___

• REFERENCES
• [1] Abbasian Arani AA, Sadripour S, Kermani S. Nanoparticle shape effects on thermal-hydraulic performance of boehmite alumina nanofluids in a sinusoidal–wavy mini-channel with phase shift and variable wavelength. Int J Mech Sci 2017;128–129:550–563. [CrossRef]
• [2] Ali MM, Alim A, Ahmed SS. Finite element solution of hydromagnetic mixed convection in a nanofluid filled vented grooved channel. J Ther Eng 2021;7:91–108. [CrossRef]
• [3] Güllüce H, Özdemir K. Design and operational condition optimization of a rotary regenerative heat exchanger. Appl Therm Eng 2020;177:115341. [CrossRef]
• [4] Ahmadpour V, Rezazadeh S, Mirzaei I, Mosaffa AH. Numerical investigation of horizontal magnetic field effect on the flow characteristics of gallium filled in a vertical annulus. J Ther Eng 2021;7:984–999. [CrossRef]
• [5] Sadripour S. 3D numerical analysis of atmospheric-aerosol/carbon-black nanofluid flow within a solar air heater located in Shiraz, Iran. Int J Numer Method Heat Fluid Flow 2019;29:1378– 1402. [CrossRef]
• [6] Sobamowo MG, Adesina AO. Thermal performance analysis of convective-radiative fin with temperature-dependent thermal conductivity in the presence of uniform magnetic field using partial noether method. J Ther Eng 2018;4:2287–2302. [CrossRef]
• [7] Ali Aljubury IM, Hussain MK, Farhan A. The optimal geometric design of a v-corrugated absorber solar air heater integrated with twisted tape inserts. J Ther Eng 2023;9:478–496. [CrossRef]
• [8] Bayareh M, Nourbakhsh A. Numerical simulation and analysis of heat transfer for different geometries of corrugated tubes in a double pipe heat exchanger. J Ther Eng 2019;5:293–301. [CrossRef]
• [9] Tokgöz N, Aksoy MM, Şahin B. Experimental investigation of flow characteristics of corrugated channel flow using PIV. J Ther Eng 2016;2:754–760. [CrossRef]
• [10] Alempour SM, Arani AAA, Najafizadeh MM. Numerical investigation of nanofluid flow characteristics and heat transfer inside a twisted tube with elliptic cross section. J Therm Anal Calorim 2020;140:1237–1257. [CrossRef]
• [11] Ahmadi-Senichault A, Arani AAA, Lasseux D. Numerical simulation of two-phase inertial flow in heterogeneous porous media. Transp Porous Media 2010;84:177–200. [CrossRef]
• [12] Arani AAA, Mahmoodi M, Mazrouei Sebdani S. On the cooling process of nanofluid in a square enclosure with linear temperature distribution on left wall. J Appl Fluid Mech 2014;7:591–601. [CrossRef]
• [13] Arani AAA, Abbaszadeh M, Ardeshiri A. Mixed convection fluid flow and heat transfer and optimal distribution of discrete heat sources location in a cavity filled with nanofluid. Chall Nano Micro Scale Sci Technol 2017;5:30–43.
