Civatalı bağlantıların eleman direngenliğin sonlu elemanlar yöntemi ve yapay sinir ağları ile belirlenmesi

Bu çalışmada, civatalı bağlantıların eleman direngenliği, Sonlu Elemanlar Yöntemi ve Yapay Sinir Ağları Sistemi ile belirlenmiştir. Farklı malzemeler ve farklı eleman kalınlıkları için Sonlu Elemanlar Yönteminde bir çok analiz yapılmıştır. Analiz sonuçları bir veri dosyasında toplanmıştır. Bu veri dosyası yapay Sinir Ağları Sistemi tarafından öğrenilmiştir. Böylece tasarım parametrelerine bağlı olarak eleman direngenliği belirlenmiştir. Visual Basic programlama dilinde bir program hazırlanmıştır.

Determination of member stiffness of bolted joints using finite element method and artificial neural network system

In this study, member stiffness of bolted joints determined using finite element method (FEM) and Artificial Neural Network System (ANNS). Many analysis have been conducted for different materials and thicknesses using FEM. Analysis results have been collected in a data file. This data file have been used training of ANNS. Thus, according to design parameters member stiffness of bolted joints have been determined. A program has been prepared in Visual Basic Language.

PDF

___

1.Lehnhoff, T.F. et al, "Member stiffness and bolt spacing of bolted joints", Winter Ann. Meet.,Anaheim, PVP Vol. 248, ASME, 63-72, (1992)

2.Güzeliş, C., "Genelleştirilmiş Hücresel Yapay Sinir Ağları", Elektrik Mühendisliği 5. Ulusal Kongresi, Trabzon, 7-12, (1993)

3.Rötscher, F., "Die machinelemente ", Verlag, Berlin, 1-30, (1927)

4.Frische, G.," Grundlegen einer genaueren Berechnung statisch und dynamisch beanspruchter Schraubenverbindungen", Dissartation , Berlin, TU, (1962)

5.Stuck.,K.,"Untersuchungen ueber dis federeigenschaften der verspannten teile von schraubenverbindungen", Dissertation, Aachen, (1968)

6.Motosh, N., "Determination of joint stiffness m bolted connections", Journal of Engineering for Industry, Transactions of the ASME, 98(3): 858-861, (1976)

7.Ito, Y., Toyoda, J., Nagata, S., "Interface pressure distribution in a bolt-fiange assebly", ASME, 77-Wa/DE-11,(1977)

8.Shigley, J. E., Misckhe, C. R., "Bolted Joint", Mechanical engineering design", McGraw Hill Inc,New-York, 250-270, (1989)

9.Shigley, J. E., Mitchell, L. D., "Bolted Joint", Mechanical engineering design, McGraw Hill Inc, New-York, 230-240, (1983)

10.Lehnhoff, Terry F., Bunyard, B. A.,"Bolt thread and head fillet stress concentration factors", Journal of Pressure Vessel Technology, Transactions of the ASME, 122( 2): 180-185, (2000)

11.Lehnhoff, T.F., Ko, Kwang, I.I., McKay, M.L. " Member stiffness and contact pressure distribution of bolted joints": Journal of Mechanical Design, Transactions of the ASME, 116(2):550-557, (1994)

12.Lehnhoff, T.F.,Wistehuff, W.E.,"Nonlinear effects on the stresses and deformations of bolted joints",Journal of Pressur Vessel Technology, Transactions of the ASME, 118(1): 48-53,(1996)

13.Lehnhoff, T.F., McKay, M. L., Bellora, V. A, "Member stiffness and bolt spacing of bolted joints",American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication)PVP, Recent Advances in Structural Mechanics - 1992, 248: 63-72, (1992)

14.Lehnhoff, T.F., Ko, Kwang,I.I, McKay, M. L."Member stiffness and contact pressure distribution of bolted joins", American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, Reliability, Stress Analysis, and Failure Prevention, 55:161-177, (1993)

15.Lehnhoff, T., Wistehuff, W.E "Nonlinear effects on the stiffness of bolted joints", American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVPPressure Vessels,Pumps, Valves, Pipe Supports and Components, 282:125-130,(1994)

16.Lehnhoff, T. F, Bunyard, B. A. "Effects of bolt threads on the stiffness of bolted joints", American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Recent Advances in Solids and Structures, 381:41-146, (1998)

17.Wileman, J., Choudhury, M., Green, I., "Computation of member stiffness in bolted vonnections",Computers in Engineering 1990, 539-544, (1990)

18.Wileman, J., Choudhury, M., Green, I "Computation of member stiffness in bolted connections",Journal of Mechanical Design, 113(n): 432-437, (1991)

19.Akkurt, M., "Civata bağlantıları", Makina elemanları", Birsen Kitabevi,. 286-376, Cilt 1, Istanbul,(1986)

20.Filiz, İ.,H., Akbolat, A., Güzelbey, İ. H.," Stiffness of bolted members", Turkish Journal of Engineering and Environmental Sciences, TÜBİTAK, 20: 273-279 (1996)

21.Dimarogonas, A., "Bolted Joint",Computer aided machine design, Prentice Hall International, New-York, 322-344, (1989)

22.Litttle, R. E., " Bolted joints: how much give ?", Machine Design , 338-339 (1967)

23.Osgood, C.C., "Saving weight on bolted joints", Machine Design, 172- 186 (1979)