ESD Yöntemi ile W, WC ve Alaşımlı Çelik Kaplanan AISI 1008 Çelik Plakaların Düşük Hız Balistik Performansları
Yüzey aşınma özelliklerini ve korozyon performansını daha fazla arttırmak amacıyla metalik yüzeylereElektro Kıvılcım Biriktirme (ESD) veya Düşük Enerji Kaynaklı (LEW) kaplama uygulanır. Bu amaçla,kaplama tabakasının oluşumunu kolaylaştırmak için işlemin bu süreci için bir aktüatör kullanılır. Buçalışmada, ESD kaplamalar çeşitli çelik plakalar üzerine uygulanmış ve çelik plakalara yapılankaplamaların metalurjik ve fiziksel özellikleri karakterize edilmiştir. ESD kaplı çelik plakalar üzerindedüşük hızlı / darbe enerjili balistik testler yapılmış ve kaplamanın sertliği arttıkça kaplamanın düşükdarbe enerjili balistik performansının düşük hızdaki parçacık etkisinden veya araçlar ve diğer nesnelerkorunma açısından umut verici olduğu ortaya çıkmıştır.
Low Speed Ballistics Performance of AISI 1008 Steel Coated with W, WC and Alloyed Steel by ESD Method
Electro Spark Deposition (ESD) or Low Energy Welding (LEW) coating is applied on metallic surfaces for the purpose of increasing surface wear properties and better corrosion performance. For this purpose, an actuator is employed for this course of the process in order to ease the formation of the coating layer. In this study, ESD coatings have been applied onto steel plates and metallurgical and physical properties of the coatings have been characterized. Low-Speed/impact energy ballistic tests have been carried out on ESD coated steel plates and it is revealed that as the hardness of the coating is increased the low impact energy ballistics performance of the coating becomes promising for the protection from low speed particle impact of vehicles and other objects.
___
- Agarwal, A. and Dahotre, N.B., 1998. Pulse Electrode
Deposition of Superhard Boride Coatings on a Ferrous
Alloy, Surface and Coatings Technology, 106(2-3),
242-250
- Binay, H., 2016. CTP Destekli AA-6082 T6 Levhalarda
Terminal Balistik Özelliklerinin İncelemesi, Yüksek
Lisans Tezi, Yıldız Teknik Üniversitesi Fen Bilimleri
Enstitüsü, Metalurji ve Malzeme Mühendisliği
Anabilim Dalı, İstanbul, 78
- Bozkurt, A., 2018. ESD İle Sert Faz Kaplanmış Titanyum
Alaşımlarının ve Çeliklerin Lazer ile İşlenmesi ve
Karakterizasyonu, Yüksek Lisans Tezi, Afyon Kocatepe
Üniversitesi, Fen Bilimleri Enstitüsü, Metalurji ve
Malzeme Mühendisliği Anabilim Dalı, Afyon, 82
- Brown, E.A, Sheldon, G.L. and Bayoumi, A.E. 1990. A
Parametric Study of Improving Tool Life by
Electrospark Deposition, Wear, 138, 137-151.
- Chenglong, L., Dazhi, Y., Guoqiang, L. and Min, Q. 2005.
Corrosion Resistance and Hemocompatibility of
Multilayered Ti/TiN Coated Surgical AISI 316L
Stainless Steel, Materials Letters, 59(29–30), 3813–
3819.
- Gil, L., Brühl, S., Jiménez, L., Leon, O., Guevara, R. and
Staia, M.H. 2006. Corrosion Performance of the
Plasma Nitrided 316 L Stainless Steel, Surface &
Coatings Technology, 201, 4424–4429.
- Gould, J. 2011. Application of Electro-Spark Deposition as
a Joining Technology, Welding Journal, 90, 191-197.
- Holliday, R., Parker, J.D. and Williams, N.T. 1995.
Electrode Deformation When Spot Welding Coated
Steels, Welding in the World, 35(3), 160-164.
- Hong, X., Tan, Y.F., Zhou, C.H., Xu, T. and Zhang, Z.W.
