K. P. KUMAR, A. KUMAR, M. A. KUMAR, P. V. VİNAY

4775

EXPERIMENTAL INVESTIGATION ON AL6061 SILVER COATED COPPER METAL MATRIX COMPOSITE CIRCULAR EXTENDED SURFACES PRE AND POST HEAT TREATMENT

Heat alleviation from surfaces exposed to high heat has been of prominence with the advent of new technologies in the electronic industry. The usage of regular materials and alloys has been used to the hilt and the manufacture of new alloys being slow and with the advent of Metal Matrix Composites, their usage as heat dissipation materials has taken a front row. This is the initiation into developing an MMC of Al6061 with silver coated copper particles to be researched. The usage of Al6061 as a heat sink material and the addition of copper to it to enhance the heat dissipation capability of the material are found to yield encouraging results. This composite when further heat treated yielded even good results that surpassed the usual Al6061 capability of heat augmentation by 39%. Taguchi analysis and ANOVA are performed for the given data.
Keywords:

Stir Casting, Al 6061 MMC’s, Taguchi Analysis, ANOVA, Heat Dissipation,

PDF

___

  • [1] Harahap, F., & McManus, H. N. (1967). Natural convection heat transfer from horizontal rectangular fin arrays. Journal of heat transfer, 89(1), 32-38.
  • [2] Welling, J. R., & Wooldridge, C. B. (1965). Free convection heat transfer coefficients from rectangular vertical fins. Journal of heat transfer, 87(4), 439-444.
  • [3] Leung, C. W., Probert, S. D., & Shilston, M. J. (1985). Heat exchanger: optimal separation for vertical rectangular fins protruding from a vertical rectangular base. Applied Energy, 19(2), 77-85.
  • [4] Yüncü, H., & Anbar, G. (1998). An experimental investigation on performance of rectangular fins on a horizontal base in free convection heat transfer. Heat and Mass Transfer, 33(5-6), 507-514.
  • [5] Starner, K. E., & McManus, H. N. (1963). An experimental investigation of free-convection heat transfer from rectangular-fin arrays. Journal of Heat Transfer, 85(3), 273-277.
  • [6] Jones, C. D., & Smith, L. F. (1970). Optimum arrangement of rectangular fins on horizontal surfaces for free-convection heat transfer. Journal of heat transfer, 92(1), 6-10.
  • [7] Yüncü, H., & Anbar, G. (1998). An experimental investigation on performance of rectangular fins on a horizontal base in free convection heat transfer. Heat and Mass Transfer, 33(5-6), 507-514.
  • [8] Yildiz, Ş., & Yüncü, H. (2004). An experimental investigation on performance of annular fins on a horizontal cylinder in free convection heat transfer. Heat and mass transfer, 40(3-4), 239-251.
  • [9] Kumar, K. P., Vinay, P. V., & Siddhardha, R. (2014). CFD Analysis of Tree Shaped Fin Array on Flat and Symmetrical Wedge Shaped Base Plate. Journal of Thermal Engineering and Applications, 1(1), 1-6.
  • [10] Sukumar, R. S., Sriharsha, G., Arun, S. B., Kumar, P. D., & Sanyasi, C. (2013). Modelling and analysis of heat sink with rectangular fins having through holes.
  • [11] Wange, S. M., & Metkar, R. M. (2013). Computational Analysis of Inverted Notched Fin Arrays Dissipating Heat by Natural Convection. International Journal of Engineering and Innovative Technology (IJEIT) Volume, 2, 328-333.
  • [12] Jaluria, Y., & Yang, J. (2011). A Review of Microscale Transport in the Thermal Processing of New and Emerging Advanced Materials. Journal of Heat Transfer, 133(6), 060906.
  • [13] Barhatte, S. H., & Chopade, M. R. (2012). Experimental and computational analysis and optimization for heat transfer through fins with triangular notch. International Journal of Emerging Technology and Advanced Engineering, 2(7), 483-487.
  • [14] Kraus, A. L., & Bar-Cohen, A. (1995). Design and analysis of heat sinks. Wiley.
  • [15] Kim, S. H., & Anand, N. K. (1994). Laminar developing flow and heat transfer between a series of parallel plates with surface mounted discrete heat sources. International Journal of Heat and Mass Transfer, 37(15), 2231-2244.
  • [16] Taguchi, G. (1986). Introduction to quality engineering: designing quality into products and processes.
  • [17] Cingi, C., Rauta, V., Suikkanen, E., & Orkas, J. (2012). Effect of heat treatment on thermal conductivity of aluminum die casting alloys. In Advanced Materials Research (Vol. 538, pp. 2047-2052). Trans Tech Publications.
  • [18] Senthilkumar, R., Prabhu, S., & Cheralathan, M. (2013). Experimental investigation on carbon nano tubes coated brass rectangular extended surfaces. Applied Thermal Engineering, 50(1), 1361-1368.
  • [19] Xie, G., Song, Y., Asadi, M., & Lorenzini, G. (2015). Optimization of pin-fins for a heat exchanger by entropy generation minimization and constructal law. Journal of Heat Transfer, 137(6), 061901.
  • [20] Rao, R. V., & Waghmare, G. G. (2015). Multi-objective design optimization of a plate-fin heat sink using a teaching-learning-based optimization algorithm. Applied Thermal Engineering, 76, 521-529.
  • [21] Therefore, S. T. C., As, M., & Approved, A. S. S. U. (1995). Guide to the Expression of Uncertainty in Measurement.
  • [22] Bergman, T. L., Lavine, A. S., Incropera, F. P., & Dewitt, D. P. (2011). Fundamentals of heat and mass transfer.
Journal of Thermal Engineering-Cover
  • Başlangıç: 2015
  • Yayıncı: YILDIZ TEKNİK ÜNİVERSİTESİ
Arşiv
Sayıdaki Diğer Makaleler

Y. KARAGÖZ

B. Pekmen GERİDÖNMEZ

K. P. KUMAR, A. KUMAR, M. A. KUMAR, P. V. VİNAY

R. LAUBSCHER, J. H. HOFFMANN

S. PUSAT, M.T. AKKOYUNLU

H. MERCAN, K. ATALIK

K. ABAY, U. COLAK, L. YÜKSEK

İ. DOYMAZ, A. S. KİPCAK

I. DOYMAZ, A. S. KİPCAK, S. COBAN, B. OZKARASU, F. T. SENBERBER, E. M. DERUN

E. CETKİN