International Journal of Energy Applications and Technologies
- Numerical investigation of airfoils aerodynamic performances
- Markov Chain theoretic approach to modelling industrial safety: some results from Nigeria oil and gas industry
- Electromechanical modeling of energy harvesting for FRP composite structures coupled with piezoelectric transducers
- Design and construction of a wood-based modified yam pounder machine
- An experimental and theoretical examination of pine woods dried in the vacuum dryer by artificial neural network
- As a case study, energy analysis application of a hotel business in private sector
- Autonomous solar panel cleaning robot with rubber wheeled and air-absorbing motor
- Investigation of the combustion and fuel properties of slurry fuels formed by biomass and coal
- Leakage detection in underwater oil and natural gas pipelines using convolutional neural networks
- Examination of parametric cycle analysis of a turbofan engine with Python code
- Experimental investigation of heat transfer in aluminum wings with NACA 4040 profile
- The verify of experimentally drag reduction by flow control rod application on bus model using computational fluid dynamic
- Using alternative energy in aircraft
- Solar power plant generation forecasting using NARX neural network model: A case study
- Investigation of the improvement of Sivas-Kangal lignites liquefaction product yields
- Study on the modeling and simulation of a grid-connected battery energy storage system based on cascaded h-bridge converter
- Numerical energy and exergy analysis of cooling systems: low GWP alternative refrigerants (R450A and R1234ze) to R134a
- A study on the effect of blade inlet angle, attack angle and the diameter ratio on the efficiency of a Banki Mitchell turbine
- Policy intervention and its consequences on the environment to combat climate change– A case from Bhutan
- The influences of gasoline and diesel fuel additive types
- Overview a nearly zero energy building
- Obtaining biodiesel from the enzymatic reaction of bioethanol and crude palm oil which is a fermentation product of corn cob with microorganisms, and the extraction of bioactive substances from the physical refining of biodiesel
- A comparison of PSO and Fmincon methods for finding optimum operating speed and time values in trams
- The use of supercapacitor in smart metering gateway
- Performance analysis of vapor compression refrigeration system using mixed refrigerant R410A
- Estimation of wind speed with artificial neural networks method for Isparta using meteorological measurement data
- A review on recent opportunities in MATLAB software based modelling for thermoelectric applications
- Application of auto-regressive time series model to marginal oil field production in Nigeria
- Maximum wind speed forecasting using historical data and artificial neural networks modeling
- Smart metering field implementation with power line communication in low voltage distribution grid
- Analysis of electronic circuit transformer with experimental and finite elements
- Hydrogen production from groundnut shell via circulating fluidized bed technology
- A multivariate nonlinear regression model for the resistance power of a light rail vehicle
- Energy, environmental and enviroeconomic analysis of the use R134a/R1234yf (10/90) as replace to R134a in a vapor compression cooling system
- Detecting chemicals with high yield in pyrolytic liquid of spirulina sp. microalgae via GC-MS
- Comparative exergy analysis of the cascade cooling system for alternative refrigerant couples
- Anaerobic co-digestion of food waste, goat and chicken manure for sustainable biogas production
- Experimental flow analysis of vertical axis turbine for power generation in open channel system
- Fracture energy comparison of aluminum and boron composites for fuel cell end plates
- Investigation of the effects of biofuels on vehicle performance and emissions
- An overview on the use of nanotechnology in the renewable energy field
- Natural convection from perforated vertical fins with different hole diameters
- Analysis of pollution load originating from cattle, small ruminant and poultry: A comparative case study for Isparta, Turkey
- The design of biaxial solar tracking with a smart house model
- Unraveling optimum culture composition for hydrogen and 5-aminolevulinic acid production by Rhodobacter sphaeroides O.U.001
- Kinetics and thermodynamics of lipids extraction from microalgae using n-hexane
- Artificial neural networks modelling for biodiesel production from waste cooking oil
- A factorial analysis on the built-in risks influencing marginal oil field development in Nigeria
- Estimation of li-ion battery state of charge using adaptive neural fuzzy inference system (ANFIS)
- Power transformer demand forecast with Box Jenkins ARIMA model
- Experimental examination of a thin-film photovoltaic panel power characteristics under constant load during October-March period in Mersin province
- Optimization of a grid connected hybrid energy system
- Numerical simulation of flow over NACA 0015 airfoil with different turbulence models
- Renewable energy politics from the perspectives sustainability: Economy, ecology and energy
- Comparison of kernel functions of support vector machines: A case study for the solar cell output power prediction
- A comparative analysis of four-pole brushless DC motors with different slot and winding arrangement based on THD values
- Evaluation of biodiesel produced from tea seed oil in terms of fatty acid components
- Thermal efficiency evaluation of an organic Rankine cycle with n-pentane as working fluid
- Induction assisted pasteurization of honey
