Qiu HUA Luan QİAOLİ Fu YU HUA, Luan QİAOLİ, Fu YU YE

GİRDAP DÜZESİNİN GEOMETRİK ŞEKİLLERİNİN PERFORMANSA ETKİSİ

EFFECTS OF GEOMETRY ON THE PERFORMANCE OF SWIRL NOZZLE

Placing a swirl nozzle composed of a yarn channel and an air-jet nozzle in a traditional ring spinning frame can reduce yarn hairiness. In this study, two types of swirl nozzles, namely, the circular swirl nozzle and the elliptical swirl nozzle, are designed to optimize the inside structure of the swirl nozzle and improve the yarn quality. Yarn performance is evaluated based on the hairiness, breaking strength, and evenness of the yarn. Experimental results show that the two types of swirl nozzles have effective effects on the ring yarn qualities compared with the traditional method. The mechanisms of the said effects can be explained via yarn de-twisting and re-twisting under the vortex action in the yarn channel. Yarn channels have different effects on yarn properties because of their different airflow patterns. The circular swirl nozzle is found to produce better yarn properties, including S3 value (the total number of hairiness equal to or exceeding 3 mm per 10 m), breaking strength, and evenness than the elliptical swirl nozzle under similar processing parameters

Keywords:

Swirl nozzle, hairiness yarn channel, cross-sectional shape, ring spinning,

PDF

___

1. Yilmaz, D., Usal, M.R., 2011, "A comparison of compact-jet, compact, and conventional ring-spun yarns", Text Res J, vol: 81(5), pp: 459-470.
2. Kumar, M.R., Parthiban, M., 2007, "Lubricated ring's effect on yarn quality hairiness, Indian Textile Journal, vol: 118(2), pp: 33-35.
3. Jackowski, T., Cyniak, D., Czekalski, J., 2004, "Compact cotton yarn", Fibres Text East Eur, vol: 12(4), pp: 22-26.
4. Nejad, A.S., Najar, S.S., Hasani, H., 2011, "Application of air-jet nozzle in short staple Siro spinning system", The Journal of the Textile Institute, vol: 102(1), pp. 14-18.
5. Wang, X.; Chang, L., 2003, "Reducing Yarn Hairiness with a Modified Yarn Path in Worsted Ring Spinning", Text Res J, vol: 73(4), pp: 327-332.
6. Wang, X., Miao,M., 1997, "Studies of JetRing Spinning Part 1:Reducing Yarn hairiness with the Jetring", Textile Res. J, vol:67(4), pp: 253-258.
7. Rengasamy, R.S., Kothari, V.K., Patnaik, A., Bhatia, S.K., 2006, " Hairiness reduction in polyester spun yarns during ring spinning using air nozzles - Optimization of nozzle and other parameters", Indian J Fiber Text, vol:31(4) pp: 521-528.
8. Patnaik, A., Rengasamy, R.S., Kothari, V.K., Ghosh, A., Punekar, H., Limited,F., 2005, "Hairiness Reduction of Yarns by Nozzles at Ring Spinning: Airflow Stimulation Approach", Journal of Textile and Apparel, vol:4(4), pp: 1-11.
9. Qiu, H., Zhang, Y., Xu, Z., Ge, M., 2012, “A novel method to reduce hairiness level of ring spun yarn Fibers and Polymers", vol: 13(1), pp: 104-109.
10. Qiu, H., Iemoto, Y., Tanoue, S., 2007, “Effects of Cross-sectional Shape of Yarn Duct of Interlacer on the Properties of Interlaced Yarn",Journal of Textile Engineering, vol.53(1), pp: 1-8.
11. Qiu, H., Iemoto, Y., Tanoue, S., 2007, "Yarn Motion in Interlacers with Various Cross-sectional Shapes of Yarn Duct", Journal of Textile Engineering, vol: 53(2), pp: 59-67.