• [14] Sadripour S, Chamkha AJ. The effect of nanoparticle morphology on heat transfer and entropy generation of supported nanofluids in a heat sink solar collector. Therm Sci Eng Prog 2019;9:266–280. [CrossRef]
• [15] Khudheyer AF, Al-Abbas AH, Carutasiu MB, Necula H. Turbulent heat transfer for internal flow of ethylene Glycol-Al2o3 nanofluid in a spiral grooved tube with twisted tape inserts. J Ther Eng 2021;7:761–772. [CrossRef]
• [16] Tokgöz N, Alıç E, Kaşka Ö, Aksoy MM. The numerical study of heat transfer enhancement using al2o3-water nanofluid in corrugated duct application. J Ther Eng 2018;4:1984–1997. [CrossRef]
• [17] Azeez K, Abu Talib AR, Ahmed RI. Heat transfer enhancement for corrugated facing step channels using aluminium nitride nanofluid - numerical investigation. J Ther Eng 2022;8:734–747. [CrossRef]
• [18] Arani AAA, Kakoli E, Hajialigol N. Double-diffusive natural convection of Al2O3-water nanofluid in an enclosure with partially active side walls using variable properties. J Mech Sci Technol 2015;28:4681–4691. [CrossRef]
• [19] Arani AAA, Pourmoghadam F. Experimental investigation of thermal conductivity behavior of MWCNTS-Al2O3/ethylene glycol hybrid Nanofluid: providing new thermal conductivity correlation. Heat Mass Transf 2019;55:2329–2339. [CrossRef]
• [20] Ehteram HR, Arani AAA, Sheikhzadeh GA, Aghaei A, Malihi AR. The effect of various conductivity and viscosity models considering Brownian motion on nanofluids mixed convection flow and heat transfer. Chall Nano Micro Scale Sci Technol 2016;4:19–28.
• [21] Esfe MH, Arani AAA, Aghaie A, Wongwises S. Mixed convection flow and heat transfer in an up-driven, inclined, square enclosure subjected to DWCNT-water nanofluid containing three circular heat sources. Curr Nanosci 2017;13:311–323. [CrossRef]
• [22] Zainal NA, Nazar R, Naganthran K, Pop I. MHD mixed convection stagnation point flow of a hybrid nanofluid past a vertical flat plate with convective boundary condition. Chin J Phys 2020;66:630–644. [CrossRef]
• [23] Mahmoodi M, Arani AAA, Mazrouei S, Nazari S, Akbari M. Free convection of a nanofluid in a square cavity with a heat source on the bottom wall and partially cooled from sides. Therm Sci 2014;18:283–300. [CrossRef]
• [24] Arani AAA, Ababaei A, Sheikhzadeh GA, Aghaei A. Numerical simulation of double-diffusive mixed convection in an enclosure filled with nanofluid using Bejan’s heatlines and masslines. Alex Eng J 2018;57:1287–1300. [CrossRef]
• [25] Lyu Z, Pourfattah F, Arani AAA, Asadi A, Foong LK. On the thermal performance of a fractal microchannel subjected to water and kerosene carbon nanotube nanofluid. Sci Rep 2020;10:7243. [CrossRef]
• [26] Arani AAA, Amani J, Esfeh MH. Numerical simulation of mixed convection flows in a square double lid-driven cavity partially heated using nanofluid. J Nanostr 2012;2:301–311.
• [27] Job VM, Gunakala SR. Numerical study of pulsatile MHD counter-current nanofluid flows through two elastic coaxial pipes containing porous blocks. Int J Heat Mass Transf 2017;113:1265– 1280. [CrossRef]
• [28] Garmroodi MRD, Ahmadpour A, Talati F. MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: A two-phase numerical study. Int J Mech Sci 2019;150:247–264. [CrossRef]
• [29] Eid MR. Chemical reaction effect on MHD boundary-layer flow of two-phase nanofluid model over an exponentially stretching sheet with a heat generation. J Mol Liq 2016;220:718–725. [CrossRef]
• [30] Ma Y, Mohebbi R, Rashidi MM, Yang Z. MHD convective heat transfer of Ag-MgO/water hybrid nanofluid in a channel with active heaters and coolers. Int J Heat Mass Transf 2019;137:714–726. [CrossRef]
• [31] Sheikholeslami M, Rokni HB. Influence of melting surface on MHD nanofluid flow by means of two phase model. Chin J Phys 2017;55:1352–1360. [CrossRef]
