Beşir ŞAHİN, Mehmet BİLGİLİ, Nazım KURTULMUŞ

ENERGY AND EXERGY ANALYSIS OF A VAPOR ABSORPTION REFRIGERATION SYSTEM IN AN INTERCITY BUS APPLICATION

A Vapor Absorption Refrigeration (VAR) system driven by the exhaust gas waste heat received from the internal combustion engine of an intercity bus is modeled and analyzed for air-conditioning the intercity bus cabin under different operating parameters. Initially, the hourly comfort cooling load of the intercity bus is calculated for a cooling season spanning five months between May and October in Turkey. After determining the capacity of heat source sufficiency for air-conditioning the intercity bus, energy and exergy analyses of the VAR system are conducted, then designed and compared with the vapor compression refrigeration system in respect to the effect of fuel consumption. The results show that approximately 4,489 kg/year of fuel can be saved by using the VAR system driven by an exhaust gas waste heat in an intercity bus. The maximum coefficient of performance (COP) of the VAR system is obtained as 0.78 at 5 a.m. in May, and the maximum total exergy destruction for the VAR system is obtained as 15.25 kW at 4 p.m. in July. Lastly, the specific time is selected to investigate the effect of operating and environmental parameters on the VAR system.

Keywords:

Energy, Exergy Intercity Bus Air-Conditioning, Vapor Absorption Refrigeration System, Water-Lithium Bromide,

