NATURAL CONVECTION OF A NANOFLUID IN A CONICAL CONTAINER

Natural convection is simulated in a truncated cone filled with Cu-water nanofluid, pure water is considered as the base fluid with Pr=6.2 and (Cu) is the nanoparticle . Inclined and top walls have constant temperature where the heat source is located on the bottom wall of the conical container which is thermally insulated. A finite volume approach is used to solve the governing equations using the SIMPLE algorithm for different parameters such as Rayleigh number (103, 104, 105 and 106), inclination angle of inclined walls of the enclosure and heat source length (0.3L, 0.7L and L). The results showed an enhancement in cooling system by using a nanofluid, when conduction regime is assisted. The inclination angle of inclined sidewall and heat source length affect the heat transfer rate and the maximum temperature.

Keywords:

Heat Source, Truncated Cone Nanofluid, Natural Convection,

PDF

___

[1] Khanafer, K., Vafai, K., & Lightstone, M. (2003). Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids. International Journal of Heat and Mass Transfer, 46(19), 3639–3653.
[2] Jou, R. Y., & Tzeng, S. C. (2006). Numerical research of nature convective heat transfer enhancement filled with nanofluids in rectangular enclosures. International Communications in Heat and Mass Transfer, 33(6), 727–736.
[3] Oztop, H. F., & Abu-Nada, E. (2008). Numerical study of natural convection in partially heated rectangular enclosures filled with nanofluids. International Journal of Heat and Fluid Flow, 29(5), 1326–1336.
[4] Aminossadati, S. M., & Ghasemi, B. (2009). Natural convection cooling of a localised heat source at the bottom of a nanofluid-filled enclosure. European Journal of Mechanics, B/Fluids, 28(5), 630–640.
[5] Ben-Mansour, R., & Habib, M. A. (2013). Use of nanofluids for improved natural cooling of discretely heated cavities. Advances in Mechanical Engineering, 2013.
[6] Sun, Q., & Pop, I. (2011). Free convection in a triangle cavity filled with a porous medium saturated with nanofluids with flush mounted heater on the wall. International Journal of Thermal Sciences, 50(11), 2141–2153. [7] Garoosi, F., Bagheri, G., & Talebi, F. (2013). Numerical simulation of natural convection of nanofluids in a square cavity with several pairs of heaters and coolers (HACs) inside. International Journal of Heat and Mass Transfer, 67, 362–376.
[8] Heris, S. Z., Pour, M. B., Mahian, O., & Wongwises, S. (2014). A comparative experimental study on the natural convection heat transfer of different metal oxide nanopowders suspended in turbine oil inside an inclined cavity. International Journal of Heat and Mass Transfer, 73, 231–238.
[9] Abu-Nada, E., Oztop, H. F., & Pop, I. (2012). Buoyancy induced flow in a nanofluid filled enclosure partially exposed to forced convection. Superlattices and Microstructures, 51(3), 381–395.
[10] Lazarus, G. (2015). Nanofluid heat transfer and applications. Journal of Thermal Engineering, 1(2), 113.
[11] Estellé, P., Halelfadl, S., & Maré, T. (2015). Thermal Conductivity of Cnt Water Based Nanofluids: Experimental Trends and Models Overview. Journal of Thermal Enginnering, 1(2), 381–390.
[12] Öztop, H., Selimefendigil F., Abu-Nada E., Al-Salem K., (2016) Recent Developments of Computational Methods on Natural Convection in Curvilinear Shaped Enclosures. Journal of Thermal Engineering, 2 (2), 693 – 698.
[13] Patankar, S. (1980). Numerical heat transfer and fluid flow. Series in coputational methods in mechanics and thermal sciences.

Başlangıç: 2015
Yayıncı: YILDIZ TEKNİK ÜNİVERSİTESİ

Arşiv