• [32] Jafarimoghaddam A. Two-phase modeling of three-dimensional MHD porous flow of Upper-Convected Maxwell (UCM) nanofluids due to a bidirectional stretching surface: Homotopy perturbation method and highly nonlinear system of coupled equations. Eng Sci Technol Int J 2018;21:714–726. [CrossRef]
• [33] Eid MR, Mahny KL. Unsteady MHD heat and mass transfer of a non-Newtonian nanofluid flow of a two-phase model over a permeable stretching wall with heat generation/absorption. Adv Powder Technol 2017;28:3063–3073. [CrossRef]
• [34] Sajid MU, Ali H. Recent advances in application of nanofluids in heat transfer devices: A critical review. Renew Sust Energ Rev 2019;103:556–592. [CrossRef]
• [35] Kumar V, Sarkar J. Experimental hydrothermal behavior of hybrid nanofluid for various particle ratios and comparison with other fluids in minichannel heat sink. Int Commun Heat Mass Transf 2020;110:104397. [CrossRef]
• [36] Izadi A, Siavashi M, Rasam H, Xiong Q. MHD enhanced nanofluid mediated heat transfer in porous metal for CPU cooling. Appl Therm Eng 2019;168:114843. [CrossRef]
• [37] Sheikholeslami M. CuO-water nanofluid flow due to magnetic field inside a porous media considering Brownian motion. J Mol Liq 2018;249:921–929. [CrossRef]
• [38] Soudagar MEM, Kalam MA, Sajid MU, Afzal A, Banapurmath NR, Akram N, et al. Thermal analyses of minichannels and use of mathematical and numerical models. Num Heat Transf Part A: Appl 2020;770:497–537. [CrossRef] [39] Selimefendigil F, Öztop HF. MHD Pulsating forced convection of nanofluid over parallel plates with blocks in a channel. Int J Mech Sci 2019;157-158:726–740. [CrossRef]
• [40] Shirazi M, Shateri A, Bayareh M. Numerical investigation of mixed convection heat transfer of a nanofluid in a circular enclosure with a rotating inner cylinder. J Therm Anal Calorim 2018;133:1061–1073. [CrossRef]
• [41] Sepyani M, Shateri A, Bayareh M. Investigating the mixed convection heat transfer of a nanofluid in a square chamber with a rotating blade. J Therm Anal Calorim 2019;135:609–623. [CrossRef]
• [42] Bayareh M, Kianfar A, Kasaeipoor A. Mixed convection heat transfer of water-alumina nanofluid in an inclined and baffled C-Shaped enclosure. J Heat Mass Transf Res 2018;5:129–138.
• [43] Bayareh M, Nourbakhsh A, Khadivar ME. Numerical simulation of heat transfer over a flat plate with a triangular vortex generator. Int J Heat Technol 2018;36:1493–1501. [CrossRef]
• [44] Vanaki SM, Mohammed HA, Abdollahi A, Wahid MA. Effect of nanoparticle shapes on the heat transfer enhancement in a wavy channel with different phase shifts. J Mol Liq 2014;196:32–42. [CrossRef]
• [45] ANSYS Inc. Ansys Fluent-solver Theory Guide, 2009. Available at: https://www.afs.enea.it/project/neptunius/docs/fluent/html/th/node1.htm. Accessed Nov 9, 2023.
• [46] Behzadmehr A, Saffar-Avval M, Galanis N. Prediction of turbulent forced convection of a nanofluid in a tube with uniform heat flux using a two phase approach. Int J Heat Fluid Flow 2007;28:211219. [CrossRef]
• [47] Hejazian M, Moraveji MK, Beheshti A. Comparative study of Euler and mixture models for turbulent flow of Al2O3 nanofluid inside a horizontal tube. Int Commun Heat Mass Transf 2014;52:152158. [CrossRef]
• [48] Goktepe S, Atalık K, Erturk H. Comparison of single and two-phase models for nanofluid convection at the entrance of a uniformly heated tube. Int J Ther Sci 2014;80:8393. [CrossRef]
• [49] Vyas A, Mishra B, Srivastava A. Investigation of the effect of blockage ratio on flow and heat transfer in the wake region of a cylinder embedded in a channel using whole field dynamic measurements. Int J Ther Sci 2020;153:106322. [CrossRef]
• [50] Kim D, Kwon Y, Cho Y, Li C, Cheong S, Hwang Y, et al. Convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions. Curr Appl Phys 2009;9:119123. [CrossRef]
• [51] Patankar SV. Numerical heat transfer and fluid flow. 1980. Available at: https://catatanstudi.files.wordpress.com/2010/02/numerical-heat-transfer-and-fluid-flow.pdf. Accessed Nov 9, 2023.
