Mustafa EMAD, Sattar ALJABAIR, Ahmed Abdulnabi IMRAN

Heat transfer enhancement of electronic devices by using flexible printed circuit boards

In this paper, heat transfer in electronic equipment was studied numerically and experimentally, by investing in the flexible printed circuit board and changing the board’s orientation, which is the substrate of the electronic equipment from a vertical to a horizontal position. ANSYS Fluent software has been used to solve the continuity, momentum, and energy equations with the three-dimensional, unsteady, laminar and incompressible flow. In this study, the oscillatory motion equation was used as a boundary condition to represent the motion of the flexible board. In the experimental aspect of this study, a simulation of an ASUS motherboard (X399-A) with dimensions (30 x 25) cm and a Core i9 CPU with a fully working power of 130W was used to study the enhancement of heat transfer in the electronic devices by test rig specially made for this study. The results show that the flexible board’s enhancement in the heat transfer was (7%) vertically and (7.6%) horizontally compared with the rigid board for the same working conditions. The horizontal position is better than the vertical of the two types of rigid and flexible board, with improved heat transfer rates of (2.7%) and (3%); correlation Equations of the Nusselt number from experimental results are presented.

Keywords:

Flexible Printed Circuit Board Substrate Board Orientation, Electronics System Cooling, Enhancement Heat Transfer,

