___

Antony, J. (2014). Readiness factors for the lean six sigma journey in the higher education sector. International Journal of Productivity and Performance Management, 63(2), 257-264. http://dx.doi.org/10.1108/IJPPM-04-2013-0077/full/html

Azizi, A. (2015). Evaluation ımprovement of production productivity performance using statistical process control, overall equipment efficiency, and autonomous maintenance. Procedia Manufacturing, 2, 186–190. http://dx.doi.org/10.1016/j.promfg.2015.07.032

Benneyan, J. (1998). Use and interpretation of statistical quality control charts, International Journal for Quality in Health Care, 10(1), pp. 69-73. http://intqhc.oxfordjournals.org/content/10/1/69.full.pdf.

Boudreaux-Kelly, M., Wilson, M., & Bokhari, M. (2015). Statistical methods of risk-adjusted statistical process control charts to assess surgical performance in consecutive colorectal operations at a single institution. JAMA Surgery, 150 (3), 271-272, https://doi.org/10.1001/jamasurg.2014.1773

Cassady, R., Bowden, R., Liew, L. & Pohl, E. (2000). Combining preventive maintenance and statistical process control: a preliminary investigation. IIE Transactions, 32, 471-478, https://doi.org/10.1080/07408170008963924

Chen, Y. & Durango-Cohen, P. L. (2015). Development and field application of a multivariate statistical process control framework for health-monitoring of transportation infrastructure. Transportation Research Part B: Methodological, 81, 78– 102. http://dx.doi.org/10.1016/j.trb.2015.08.012

Davenport, DL., Bowe EA., Henderson, WG., Khuri, S.F. & Mentzer, RMJ. (2006). National surgical quality improvement program (NSQIP) risk factors can be used to validate American society of anesthesiologists physical status classification (ASA PS) levels. Annals of Surgery. 243(5), 636-644, https://doi.org/10.1097/01.sla.0000216508.95556.cc

De Boeck, E., Jacxsens, L., Bollaerts, M. & Vlerick, P. (2015). Food safety climate in food processing organizations: Development and validation of a self-assessment tool. Trends in Food Science & Technology, https://doi.org/10.1016/j.tifs.2015.09.006

Dutoit, C., Dehombreux, P., Lorphèvre, E. R. & Equeter, L. (2019). Statistical process control and maintenance policies for continuous production systems subjected to different failure ımpact models: literature review. Procedia CIRP, 86, 55– 60. https://doi.org/10.1016/j.procir.2020.01.050

Evans, J. (2008). Statistical process control for quality ımprovement: a training guide to caring spc, prentice hall, cincinnati, Pearson Technology Group; 1st Edition, 204 p., ISBN-13: 978- 0135589908 Fishbone diagram-Ishikawa cause and effect, https://whatis.techtarget.com/definition/fishbonediagram) (Access Date: 12.05.2020).

Gejdoš, P. (2015). Continuous quality ımprovement by statistical process control. Procedia Economics and Finance, 34, 565–572. https://doi.org/ 10.1016/s2212-5671(15)01669-x

Grigg, N. P. & Walls, L. (2007). Developing statistical thinking for performance improvement in the food industry. International Journal of Quality & Reliability Management, 24(4), 347-369. http://dx.doi.org/10.1108/02656710710740536

Harris T. J. & W. H. Ross. (1991). Statistical process control procedures for correlated observations. The Canadian Journal of Chemical Engineering, 69, 48-57.

Hawkins, D. M. and Zamba, K.D. (2003). On small shifts in quality control, Quality Engineering, 16, 143-149, https://doi.org/10.1081/QEN-120020780 Hdz – Jasso, A. M., Contreras – Valenzuela, M. R., Rodríguez – Martínez, A., Romero, R. J. &

Venegas, M. (2015). Experimental heat transformer monitoring based on linear modelling and statistical control process. Applied Thermal Engineering, 75, 1271– 1286. http://dx.doi.org/10.1016/j.applthermaleng.2014.09.013

Ho, C. & Case, K. E. (1994). Economic design of control charts: A literature review for 1981–1991. Journal of Quality Technology, 26, 39–53. https://doi.org/10.1080/00224065.1994.11979497

How a Cause & Effect Diagram Helped Reduce Defects by 19% https://goleansixsigma.com/achieving-a-19-improvement-in-response-time-using-a-causeand-effect-diagram/ (Access Date: 10.09.2020).

