Effect of iridium spark plug gap on emission, noise, vibration of an internal combustion engine

Effect of iridium spark plug gap on emission, noise, vibration of an internal combustion engine

The most important factors affecting comfort and performance in motor vehicles are; The exhaust gases generated by the internal combustion engine are noise and vibration. The effect of these factors can be reduced thanks to the fully efficient and regular operation of the engine. The most important part affecting the efficient operation of the spark plug ignition engine is the spark plug. Spark plug failure; emission, noise and vibration values increase. These negative effects reduce vehicle comfort and increase travel costs; it also causes more damage to nature. Vehicles are designed and manufactured to ensure optimum operating parameters during production. However, changes in these parameters occur as the vehicle is used and different types of parts are used during maintenance. In this study, spark plug nail spacing; Emission, noise and vibration effects and determination of optimum nail spacing. In the experiments, iridium spark plug was used as ignition spark type. The spark plugs wear out because the engine fires continuously during operation. This wear increases the distance between the center electrode and the electrode cap and changes the resulting spark quality. According to the experiments; When the iridium spark plug nail spacing is 0.8 mm, the noise is optimum at different revolutions, the vibrations in the 0.9 mm nail spacing increase at low revolutions, and the hydrocarbon value is minimized at high revolutions in the 0.8 mm spark plug nail spacing.

___

  • Çakıroğlu, M., 1996, “Exhaust Emission on Traffic of Engine Vehicles”, I. International Transportation Symposium,Istanbul, Turkey.
  • Uyumaz, A., Boz,F., Yılmaz,E., Solmaz, H., Polat, S., (2017), Developments of Decreasing Methods of Vehicles Exhaust Emission, Mehmet Akif Ersoy University Journal of Science Institutes,15-24,22
  • Alkaya, B., Yıldırım, M. A., 2000, “Decreasing Methods of Pollutants Originating from Vehicles ”, Journal of Ecology Environment, January-February-March 2000, (34):15-20.
  • Kuş, R., 2000, ‘‘Systems of Emission Control at Engine Vehicles ’’, lecture notes, Konya, Turkey.
  • Soruşbay, C., 2010, “Precautions that are taken at automotive industry and air pollution from originating traffic”, 4. National Air pollution and the Control, 25-27 october 2010, Ankara, Turkey.
  • Kaytakoğlu, S., Var, F., Öcal, S. E., 1995, “Pollutions from Engine Vehicles and Removal Methods”, Combustion and Air Pollution 3. National Symposium , Ankara, Turkey.
  • Sert, İ., 2008, In the City Center of Balıkesir Calculating Emission Inventory from Engine Vehicles, Master’s Thesis, Balıkesir, Turkey.
  • Schafer, F., Basshuysen, R. V., 1995, “Reduced Emissions and Fuel Consumption in Automobile Engines”, Springer-Verlag Press, 6, Germany.
  • Haşimoğlu, C., İçingür, Y., Öğüt, H., 2002, “experimental analysis of effects of exhaust gases recirculation(EGR) at diesel engine on exhaust emission and engine”, Journal Tubitak, 26 (2002), 127-135.
  • Çetin, E., Eroğlu, M.,Aktürk, N., 2002, “Noise that cause of vehicles engines”, International Traffic and congress and Exposition of Road, 8-10 March 2002, Ankara, Turkey.
  • Aktürk, N., Ünal, Y., 1998, “Noise, Challange on Noise and Traffic”, Gazi University. Science Institutes Journal, Issue 3, sf. 21 – 32.
  • Toprak, R., Aktürk, N., 2001, “Environmental Noise cause of Rail Transport Systems” UCTEA Chamber of Mechanical Engineers, Urban Transportation Symposium in Istanbul, 28-30 June, Istanbul, Turkey.
  • Aktürk, N., Ercan, Y. ve Durmaz, A., 2000, "Determination of Noise Caused by Izmir Adnan Menderes Airport ", Gazi UniversityScience Institutes Journal, C. 13, No 2, April, sf. 289-302, Ankara, Turkey.
  • Aktürk, N., Gürpınar, M., 2001, traffic and Road Safety Congress, 25-27 April, Gazi University, sf. 346-359, Ankara, Turkey.
  • Öge, A., Öğüt, T., 1998, “Internal Performance Analysis of an Automobile Exhaust System”, IV. National Acoustic Congress, 29-31 October , Kaş/Antalya, Turkey.
  • Mayda, M., Gültekin, N., Sevim, İ., Özçelik, Z., 2018, “İridyum Ateşleme Buji Tırnak Aralığının Motor Titreşimine Etkisi” 3'rd International Symposium on Industrial Design & Engineering (ISIDE2018), 22-24 November, SF.590-592, Antalya, Turkey