PDF

___

REFERENCES
[1] Ghasemi B, Aminossadati S. Numerical simulation of mixed convection in a rectangular enclosure with different numbers and arrangements of discrete heat sources. Arab J Sci Eng 2008;33:189207.
[2] Anandakrishnan M, Balaji C. CFD Simulations of thermal and flow fields inside a desktop personal computer cabin with multi-core processors. Eng Appl Comput Fluid Mech 2009;2:277288. [CrossRef]
[3] Wits WW, Vaneker THJ, Mannak JH, Legtenberg R. Novel cooling strategy for electronic packages: Directly injected cooling. CIRP J Manuf Sci Technol 2009;1:142147. [CrossRef]
[4] Ilker Tari, Fidan Seza Yalcin. CFD analyses of a notebook computer thermal management system and a proposed passive cooling alternative. IEEE Trans Compon Packag Technol 2010;33:443452.
[5] Hotta TK, Venkateshan SP. Natural and mixed convection heat transfer cooling of discrete heat sources placed near the bottom on a PCB. World Acad Sci, Eng Technol, Int J Mech, Aerospace, Industrial, Mech Manuf Eng 2012;6:14461453.
[6] Leong WC, Abdullah MZ, Khor CY, Ong EES. Study on the Fluid–Structure interaction of flexible printed circuit board electronics in the flow environment. IEEE Trans Compon Packag Manuf Technol 2012;2:13351345. [CrossRef]
[7] Rout SK, Mishra DP, Thatoi DN, Acharya AK. Numerical analysis of mixed convection through an internally finned tube. Adv Mech Eng 2012;4:918342.
[8] Nakla ME. Forced convection heat transfer in two-dimensional ribbed channels with varying heat flux profiles using ANSYS’ software and modeling. Arab J Sci Eng 2014;39:21572164.
[9] Hussein AK, Rout SK, Fathinia F, Chand R, Mohammed HA. Natural convection in a triangular top wall enclosure with a solid strip. J Eng Sci Technol 2015;10:13261341.
[10] Navas RKB, Vignan BVC, Durganadh M, Krishna CR. Analysis and optimization of central processing unit process parameters. IOP Conf Ser Mater Sci Eng 2017;197:012084. [CrossRef]
[11] Choudhary P, Pankaj SK, Tomar M, Thakur HC. Unsteady analysis of heated inclined fin-plate placed inside square enclosure. 2nd Int Conf Convergence Technol (I2CT) 2017. Available at: https://ieeexplore.ieee.org/document/8226220/authors#authors. Accessed Nov 16, 2023.
[12] Lim CH, Abdullah MZ, Azid IA, Aziz MSA. Experimental and numerical investigation of flow and thermal effects on flexible printed circuit board. Microelectron Reliab 2017;72:517.‏ [CrossRef]
[13] Yıldız S. Investigation of natural convection heat transfer at constant heat flux along a vertical and inclined plate. J Therm Eng 2018;4:24312444.‏ [CrossRef]
[14] Nodooshan AA. Heat transfer and friction characteristics of an array of perforated fins under laminar forced convection. J Therm Eng 2019;5:115122.‏ [CrossRef]
[15] Mathew VK, Hotta TK. Experiment and numerical investigation on optimal distribution of discrete ICs for different orientation of substrate board. Int J Ambient Energy 2022;43:16071614. [CrossRef]
[16] Chen Y. Analysis and research on Thermal-Force coupling performance of a vehicle controller PCB board.2020 3rd International Conference on Electron Device and Mechanical Engineering (ICEDME). 2020‏.‏ Available at: https://ieeexplore.ieee.org/document/9122139/authors#authors. Accessed Nov 16, 2023
[17] Aun SHA, Ghadhban SA, Jehhef KA. Experimental and numerical investigation of convection heat transfer in an enclosure with a vertical heated block and baffles. J Therm Eng 2021;7:367386. [CrossRef]
[18] Durgam S. Forced convection from IC chips on printed circuit boards generating high heat fluxes. J Inst Eng (India): Ser C 2021;102:933940. [CrossRef]
[19] Mehta K, Mehta N, Patel V. Experimental investigation of the thermal performance of closed loop flat plate oscillating heat pipe. Exp Heat Transf 2021;34:85103. [CrossRef]
[20] Gupta SK, Kukreja N. Optimization of cooling fan speed for heat transfer enhancement of electronic chip using CFD. IOP Conf Ser: Mater Sci Eng 2021;1116:012107. [CrossRef]
[21] Nadezhda Evstatieva, Boris Evstatiev. Modelling the temperature conditions of a printed circuit board. 12th Int Symp Adv Topics Elect Eng (ATEE) 2021. Available at: https://www.masader.om/eds/detail?db=edseee&an=edseee.9425281&isbn=9781665418775. Accessed Nov 16, 2023.
[22] Bilawane RR, Mandavgade NK, Kalbande VN, Patle LJ, Kanojiya MT, Khorgade RD. Experimental investigation of natural convection heat transfer coefficient for roughed inclined plate. Mater Today: Proc 2021;46:79267931. [CrossRef]
[23] Kadum M, Imran AA, Aljabair S. Heat transfer in electronic systems printed circuit board: A review. Eng Technol J 2022;40:99108. [CrossRef]
[24] Dash B, Nanda J, Rout SK. The role of microchannel geometry selection on heat transfer enhancement in heat sinks: A review. Heat Transfer 2022;51:14061424. [CrossRef] [25] CFD Experts. ANSYS Fluent Theory Guide; Ansys. Inc.: Canonsburg, PA, USA .
Available at: https://dl.cfdexperts.net/cfd_resources/Ansys_Documentation/Fluent/Ansys_Fluent_Theory_Guide.pdf. Accessed Nov 16, 2023.
[26] http://ftp.demec.ufpr.br/disciplinas/TM702/Versteeg_Malalasekera_2ed.pdf
[27] Intel. Intel® Core™ i9 processors. Available at: https://www.intel.com/content/www/us/en/products/details/processors/core/i9/products.html. Accessed Nov 16, 2023.
[28] Ismaeel TA, Aljabair S, Abdulrazzaq OA, Abood YA. Energy recovery of moving vehicles' wakes in highways by vertical axis wind turbines. FME Trans 2020;48:557565. [CrossRef]
[29] Venkateshan SP. Mechanical measurements. New York: John Wiley & Sons; 2015. Available at: https://onlinelibrary.wiley.com/doi/book/10.1002/9781119115571. Accessed Nov 16, 2023.
[30] Kadum ME, Aljabair S, Imran AA. Experimental and numerical study heat transfer performance for printed circuit board. AIP Conf Proc 2023;2830:070003. [CrossRef]
[31] Wang B-F, Zhou Q, Sun C. Vibration-induced boundary-layer destabilization achieves massive heat-transport enhancement. Sci Adv 2020;6:16. [CrossRef]
[32] Sarhan AR, Karim MR, Kadhim ZK, Naser J. Experimental investigation on the effect of vertical vibration on thermal performances of rectangular flat plate. Exp Therm Fluid Sci 2019;101:231240. [CrossRef]
[33] Leung CW, Kang HJ. Convective heat transfer from simulated air-cooled printed-circuit board assembly on horizontal or vertical orientation. Int Commun Heat Mass Transf 1998;25:6780. [CrossRef]
[34] Li W, Roggenkamp D, Hecken T, Jessen W, Klaas M, Schröder W. Parametric investigation of friction drag reduction in turbulent flow over a flexible wall undergoing spanwise transversal traveling waves. Exp Fluids 2018;59:118. [CrossRef]
[35] Zhang L, Shan X, Xie T. Active control for wall drag reduction: Methods, mechanisms and performance. IEEE Access 2020;8:70397057. [CrossRef]
[36] Çengel YA. Heat transfer: A practical approach. New Yırk: McGraw-Hill series in mechanical Engineering; 2004.
[37] Al-Jabair SJH, AL-Taee AAHA. Experimental study of heat transfer coefficients of shell and helically coiled tube heat exchangers. Eng Technol J 2013;31:172196. [CrossRef]