How to Do Pareto Chart Analysis, https://tallyfy.com/pareto-chart-analysis/, (Access Date: 10.09.2020).

Hu, K. & Yuan, J. (2008). Multivariate statistical process control based on multiway locality preserving projections. Journal of Process Control, 18(7-8), 797– 807. http://dx.doi.org/10.1016/j.jprocont.2007.11.002

Interpreting Control Charts, https://www.spcforexcel.com/knowledge/control-chart basics/interpreting-control-charts (Access Date: 10.09.2020).

Kano, M., Sakata, T. & Hasebe, S. (2011). Just-ın-time statistical process control: Adaptive monitoring of vinyl acetate monomer process. IFAC Proceedings Volumes, 44(1), 13157– 13162. http://dx.doi.org/10.3182/20110828-6-it-1002.01756

Kafetzopoulos, D. P., Gotzamani, K. D. & Psomas, E. L. (2014). The impact of employees’ attributes on the quality of food products, International Journal of Quality & Reliability Management, 31(5), 500-521. https://doi.org/10.1108/IJQRM-05-2012-0057

Kaskavelis, E., Martin, E. B., Morris, A. J. & Jonathan, P. (2000). On the statistical process control of multivariate autocorrelated processes. IFAC Proceedings, 33(10), 165– 170. https://doi.org/10.1016/s1474-6670(17)38536-1

Keller, D. S., Reif de Paula, T., Yu, G., Zhang, H., Al-Mazrou, A. & Kiran, R. P. (2019). Statistical process control (SPC) to drive improvement in length of stay after colorectal surgery. The American Journal of Surgery. https://doi.org/ 10.1016/j.amjsurg.2019.08.029

King, M. (2011). Process control: A practical approach, John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, United Kingdom, p.1-28, ISBN 978-0- 470-97587-9.

Kharbach, M., Cherrah, Y., Vander Heyden, Y., & Bouklouze, A. (2017). Multivariate statistical process control in product quality review assessment – A case study. Annales Pharmaceutiques Françaises, 75(6), 446–454, http://dx.doi.org/10.1016/j.pharma.2017.07.003

Kourti T. (2009). Multivariate statistical process control and process control, using latent variables. In: Brown SD, Tauler R, Walczak B, editors. Comprehensive chemometrics. Oxford: Elsevier; 2009. p. 21-54.

Kumar, R., Garg, D. & Garg, T.K. (2011), TQM success factors in north Indian manufacturing and service industries, The TQM Journal, 23(1), 36-46, https://doi.org/ 10.1108/17542731111097470

Lameei, A. (2005). Assessment of organization readiness for TQM implementation. Iranian Journal of Public Health, 34(2), 58-63.

Laursen, K., Frederiksen, S.S., Leuenhagen, C. & Bro, R. (2010) Chemometric quality control of chromatographic purity. Journal Chromatogr A, 1217, 6503—6510, http://dx.doi.org/10.1016/ j.chroma.2010.08.040

Levinson, W. A. (2011). Statistical process control for real-world applications, Taylor and Francis Group, LLC, p.1-56. ISBN 13: 978-1-4398-2001-8.

Lim, S. A. H. & Antony, J. (2016). Statistical process control readiness in the food industry: Development of a self-assessment tool. Trends in Food Science & Technology, 58, 133– 139. https://doi.org/10.1016/j.tifs.2016.10.025

Lim, S. A. H., Antony, J. & Albliwi, S. (2014). Statistical process control (SPC) in the food industry– A systematic review and future research agenda. Trends in food science & technology, 37(2), 137-151. http://dx.doi.org/10.1016/j.tifs.2014.03.010

Linderman, K., McKone-Sweet, K. E. & Anderson, J. C. (2005). An integrated systems approach to process control and maintenance. European Journal of Operation Research, 164, 324–340. https://doi.org/10.1016/j.ejor.2003.11.026

Matos, A. S., Requeijo, J. G. & Pereira, Z. L. (2008). Integration of engineering process control and statistical control in pulp and paper industry. 18th European Symposium on Computer Aided Process Engineering, 399–404. http://dx.doi.org/10.1016/s1570-7946(08)80071-5.

Maskin, E. & Sjöström, T. (2002). Implementation theory, Chapter 5, Handbook of social Choice and Welfare, 1, 237-288.

Mirko, S., Jelena, J., Zdravko, K. & Aleksandar, V.(2009). Basic quality tools in continuous ımprovement process. Journal of Mechanical Engineering, 55(5), 1-4.

Mehrafrooz, Z. & Noorossana, R. (2011). An integrated model based on statistical process control and maintenance, Computers and Industrial Engineering, 61(4), 1245– 1255. https://doi.org/10.1016/j.cie.2011.07.017

Montgomery D. C. & C. M. Mastrangelo. (1991). Some statistical process control procedures for autocorrelated data and discussion. Journal of Quality Technology, 23(3), 179-204.

Montgomery, D. C. (2001). Introduction to statistical quality control (fourth ed.). Wiley

Montgomery, D. C. (1980). Economic design of control charts: A review of literature survey. Journal of Quality Technology, 12, 40–43.

Montgomery, D. C. (2013). Introduction to statistical quality control, seventh edition, John Wiley & Sons, Inc, p.235-279, ISBN: 978-1-118-14681-1.

Oakland, J.S. (2008). Statistical process control, Sixth Edition p.1-20., p.90-159, ISBN–13: 978-0- 7506-6962-7.

Pignatiello, JJ. & Runger, GC.(1990). Comparisons of multivariate CUSUM charts. Journal of Quality Technology, 22, 173-186. https://doi.org/10.1080/00224065.1990.11979237

Psomas, E. & Fotopoulos, C. (2010), Total quality management practices and results in food companies. International Journal of Productivity and Performance Management. 59(7), pp. 668-687, https://doi.org/10.1108/17410401011075657

Porteus, E. L. & Angelus, A. (1997). Opportunities for improved statistical process control. Management Science, 43, 1214–1228. https://www.jstor.org/stable/2634634?seq=1&cid=pdf-reference.

Panagiotidou, S. & Nenes, G. (2009). An economically designed, integrated quality and maintenance model using an adaptive Shewhart chart. Reliability Engineering and System Safety, 94, 732– 741. https://doi.org/10.1016/j.ress.2008.07.003

Pinto, J. K. & Prescott, J. E. (1988). Variations in critical success factors over the stages in the project life cycle. Journal of management, 14(1), 5-18, https://doi.org/10.1177/014920638801400102

Radnor, Z. (2011). Implementing lean in health care: Making the link between the approach, readiness and sustainability. International Journal of Industrial Engineering and Management, 2(1), 1-12. http://www.ftn.uns.ac.rs/ijiem/.

Quality Improvement, https://qi.elft.nhs.uk/resource/cause-and-effect-diagram-fish-bone/ (Acces Date: 12.05.2020).

Raguram, R. (2014). Implementation of overall equipment effectiveness(OEE). Middle-EastJournal Science Research, 20(5), 567-576.

Ramírez, H., Mendoza, E., Mendoza, M. & González, E. (2015). Application of augmented reality in statistical process control, to ıncrement the productivity in manufacture. Procedia Computer Science, 75, 213–220. http://dx.doi.org/10.1016/j.procs.2015.12.240

Stapenhurst, T. (2005). Mastering statistical process control a handbook for performance ımprovement using cases, Elsevier Butterworth-Heinemann, 1-20, ISBN 0 7506 6529 7 p.1-10 /chart types 10-20.

Surak, J. G. (1999). Quality in commercial food process. Quality progress, February, 25-29.

Shamsuzzaman, M. and Wu, Z.(2006). Control chart design for minimizing the proportion of defective units. Journal of Manufacturing Systems, 25(4), 269-278.

