Wenshao BU, Conglin ZU, Shaojie WANG, Shenghua HUANG

Digital control system design and analyses of a 3-phase bearingless induction motor

The overall configuration of a magnetic suspension decoupling control system is designed to realize the reliable digital control of a 3-phase bearingless induction motor whose rotor windings are not pole-specific. Based on a digital signal processor complementary metal-oxide semiconductor chip, the digital control hardware and software systems are analyzed and designed. In this paper, the calculation and regulation of the motor rotational speed, correction and regulation methods of the radial displacements, calculation and compensation algorithms of the unilateral magnetic pulls, induction compensation algorithm of the effective suspension control current, current regulation, and space-vector pulse width modulation algorithms, are presented in detail. The experimental results verify the feasibility and practicability of the designed decoupling digital control system of the 3-phase bearingless induction motor.

Anahtar Kelimeler:

Three-phase bearingless induction motor, magnetic suspension decoupling control, digital control system, measurement and regulation of signals, compensation and control

Digital control system design and analyses of a 3-phase bearingless induction motor

Keywords:

Three-phase bearingless induction motor, magnetic suspension decoupling control, digital control system, measurement and regulation of signals, compensation and control,

PDF

___

H.I. Lee, S.Y. Yoo, “Toroidally—Wound self—bearing BLDC motor with Lorentz force”, IEEE Transactions on Magnetics, Vol. 46, pp. 2148—2151, 2010.
H. Grabner, W. Amrhein, S. Silber, “Nonlinear feedback control of a bearingless brushless DC motor”, IEEE/ASME Transactions on Mechatronics, Vol. 15, pp. 40—47, 2010.
K. Raggl, B. Warberger, T. Nussbaumer, “Robust angle-sensorless control of a PMSM bearingless pump”, IEEE Transactions on Industrial Electronics, Vol. 56, pp. 2076—2085, 2009.
EF. Rodriguez, J.A. Santisteban, “An improved control system for a split winding bearingless induction motor”, IEEE Transactions on Industrial Electronics, Vol. 58, pp. 3401—3408, 2011.
W.S. Bu, S.H. Huang, S.M. Wan, “General analytical models of inductance matrices of four-pole bearingless motors with two-pole controlling windings”, IEEE Transactions on Magnetics, Vol. 45, pp. 3316—3321, 2009.
S.R. Zhang, FL. Luo, “Direct control of radial displacement for bearingless permanent-magnet—type synchronous motors”, IEEE Transactions on Industrial Electronics, Vol. 56, pp. 542—552, 2009.
H. Nian, Y.K. He, L. Huang, “Sensorless operation of an inset PM bearingless motor implemented by the combi- nation approach of MRAS and HF signal injection”, Proceedings of the World Congress on Intelligent Control and Automation, Vol. 2, pp. 8163—8167, 2006.
X. Cao, ZL). Deng, G. Yang, “Independent control of average torque and radial force in bearingless switched- reluctance motors with hybrid excitations”, IEEE Transactions on Power Electronics, Vol. 24, pp. 1376—1385, 2009. [10] A. Chiba, J.A. Santisteban, “A PWM harmonics elimination method in simultaneous estimation of magnetic Şeld and displacements in bearingless induction motors”, IEEE Transactions on Industry Applications, Vol. 48, pp.
A. Chiba, K. Sotome, Y. Iiyama, “A novel middle-point-current-injection—type bearingless PM synchronous motor for vibration suppression”, IEEE Transactions on Industry Applications, Vol. 47, pp. 1700—1706, 2011.
A. Chiba, R. Furuichi, Y. Aikawa, “Stable operation of induction-type bearingless motors under loaded conditions”, IEEE Transactions on Industry Applications, Vol. 33, pp. 919—924, 1997.
T. Suzuki, A. Chiba, “An air-gap—şux—oriented vector controller for stable operation of bearingless induction motors”, IEEE Transactions on Industry Applications, Vol. 36, pp. 1069—1076, 2000.
T. Hiromi, T. Katou. A. Chiba, “A novel magnetic suspension-force compensation in bearingless induction-motor drive with squirrel-cage rotor”, IEEE Transactions on Industry Applications, Vol. 43, pp. 66—76, 2007.
W.S. Bu, J .Y. Xiao, L. Yuan, “Induction compensation control of bearingless induction motor”, Proceedings of the IEEE ICMA, Vol. 1, pp. 944—949, 2011.
W.S. Bu, S.C. Zhang, S.M. Wan, “Hardware implement of numerical control system for bearingless induction motor”, Proceedings of the IEEE ICMA, Vol. 1, pp. 1934—1938, 2011.