An electrothermal current prediction method for overload protection of miniature circuit breakers

Abstract: Traditional miniature circuit breakers (MCBs) cannot meet the requirement for the intelligence of distributing apparatuses in a smart grid. The intellectualization of MCBs is restricted due to the lack of appropriate current measurement methods. Thus, an electrothermal current prediction method is proposed based on the derived relationship between root-mean-square (RMS) current and steady-state temperature rise. A fast acquisition algorithm is used to obtain the required temperature rise before thermal equilibrium to highly reduce the total time consumption. The presented prediction method is found immunized against the ambient temperature. The theory is validated with experiments using a thermostat. The tested steady-state accuracy and transient performance could meet the overload protection requirements without being affected by the environmental temperature

PDF

___

1] United States Department of Energy Office of Electric Transmission and Distribution. Grid 2030—A National Vision for Electricity Second 100 Years. Washington, DC, USA: United States Department of Energy, 2003.
[2] Forootani A, Afzalian AA, Ghomsheh AN. Model-based fault analysis of a high-voltage circuit breaker operating mechanism. Turkish Journal of Electrical Engineering & Computer Sciences 2017; 25: 2349–2362. doi: 10.3906/elk- 1508-73
[3] Feizifar B, Usta Ö. A new failure protection algorithm for circuit breakers using the power loss of switching arc incidents. Turkish Journal of Electrical Engineering & Computer Sciences 2019; 27: 1982–1997. doi: 10.3906/elk- 1805-84
[4] Qu JY, Wang Q, Zhang JM, Zhao H, Wu G et al. 3-D Transient finite-element analysis and experimental investi- gation of short-circuit dynamic stability for air circuit breaker. IEEE Transactions on Components, Packaging and Manufacturing Technology 2015; 5 (11): 1610-1617. doi: 10.1109/TCPMT.2015.2475300
[5] Hasan S. A hybrid circuit breaker based on current commutation approach for multi-feeder DC railway substations. CSEE Journal of Power and Energy Systems 2019; 5 (2): 234-239. doi: 10.17775/CSEEJPES.2017.00290
[6] Li XW, Wang YF, Wang Q, Qu JY, Liu HW. Experimental study on contact behavior of tilted contact in air circuit breaker. IEEE Transactions on Components, Packaging and Manufacturing Technology 2018; 8 (3): 343-349. doi: 10.1109/TCPMT.2017.2752299
[7] Aronstein J. Temperature sensitivity of residential molded case circuit breakers. IEEE Access 2019; 7: 38714–38720. doi: 10.1109/ACCESS.2019.2906198 [8] Aronstein J, Carrier DW. Molded case circuit breakers - some holes in the electrical safety net. IEEE Access 2018; 6: 10062–10068. doi: 10.1109/ACCESS.2018.2803298
[9] Abbasghorbani M, Mashhadi HR, Damchi Y. Reliability-centred maintenance for circuit breakers in transmission networks. IET Generation, Transmission & Distribution 2014; 8 (9): 1583–1590. doi: 10.1049/iet-gtd.2013.0530
[10] Qu JY, Wang Q, Liu ZW, Zhao H, Li XW. Influences of closing phase angle and frequency on electrodynamic stability of air circuit breaker. IEEE Transactions on Components, Packaging and Manufacturing Technology 2016; 6 (2): 249–255. doi: 10.1109/TCPMT.2015.2511180
[11] Melecio JI, Ahuett-Garza H. Design, analysis, and testing of a new microcircuit breaker thermal trip unit concept based on compliant mechanisms. IEEE Transactions on Components, Packaging and Manufacturing Technology 2015; 51 (4): 2862–2873. doi: 10.1109/TIA.2015.2397175
[12] Sun CH, Wen YM, Li P, Ye WS, Yang J et al. Self-contained wireless hall current sensor applied for two-wire zip-cords. IEEE Transactions on Magnetics 2016; 52 (7): 8600204. doi: 10.1109/TMAG.2016.2524671
[13] Han JC, Hu J, Ouyang Y, Wang SX, He JL. Hysteretic modeling of output characteristics of giant magnetoresistive current sensors. IEEE Transactions on Industrial Electronics 2015; 62 (1): 516-524. doi: 10.1109/TIE.2014.2326989
[14] Yang XG, Guo W, Li CC, Zhu B, Chen TG et al. Design optimization of a fluxgate current sensor with low inter- ference. IEEE Transactions on Applied Superconductivity 2016; 26 (4): 9001205. doi: 10.1109/TASC.2016.2536619
[15] Wu ZY. A wide linearity range current sensor based on piezoelectric effect. IEEE Sensors Journal 2017; 17 (11): 9001205. doi: 10.1109/JSEN.2017.2692258
[16] Weiss R, Itzke A, Reitenspieß J, Hoffmann I, Weigel R. A novel closed loop current sensor based on a circular array of magnetic field sensors. IEEE Sensors Journal 2019; 19 (7): 2517-2524. doi: 10.1109/JSEN.2018.2887302
[17] Abd Azzis AZH, Nor NM, Ibrahim T. Automated electrical protection system for domestic application. In: IEEE 7th International Power Engineering and Optimization Conference; Langkawi, Malaysia; 2013. pp. 23-28.
[18] Yuan YH, Wu F. Short-circuit current analysis for DFIG wind farm considering the action of a crowbar. Energies 2018; 11 (2): 425. doi: 10.3390/en11020425
19] Yang WP, Zhang H, Li JG, Zhang AM, Zhou YH et al. PIDR sliding mode current control with online inductance estimator for VSC-MVDC system converter stations under unbalanced grid voltage conditions. Energies 2018; 11 (10): 2599. doi: 10.3390/en11102599
[20] Li CY, Zhao CY, Xu JZ, Ji YK, Zhang F et al. A pole-to-pole short-circuit fault current calculation method for DC grids. IEEE Transactions on Power Systems 2017; 32 (6): 4943-4953. doi: 10.1109/TPWRS.2017.2682110
[21] Castro LM, Guillen D, Trillaud F. On short-circuit current calculations including superconducting fault current lim- iters (ScFCLs). IEEE Transactions on Power Delivery 2018; 33 (5): 4943-4953. doi: 10.1109/TPWRD.2018.2800732
[22] Frei PU, Weichert HO. Advanced thermal simulation of a circuit breaker. In: Proceedings of the 50th IEEE Holm Conference on Electrical Contacts and the 22nd International Conference on Electrical Contacts; Seattle, WA, USA; 2004. pp. 104-110.