International Advanced Researches and Engineering Journal
- Investigating the influence of shielding gas stability of laser polished Ti-6Al-4V alloy using image processing
- Graphene-based stand-alone nanomechanical membrane production and mass-acoustic hybrid-sensor application
- Major depressive disorder diagnosis from electroencephalogram data and potential treatment with dimethyltryptamine
- The promoter effect of laminin-derived IKVAV peptide on three dimensional HUVEC microtissue
- Non-parametric analysis of maintenance data for Attitude Indicator of a commercial aircraft fleet
- Determination and monitoring of tetracycline and degradation products in livestock slaughterhouse wastewater treatment plant effluent
- Thermal stability and degradation kinetics of the phenolics of Trigonella-foenum graecum L. leaf extracts
- The effect of communication on construction project management processes during the covid-19 pandemic period: a case study in Türkiye
- A real-time accurate positioning system using BLE and wireless mesh network in a shipyard environment
- Research on the success of unsupervised learning algorithms in indoor location prediction
- Heat transfer system and feedback temperature controller design for safety process operation of phosphorous acid potassium salts production
- Hydroxyapatite coating processes with EPD method and investigation of mechanical properties of coatings
- Non-linear displacement and deformation damage limits of reinforced concrete circular columns by analytical observations according to TBSC 2018
- Structural evolution of mechanically alloyed ODS steel powders during ball milling and subsequent annealing treatment
- Predicting acceptance of the bank loan offers by using support vector machines
- Post curing temperature effect on mechanical characterization of jute/basalt fiber reinforced hybrid composites
- A study on the renewable energy potential of incineration of municipal solid wastes produced in Izmir province
- Examining the hydrophobic properties of electrospun oxide-induced polystyrene nanofibers for application in oil-water separation
- A Mixed-Integer Linear Programming approach for university timetabling problem with the multi-section courses: an application for Hacettepe University Department of Business Administration
- Effect of pattern on air permeability, mechanical resistance and thickness of wovens
- Thermoeconomic analysis of a geothermal and solar assisted combined organic Rankine and absorption cycle
- Job shop scheduling with genetic algorithm-based hyperheuristic approach
- Implementation and evaluation of a comprehensive Li-Fi system using Matlab/Simulink
- Reduction of operation temperature in SOFCs utilizing perovskites: Review
- A novel approach for prediction of daily streamflow discharge data using correlation based feature selection and random forest method
- Wearable sensor device for posture monitoring and analysis during daily activities: A preliminary study
- Analyzing the effect of the Covid-19 pandemic on the water consumption of households, workplaces, and public institutions in Kocaeli, Turkey
- Detection of circuit components on hand-drawn circuit images by using fasterR-CNN method
- Knockdown factors for cylindrical shells caused by torsional Mode-I type geometric imperfections under axial compression
- Analysis of Spatio-temporal rainfall trends and rainfall variability in Botswana between 1958 and 2019
- The production of open cell Ni-foam using KBr as spacer and oxidation shield via powder metallurgy technique
- Investigation of the availability of a new point load test device in characterization of rocks
- An automated Covid-19 respiratory sound classification method based on novel local symmetric Euclidean distance pattern and ReliefF iterative MRMR feature selector
- Explicit dynamics finite element analyses of asymmetrical roll bending process
- Dimensional optimization of two-phase flow boiling in microchannel heat sinks
- Prediction of cutting temperature in carbide cutting tool using finite element method
- Structural analysis of embedded hollow tubes on straight and curved platforms under thermal loads
- Medical images fusion using two-stage combined model DWT and DCT
- Design and implementation of FPGA-based arrhythmic ECG signals using VHDL for biomedical calibration applications
- Investigating the construction parameters of deep mixing columns in silty soils
- LUPU-Net: a new improvement proposal for encoder-decoder architecture
- Investigation of proper material selection for rainwater harvesting in squares having higher urban heat island effect potential: KBU Social Life Center example
- Empirical and theoretical analysis of a modified isochronal test in a caspian region gas reservoir
- Determination of mechanical performance of glass fiber reinforced and elastomer filled polyamide 6 composites
- Harmonic response analysis of elliptically curved thin plates
- Investigation of the temperature effect on the mechanical properties of 3D printed composites
- A novel formula derived by using ABC algorithm for calculation of the average fiber diameter of electrospun poly (Ԑ-caprolactone) scaffolds
- A survey: blockchain utilization for securing healthcare system
- A new region-of-interest (ROI) detection method using the chan-vese algorithm for lung nodule classification
- