculated using the 1967 IFC formulation for industrial use in conformity with the 1963 international skeleton tables, as adopted by the Sixth International Conference on the Properties of Steam, American Society of Mechanical Engineers, 1983.

Başlangıç: 2015
Yayıncı: YILDIZ TEKNİK ÜNİVERSİTESİ

Arşiv