• [52] Tzirtzilakis EE, Xenos MA, Loukopoulos VC, Kafoussias N. Turbulent biomagnetic fluid flow in a rectangular channel under the action of a localized magnetic field. Int J Eng Sci 2006;44:12051224. [CrossRef] [53] Tzirtzilakis EE, Sakalis VD, Kafoussias NG, Hatzikonstantinou PM. Biomagnetic fluid flow in a 3D rectangular duct. Int J Num Math Fluids 2004;44:12791298. [CrossRef]
• [54] Aminfar H, Mohammadpourfard M, Kahnamouei YN. A 3D numerical simulation of mixed convection of a magnetic nanofluid in the presence of non-uniform magnetic field in a vertical tube using two phase mixture model. J Magn Magn Mater 2011;323:19631972. [CrossRef]
• [55] Suman S, Khan MK, Pathak M. Performance enhancement of solar collectors - a review. Renew Sust Energ Rev 2015;49:192210. [CrossRef]
• [56] Sundar LS, Naik MT, Sharma KV, Singh MK, Reddy TCS. Experimental investigation of forced convection heat transfer and friction factor in a tube with Fe3O4 magnetic nanofluid. Exp Therm Fluid Sci 2012;37:6571. [CrossRef]
• [57] He YL, Xiao J, Cheng ZD, Tao YB. A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector. Renew Energ 2011;36:976985. [CrossRef]
• [58] Sadaghiyani OK, Pesteei SM, Mirzaee I. Numerical study on heat transfer enhancement and friction factor of LS-2 parabolic solar collector. J Therm Sci Eng Appl 2013;6:1200112010. [CrossRef]
• [59] Cheng ZD, He YL, Xiao J, Tao YB, Xu RJ. Three-dimensional numerical study of heat transfer characteristics in the receiver tube of parabolic trough solar collector. Int Commun Heat Mass Transf 2010;37:782787. [CrossRef]
• [60] Cheng ZD, He YL, Cui FQ, Xu RJ, Tao YB. Numerical simulation of a parabolic trough solar collector with non-uniform solar flux conditions by coupling FVM and MCRT method. Sol Energ 2012;86:17701784. [CrossRef]
• [61] Sokhansefat T, Kasaeian A, Kowsary F. Heat transfer enhancement in parabolic trough collector tube using Al2O3/synthetic oil nanofluid. Renew Sust Energ Rev 2014;33:636644. [CrossRef]
• [62] Molana M, Dogonchi AS, Armaghani T, Chamkha AJ, Ganji DD, Tlili I. Investigation of hydrothermal behavior of Fe3O4-H2O nanofluid natural convection in a novel shape of porous cavity subjected to Magnetic Field Dependent (MFD) viscosity. J Energy Storage 2020;30:101395. [CrossRef]
• [63] Sha L, Ju Y, Zhang H, Wang J. Experimental investigation on the convective heat transfer of Fe3O4/water nanofluids under constant magnetic field. Appl Therm Eng 2017;113:566574. [CrossRef]
• [64] Timofeeva EV, Routbort JL, Singh D. Particle shape effects on thermophysical properties of alumina nanofluids. J Appl Phys 2009;106:014304. [CrossRef]
• [65] Dogonchi AS, Asghar Z, Waqas M. CVFEM simulation for Fe3O4-H2O nanofluid in an annulus between two triangular enclosures subjected to magnetic field and thermal radiation. Int Commun Heat Mass Transf 2020;112:104449. [CrossRef]