Birol SOYSAL

102122

Real-time control of an automated guided vehicle using a continuous mode of sliding mode control

This paper proposes a tracking control method for a certain type of differential-drive wheeled mobile robot, called automated guided vehicles (AGVs), using a continuous mode approach of sliding mode control (SMC). The SMC applied produces a continuous signal in between the U and -U control signals instead of discrete ones. The controller is applied to control the velocity and direction angle of the vehicle in order to keep it on a desired path. The obtained algorithm is applied to the experimental system under load and disturbance to show its robustness. The experimental results are satisfactory and verify the performance of the control algorithm.
Anahtar Kelimeler:

Automated guided vehicle, trajectory tracking, sliding mode control

Real-time control of an automated guided vehicle using a continuous mode of sliding mode control

This paper proposes a tracking control method for a certain type of differential-drive wheeled mobile robot, called automated guided vehicles (AGVs), using a continuous mode approach of sliding mode control (SMC). The SMC applied produces a continuous signal in between the U and -U control signals instead of discrete ones. The controller is applied to control the velocity and direction angle of the vehicle in order to keep it on a desired path. The obtained algorithm is applied to the experimental system under load and disturbance to show its robustness. The experimental results are satisfactory and verify the performance of the control algorithm.
Keywords:

Automated guided vehicle, trajectory tracking, sliding mode control,

PDF
Turkish Journal of Electrical Engineering and Computer Science-Cover
  • ISSN: 1300-0632
  • Yayın Aralığı: Yılda 6 Sayı
  • Yayıncı: TÜBİTAK
Arşiv
Sayıdaki Diğer Makaleler

New approach using structure-based modeling for the simulation of real power/frequency dynamics in deregulated power systems

Mostafa EIDIANI, Hossein ZEYNAL

pRediCS: A new GO-PO-based ray launching simulator for the calculation of electromagnetic scattering and RCS from electrically large and complex structures

Caner ÖZDEMIR, Betül YILMAZ, Özkan KIRIK

Induction motor parameter estimation using metaheuristic methods

Ali İhsan ÇANAKOĞLU, Asım Gökhan YETGİN, Hasan TEMURTAŞ, Mustafa TURAN

Class-E GaAs HBT power amplifier with passive linearization scheme for mobile wireless communications

Uthirajoo ESWARAN, Harikrishnan RAMIAH, Jeevan KANESAN, Ahmed Wasif REZA

Stability analysis of multimachine thermal power systems using the nature-inspired modified cuckoo search algorithm

Shivakumar RANGASAMY, Panneerselvam MANICKAM

Reliability-based maintenance scheduling of generating units in restructured power systems

Mahmud FOTUHI-FIRUZABAD, Farrokh AMINIFAR, Abbas SHAHZADEH

Comparative learning global particle swarm optimization for optimal distributed generations' output

Jasrul Jamani JAMIAN, Hazlie MOKHLIS, Mohd Wazir MUSTAFA, Mohd Noor ABDULLAH, Muhammad Arif BAHARUDIN

Solving a new bi-objective joint replenishment inventory model with modified RAND and genetic algorithms

A novel fuzzy filter for speckle noise removal

Mehmet Ali SOYTÜRK, Alper BAŞTÜRK, Mehmet Emin YÜKSEL

Digital control system design and analyses of a 3-phase bearingless induction motor

Wenshao BU, Conglin ZU, Shaojie WANG, Shenghua HUANG