___

• [1] Zare V, Mahmoudi SMS Yari M. An exergoeconomic investigation of waste heat recovery from the Gas Turbine-Modular Helium Reactor (GT-MHR) employing an ammonia–water power/cooling cycle. Energy. 2013;61: 397–409.
• [2] Singh R, Kearney MP and Manzie C. Extremum-seeking control of a supercritical carbon-dioxide closed Brayton cycle in a direct-heated solar thermal power plant. Energy . 2013;60: 380–387.
• [3] Singh R, Miller SA, Rowlands AS and Jacobs -PA. Dynamic characteristics of a direct-heated supercritical carbon-dioxide Brayton cycle in a solar thermal power plant. Energy . 2013;50: 194–204.
• [4] Abd El-Maksoud RM. Binary Brayton cycle with two isothermal processes. Energy Conversion and Management. 2013;73:303–308.
• [5] Singh R, Rowlands AS and Miller SA. Effects of relative volume-ratios on dynamic performance of a direct-heated supercritical carbon-dioxide closed Brayton cycle in a solar-thermal power plant. Energy . 2013;55:1025–1032.
• [6] Ferraro V, Imineo F and Marinelli V. An improved model to evaluate thermodynamic solar plants with cylindrical parabolic collectors and air turbine engines in open Joule–Brayton cycle. Energy. 2013;53: 323–331.
• [7] Haseli Y. Optimization of a regenerative Brayton cycle by maximization of a newly defined second law efficiency. Energy Conversion and Management. 2013;68: 133–140.
• [8] Plaznik U, Tušek J, Kitanovski A and Poredoš A. Numerical and experimental analyses of different magnetic thermodynamic cycles with an active magnetic regenerator. Applied Thermal Engineering. 2013;59(1-2): 52–59.
• [9] Malinowski L and Lewandowska M. Analytical model-based energy and exergy analysis of a gas microturbine at part-load operation. Applied Thermal Engineering. 2013;57(1-2): 125–132.
• [10] Sim K, Koo B, Kim CH and Kim TH. Development and performance measurement of micro-power pack using micro-gas turbine driven automotive alternators. Applied Energy. 2013;102: 309–319.
• [11] Rao AD and Francuz DJ. An evaluation of advanced combined cycles. Applied Energy. 2013;102: 1178–1186.
• [12] Ablay G. A modeling and control approach to advanced nuclear power plants with gas turbines. Energy Conversion and Management. 2013;76: 899–909.
• [13] Mahto D and Pal S. Thermodynamics and thermo-economic analysis of simple combined cycle with inlet fogging. Applied Thermal Engineering. 2013;51(1-2): 413–424.
• [14] Fernández-Villacé V and Paniagua G. On the exergetic effectiveness of combined-cycle engines for high speed propulsion. Energy. 2013;51: 382–394.
• [15] Pantaleo AM, Camporeale S and Shah S. Thermo-economic assessment of externally fired micro-gas turbine fired by natural gas and biomass: Applications in Italy. Energy Conversion and Management. 2013;75: 202–213.
• [16] Singh OK and Kaushik SC. Thermoeconomic evaluation and optimization of a Brayton–Rankine–Kalina combined triple power cycle. Energy Conversion and Management. 2013;71: 32–42.
• [17] Goodarzi M, Kiasat M and Khalilidehkordi E. Performance analysis of a modified regenerative Brayton and inverse Brayton cycle. Energy. 2014;72: 35–43.
• [18] Al-Sulaiman FA and K Atif M. Performance comparison of different supercritical carbon dioxide Brayton cycles integrated with a solar power tower. Energy. 2014;72: 35–43.
• [19] Le Roux WG, Ochende TB and Meyer JP. The efficiency of an open-cavity tubular solar receiver for a small-scale solar thermal Brayton cycle. Energy Conversion and Management. 2014;84: 457–470.
• [20] Dutta P, Kumar P, Ng KC, Murthy SS and Srinivasan K. Organic Brayton Cycles with solid sorption thermal compression for low grade heat utilization. Applied Thermal Engineering. 2014;62(1): 171–175.
• [21] Ebrahimi R. Thermodynamic modeling of performance of a Miller cycle with engine speed and variable specific heat ratio of working fluid. Computers and Mathematics with Applications 2011;62: 2169–76.
• [22] Ebrahimi R. Performance analysis of an irreversible Miller cycle with considerations of relative air–fuel ratio and stroke length. Applied Math Modeling 2012;36: 4073–9.
• [23] Gonca G. Thermodynamic analysis and performance maps for the irreversible Dual–Atkinson cycle engine (DACE) with considerations of temperature-dependent specific heats, heat transfer and friction losses. Energy Convers Manage 2016;111:205–216.
• [24] Gonca G, Sahin B. The influences of the engine design and operating parameters on the performance of a turbocharged and steam injected diesel engine running with the Miller cycle. Appl Math Modeling 2016;40(5-6):3764-3782.
• [25] Ferguson CR. Internal combustion engines – applied thermosciences. New York: John Wiley & Sons Inc.; 1986.
• [26] EES Academic Professional Edition, (2014), V.9.701-3D, USA, F-Chart Software.
• [27] Ge Y, Chen L, Sun F, Wu C. Finite-Time Thermodynamic Modelling and Analysis of an Irreversible Otto-Cycle. Appl Energy 2008;85: 618-24.