Design and construction of a wood-based modified yam pounder machine
Design and construction of a wood-based modified yam pounder machine
This study focused on the design and construction of a wood-based modified yam pounder machine. The high cost of producing yam pounder machine using stainless steel and other metals poses great challenges in terms of efficiency and affordability. In this study, a yam pounder was produced from hardwood obtained from Oak tree which is a locally sourced material with a view to eliminating the tedious and laborious process of preparing pounded yam. The hardwood log of 220 mm long was turned to a diameter of 240 mm using wood lathe machine. Other components were machined to their appropriate sizes based on designed specification before assembling. The designed yam pounder was used to pound 1.034 kg of cooked white yam for three minutes; the same were carried out with the existing yam pounder for three minutes under the same condition. The results obtained from performance tests showed that there was no yam seed from the designed yam pounder but there were few yam seeds in the existing yam pounder. This showed that the designed yam pounder pounds better than the existing one.
___
- Siciliano-Rosen,L. (2021). "Fufu” Encyclopedia Britannica. https://www.britannica.com/topic/fufu
- Osueke C. O. (2010). Design and Construction of a yam pounding machine. Department of Mechanical/Production Engineering Enugu State University of Science and Technology, Enugu State, Nigeria. Available online: http://engrcosueke.blogspot.com/2010/10/design-and-construction-of-yam-pounding.html
- Odior A.O., Orsarh E.S. (2008). Design and Construction of a yam pounding machine, Internaitonal Journal of Natural and Applied Science. 4(3):319-323.
- Mignouna, H.D., Abang, M.M. and Asiedu, R. (2003). Harnessing Modern Biotechnology for Tropical Tuber Crop Improvement: Yam (Dioscorea spp.) Breeding. African Journal Biotechnology, 2, 478-485.
- Zheng, J. and Wang, Y. (2018) Research on Knowledge Resources Investment Decisions in Cooperated New Product Development. Journal of Service Science and Management, 11, 101-115.
- Faluyi O. and Opadoja D. (2018). Design and Fabrication of Porridge and Yam Flour Mixing Machine. International Journal of Sciences, Engineering and Environmental Technology, 3(7): 23-47.
- John Ridgeon (2010), Bushcraft e-books, available online
- Ighodalo O. (2003) Design of machine elements 2. Ambik –Press, Benin City. Book 2, pp1-9.
- Carl H. Zeeuw D. (2020). Mark’s standard Handbook for mechanical Engineers, McGraw-Hill Book Company, pp.6-124.
- Habart and Kenwood (2007). Power Splitters. Patent and Design journal, 61(59): 522-525.
- Imohiosen M. (2007) Design and construction of a yam pounding machine B.Eng. Thesis, Ambrose Alli University, Ekpoma, Edo State, Nigeria.
- Shighley J.E. (1972) Mechanical Engineering design. (2nd Edition) McGraw Hill Book company, New York pp. 626-630.
- Olodu D.D. (2020). Machine Design Lecture Note, Benson Idahosa University, Edo State, Nigeria, pp. 2-34.
- Deutschman, Aaron, D, Walter M., Charles W. (1975), Machine Design Theory and Practice, New York, Macmillan Publishing Co. Inc. pp. 5-43.
- BSSA (2009). British Stainless Steel Association, Collection techniques Agricoleset Productions Tropicales. 8 (36); 408-412.
- Yayın Aralığı: Yılda 2 Sayı
- Başlangıç: 2014
- Yayıncı: İlker ÖRS