- Effect of iridium spark plug gap on emission, noise, vibration of an internal combustion engine
- Particle mass and gaseous emissions from small scale modern wood stoves
- Effects of biodiesel usage on mechatronic components in automobiles with diesel engine: A review
- Generation unit sizing, economic analysis of grid connected and standalone PV power plant
- A new intelligent system design for cleaning the photovoltaic solar panel surface
- Modeling and simulation of a grid-connected PV system under varying environmental conditions
- Drag reduction of a bus model by passive flow canal
- On power transformers energy efficiency based load transfer analysis
- Techno-economic assessment of biogas energy from animal wastes in central areas of Palestine: Bethlehem perspective
- Solar tracking system with PID control of solar energy panels using servo motor
- The effect on the wind power performance of different normalization methods by using multilayer feed-forward backpropagation neural network
- Energy and exergy analysis of an organic Rankine cycle under different heat source and turbine inlet temperature conditions
- A review on biodiesel production using eggshell as catalyst
- Thermodynamic analysis of an ejector cooling system using R123 as refrigerant under different working conditions
- Investigation of the energy (biogas) production from co-digestion of organic waste materials
- Design and analysis of PV fed SRM system
- Greenough River Solar Farm case study & validation initialization
- Evaluation of the energy potential of cow dung in microbial fuel cell for micro-power applications in Nigeria
- Biodiesel production using reactive distillation column: Real time model predictive control in Matlab Simulink
- Evaluation of combustibility and energy potential of municipal solid waste: The case of Esenler Municipality
- Robust uncertainty modelling of energy variations in electric motors for efficient and reliable mechanical structural analysis
- Solar star projects SAM version 2017.9.5 PVwats version 5 model case study & validation
- Determination of optimum insulation thicknesses, energy savings and environmental impacts with respect to heating and cooling degree-days for different climate regions of Turkey
- Proposal of an analog voltmeter PCB’s design layout based on DFMEA methodology for failure reduction
- Investigation of effects of spark plug gap on vibration, noise and HC emission in a gasoline engine
- SOLAR PV SYSTEM COST ANALYSIS FOR A SMART HOME
- Application of Rural Photovoltaic Water Pumping System Using Immersed Pump and DC Motor
- 1P3S HIGH FREQUENCY TRANSFORMER BASED DUAL-ACTIVE BRIDGE DC-DC CONVERTER
- THE EFFECT OF USE OF AIR CONDITIONER ON ENGINE VIBRATION IN GASOLINE CAR ENGINES
- Future Demand For Nuclear Energy In Turkey
- IJEAT 4(3) Cover Page
- THERMODYNAMIC ANALYSIS OF THE ORGANIC RANKINE CYCLE AND THE EFFECT OF REFRIGERANT SELECTION ON CYCLE PERFORMANCE
- Using a New Method based on Finsler Geometry for Wind Speed Modelling
- Miniaturized Model of a Macro Fiber Composite Piezoelectric Transducer Based Wind Tunnel and Its Optimization for Energy Harvesting
- SELECTION OF A SOLAR POWER PLANT LOCATION BY USING AHP METHOD
- SELECTION OF A SUITABLE WIND POWER PLANT WITH ECONOMICAL ANALYSIS FOR AMASRA CITY, TURKEY
- ESTIMATION OF FAST VARIED WIND SPEED BASED ON NARX NEURAL NETWORK BY USING CURVE FITTING
- IJEAT 4(2) Cover Page
- A Comparison of Sequential Quadratic Programming, Genetic Algorithm, Simulated Annealing, Particle Swarm Optimization and Hybrid Algorithm for the Design and Optimization of Golinski’s Speed Reducer
- Development of a household anaerobic digester for rural areas in Sudan
- Impact of Vehicle Hybridization on Fuel Consumption Economy
- Experimental Investigation of Laminar Convective Heat Transfer and Pressure Drop of Al2O3/Water Nanofluid in Circular Tube Fitted with Twisted Tape Insert
- Measurement of Energy Consumption of WSN for Indoor Environment
- THE EFFECTS OF INCENTIVES ON RENEWABLE ENERGY RESOURCES FOR HOME USERS
- IJEAT 4(1) Cover Page
- The Effect of Viewing Angle on Detection of Landmines from Thermal Time Series Images Using Active Thermography
- Analysis and Design of an Axial-Flux Coreless Permanent Magnet Synchronous Generator with Single Stators and Double Rotors
- Methanol Combustion Simulation via CFD
- Grounding Systems Design with 3D-software for Solar Chimney Power Plant
- Characterization of Al Doped ZnO Nanostructures via an Electrochemical Route
- OPTICAL PERFORMANCE INVESTIGATION OF A CLFR FOR THE PURPOSE OF UTILIZING SOLAR ENERGY IN TURKEY
- THE DEPLOYMENT OF MICROGRID AS AN EMERGING POWER SYSTEM IN UZBEKISTAN
- LAMINAR NATURAL CONVECTION IN TRIANGULAR ENCLOSURES
- HEAT TRANSFER OF TWO PHASES (WATER – AIR) IN HORIZONTAL SMOOTH AND RIBBED DUCTS
- PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES
- WIND SPEED MODELLING USING INVERSE WEIBULL DISTRUBITION: A CASE STUDY FOR BİLECİK, TURKEY
- ENERGY ANALYSIS FOR AN AIR-CONDITIONING SYSTEM OF A COMMERCIAL AIRCRAFT: CASE STUDY FOR AIRBUS A330
- MONTHLY OPTIMIZATION OF A NEW HYBRID RENEWABLE ENERGY SYSTEM CONSIDERING ENERGY AND AGRICULTURAL EFFICIENCY
- A WIND POWER PLANT FEASIBILITY STUDY FOR BURSA, GEMLIK REGION IN TURKEY BY WINDSIM SOFTWARE
- ENERGY IMPORT DEPENDENCY AND SEEKING FOR NEW ENERGY TECHNOLOGIES EUROPEAN UNION CASE
- COMPARISON OF CFD AND XFOIL AIRFOIL ANALYSES FOR LOW REYNOLDS NUMBER
- MINI-SCALED HORIZONTAL AXIS WIND TURBINE ANALYSIS BY QBLADE AND CFD
- REVIEW OF THE BISMUTH TELLURIDE (Bi2Te3) NANOPARTICLE: GROWTH AND CHARACTERIZATION
- Yayın Aralığı: Yılda 2 Sayı
- Başlangıç: 2014
- Yayıncı: İlker ÖRS
24.2b 15.8b