Sánchez-Fernández, A,. Baldán, F. J., Sainz-Palmero, G. I., Benítez, J. M. & Fuente, M. J. (2018). Fault detection based on time series modeling and multivariate statistical process control. Chemometrics and Intelligent Laboratory Systems, https://doi.org/10.1016/j.chemolab.2018.08.003

Sedlack, JD. (2010). The utilization of six sigma and statistical process control techniques in surgical quality improvement. Journal for Healthcare Quality, 32, 18-26, https://doi.org/10.1111/j.1945-1474.2010.00102.x

Silva, A. F., Sarraguça, M. C., Fonteyne, M., Vercruysse, J., De Leersnyder, F., Vanhoorne, V. &

Lopes, J. A. (2017). Multivariate statistical process control of a continuous pharmaceutical twin-screw granulation and fluid bed drying process. International Journal of Pharmaceutics, 528(1-2), 242–252. https://doi.org/10.1016/j.ijpharm.2017.05.075

Sujová, A. & Marcineková, K. (2015). Modern methods of process management used in slovak enterprises. Procedia-Economics and Finance Journal, vol. 23/2015, Elsevier Ltd., 889 - 893. ISSN 2212-5671, https://doi.org/10.1016/S2212-5671(15)00381-0 Prístupné online: http://ac.elscdn.com/S2212567115003810/1-s2.0-S2212567115003810- main.pdf?_tid=f5abbcea-295b-11e5- 9d7c00000aacb362&acdnat=1436791244_e20038b90e4840c6597448c04b90d27d

Smith, I. (2005). Achieving readiness for organisational change. Library Management, 26(6/7), 408- 412, http://dx.doi.org/10.1108/01435120510623764

Spedding, T. A. & Chandrashekar, M. (2005). A component-based simulation environment for statistical process control systems analysis. Robotics and Computer-Integrated Manufacturing, 21(2), 99–107, http://dx.doi.org/10.1016/j.rcim.2002.11.001

Srikaeo, K., Furst, J. E., & Ashton, J. (2005). Characterization of wheat-based biscuit cooking process by statistical process control techniques. Food Control, 16(4), 309-317. http://dx.doi.org/ 10.1016/j.foodcont.2004.03.010

Thompson, J.R. & Koronacki, J. (2002), Statistical process control: the deming paradigm and beyond, Chapman and Hall/CRC, 2nd edition, ISBN: 1-58488-242-5.

Trietsch, D. (1998). Statistical quality control A loss minimization approach, World Scientific publishing Co. Pte Ltd., p.1-16, p.113-165, ISBN 9810230311.

Tsacle, E.G. & Aly, N. A. (1996). An expert system model for ımplementing statistical process control in the health care ındustry. Computers industry engineering, 1(1), 447-450.

Terek, M. & Hrnčiarová, Ľ. (2014). Štatistické riadenie kvality. Bratislava: IURA EDITION s.r.o. Bratislava 2004, 234s, ISBN 80-89047-97-1.

Teixeira, H. N., Lopes, I., Braga, A. C., Delgado, P. and Martins, C. (2019). Screwing process analysis using multivariate statistical process control. Procedia Manufacturing, 38, 932– 939. https://doi.org/10.1016/j.promfg.2020.01.176

Vetter, TR. & Morrice, D. (2019). Statistical process control: No hits, No runs, No errors. Anesthesia & Analgesia, 128, 374-382, https://doi.org/10.1213/ANE.0000000000003977

Wang, P., Zhang, D., LI, S., & Chen, B. (2012). Machining error control by ıntegrating multivariate statistical process control and stream of variations methodology. Chinese Journal of Aeronautics, 25(6), 937–947. http://dx.doi.org/10.1016/s1000-9361(11)60465-2.

Yin, H., Zhang, G., Zhu, H., Deng, Y. & He, F. (2015). An integrated model of statistical process control and maintenance based on the delayed monitoring. Reliability Engineering and System Safety, 133, 323–333. http://dx.doi.org/10.1016/j.ress.2014.09.020

Zhou, W. H. & Zhu, G. L. (2008). Economic design of integrated model of control chart and maintenance management. Mathematical and computer Modelling, 47, 1389–1395