2015. Microstructure and Tribological Properties of
Zr-Based Amorphous-Nanocrystalline Coatings
Deposited on the Surface of Titanium Alloys by
Electrospark Deposition, Applied Surface Science, 356,
1244-1251.
- Johnson, R.N. and Sheldon, G.L. 1986. Advances in the
Electro-Spark Deposition Coating Process, Journal of
Vacuum Science and Technology, A4, 2740-2745.
- Kayalı Y. ve Talaş, Ş., 2017. ESD Yöntemiyle WC Kaplanmış
Çeliklerin Aşınma Davranışı, CIEA 2018, Cumhuriyet
Üniversitesi, Sivas, 20-22 Eylül, 1-7
- Korkmaz, K., 2008. Elektrospark Biriktirme Yöntemiyle
Mikro Alaşımlı Çeliklerin Tungsten Karbür ile
Kaplanması, Doktora Tezi, Gebze Yüksek Teknoloji
Enstitüsü, Mühendislik ve Fen Bilimleri Enstitüsü,
Gebze, 102
- Lancaster, F., 1984. The Physical Properties of Fluids at
Elevated Temperatures, Chapter 2, The Physics of
Welding, Pergamon Press, 9-42
- Levashov, E.A., Zamulaeva, E.I., Kudryashov, A.E., Vakaev,
P.V., Petrzhik, M.I. and Sanz, A. 2007. Materials
Science and Technological Aspects of Electrospark
Deposition of Nanostructured WC-Co Coatings onto
Titanium Substrates, Plasma and Processing of
Polymers, 4, 293-300
- Milligan, J., Heard, D.W. and Brochu, M. 2010. Formation
of Nanostructured Weldments in the Al-Si System
Using Electrospark Welding, Applied Surface Science,
256, 4009-4016.
- Sara, R.V. 1965. Phase Equilibria in the System
Tungsten—Carbon, Journal of the American Ceramic
Society, 48(5), 251 – 257.
- Srivathsa, B. and Ramakrishnan, N. 1997. On the Ballistic
Performance of Metallic Materials, Bulletin of
Materials Science, 20/1, 111-123.
- Talaş, Ş. ve Gökçe, B., 2017. Elektrod Şeklinin EKB
Yönteminde Güç Yoğunluğu ve Isı Transferi Şekline
Etkisi, IDEFIS’17, Uluslararası Savunma Sanayii
Semposyumu, Kırıkkale, 123-130.
- Talaş, S., Mertgenç, E ve Gökçe, B. 2016. ESD coating of
copper with TiC and TiB2 based ceramic matrix
composites, Materials Science and Engineering, 146,
1-9.
- Theisen, W. 1998. Hartphasen, in Hartlegierungen und
Hartverbundstoffe: Hrsg. Hans
Berns. Springer-Verlag Berlin. 28
- Topaç, H., 2014. Çelik Yüzeylerin Elektrospark Alaşımlama
Yöntemi Kullanılarak Kromkarbür- Nikelkrom İle
Kaplanması, Yüksek Lisans Tezi, Gebze Yüksek
Teknoloji Enstitüsü, Mühendislik ve Fen Bilimleri
Enstitüsü, Gebze, 98
- Uysal, M., 2006. CrN, TiN Kaplanmış ve Kaplanmamış AISI
304 Paslanmaz Çeliğin Korozyon Özellikleri, Yüksek
Lisans Tezi, Gazi Üniversitesi, Fen Bilimleri Enstitüsü,
Ankara, 93
- Warnet, L. and Reed, P.E. 1999 Falling Weight Impact
Testing Principles”, G. W. Swallowe Ed. “Mechanical
Properties and Testing of Polymers, Springer, Chp 17,
pp 66-70
- Wei, X., Chen, Z.G., Zhong, J. and Xiang, Y. 2016.
Feasibility of Preparing Mo2FeB2-Based Cermet
Coating by Electrospark Deposition on High Speed
Steel, Surface Coating Technology, 296, 58-64.