PDF

___

[1] Hwang, Y. (2004). Potential energy benefits of integrated refrigeration system with microturbine and absorption chiller. International Journal of Refrigeration, 27(8), 816-829.
[2] www.johnsoncontrols.com. Application opportunities for absorption chillers. (accessed 17 January 2017)
[3] http://thermaxglobal.com. (accessed 17 January 2017)
[4] Horuz, I. (1998). A comparison between ammonia-water and water-lithium bromide solutions in vapor absorption refrigeration systems. International communications in heat and mass transfer, 25(5), 711-721.
[5] Little, A. B., & Garimella, S. (2011). Comparative assessment of alternative cycles for waste heat recovery and upgrade. Energy, 36(7), 4492-4504.
[6] Saidur, R., Rezaei, M., Muzammil, W. K., Hassan, M. H., Paria, S., & Hasanuzzaman, M. (2012). Technologies to recover exhaust heat from internal combustion engines. Renewable and sustainable energy reviews, 16(8), 5649-5659.
[7] Boatto, P., Boccaletti, C., Cerri, G., & Malvicino, C. (2000). Internal combustion engine waste heat potential for an automotive absorption system of air conditioning part 1: tests on the exhaust system of a spark-ignition engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 214(8), 979-982.
[8] Manzela, A. A., Hanriot, S. M., Cabezas-Gómez, L., & Sodré, J. R. (2010). Using engine exhaust gas as energy source for an absorption refrigeration system. Applied energy, 87(4), 1141-1148.
[9] Koehler, J., Tegethoff, W. J., Westphalen, D., & Sonnekalb, M. (1997). Absorption refrigeration system for mobile applications utilizing exhaust gases. Heat and Mass Transfer, 32(5), 333-340.
[10] Horuz, I. (1999). Vapor absorption refrigeration in road transport vehicles. Journal of Energy Engineering, 125(2), 48-58.
[11] Boatto, P., Boccaletti, C., Cerri, G., & Malvicino, C. (2000). Internal combustion engine waste heat potential for an automotive absorption system of air conditioning part 1: tests on the exhaust system of a spark-ignition engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 214(8), 979-982.
[12] Lambert, M. A., & Jones, B. J. (2006). Automotive adsorption air conditioner powered by exhaust heat. Part 1: conceptual and embodiment design. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 220(7), 959-972.
[13] Kilic, M., & Kaynakli, O. (2007). Second law-based thermodynamic analysis of water-lithium bromide absorption refrigeration system. Energy, 32(8), 1505-1512.
[14] Şencan, A., Yakut, K. A., & Kalogirou, S. A. (2005). Exergy analysis of lithium bromide/water absorption systems. Renewable energy, 30(5), 645-657.
[15] Talbi, M. M., & Agnew, B. (2000). Exergy analysis: an absorption refrigerator using lithium bromide and water as the working fluids. Applied Thermal Engineering, 20(7), 619-630.
[16] Gomri, R. (2009). Second law comparison of single effect and double effect vapour absorption refrigeration systems. Energy Conversion and Management, 50(5), 1279-1287.
[17] Kaynakli, O., Saka, K., & Kaynakli, F. (2015). Energy and exergy analysis of a double effect absorption refrigeration system based on different heat sources. Energy Conversion and Management, 106, 21-30.
[18] Arora, A., Dixit, M., & Kaushik, S. C. (2016). Energy and exergy analysis of a double effect parallel flow LiBr/H2O absorption refrigeration system. Journal of Thermal Engineering, 2(1), 541-549.
[19] Onan, C., Ozkan, D. B., & Erdem, S. (2010). Exergy analysis of a solar assisted absorption cooling system on an hourly basis in villa applications. Energy, 35(12), 5277-5285.
[20] Yılmaz, A. (2015). Transcritical organic Rankine vapor compression refrigeration system for intercity bus air-conditioning using engine exhaust heat. Energy, 82, 1047-1056.
[21] Shu, G., Liu, L., Tian, H., Wei, H., & Xu, X. (2013). Performance comparison and working fluid analysis of subcritical and transcritical dual-loop organic Rankine cycle (DORC) used in engine waste heat recovery. Energy Conversion and Management, 74, 35-43.
[22] Yamankaradeniz, R., Horuz, I., Kaynakli, O., Coskun, S., & Yamankaradeniz, N. (2009). Refrigeration techniques and heat pump applications.
[23] Dincer, I., & Rosen, M. A. (2012). Exergy: energy, environment and sustainable development. Newnes.
[24] Klein, S. A. (2003). EES-engineering equation solver, professional version. F-chart software, Middleton, WI.
[25] Florides, G. A., Kalogirou, S. A., Tassou, S. A., & Wrobel, L. C. (2003). Design and construction of a LiBr–water absorption machine. Energy conversion and management, 44(15), 2483-2508.
[26] Chua, H. T., Toh, H. K., Malek, A., Ng, K. C., & Srinivasan, K. (2000). Improved thermodynamic property fields of LiBr–H2O solution. International Journal of Refrigeration, 23(6), 412-429.
[27] Y.A. Çengel, M. Boles, Thermodynamics: An Engineering Approach. New York: McGraw-Hill Series, 2011.
[28] Anand, D. K., & Kumar, B. (1987). Absorption machine irreversibility using new entropy calculations. Solar Energy, 39(3), 243-256.
[29] S.C. Kaushik, A. Arora, “Energy and exergy analysis of single effect and series flow double effect water–lithium bromide absorption refrigeration systems”, International Journal of Refrigeration, 2009.
[30] Wikipedia, The free encyclopedia, https://en.wikipedia.org/wiki/Brake_specific_fuel_consumption. (accessed 17 January 2017)
[31] Hegar, M., Kolda, M., Kopecka, M., Rajtmajer, V., & Ryska, A. (2013). Bus HVAC energy consumption test method based on HVAC unit behavior. International Journal of Refrigeration, 36(4), 1254-1262.
[32] Robinson, K. K., & Briggs, D. E. (1966). Pressure drop of air flowing across triangular pitch banks of finned tubes. In Chem. Eng. Prog. Symp. Ser (Vol. 62, No. 64, pp. 177-184).
[33] Farshi, L. G., Mahmoudi, S. S., Rosen, M. A., Yari, M., & Amidpour, M. (2013). Exergoeconomic analysis of double effect absorption refrigeration systems. Energy Conversion and Management, 65, 13-25.
[34] Ghassemieh, E. (2011). Materials in automotive application, state of the art and prospects. In New trends and developments in automotive industry. InTechOpen..
[35] Temsa TS45 Broshure, http://chbussales.com/wp-content/uploads/2015/01/2015-TS-45-Brochure_Online.pdf. (accessed 17 January 2017)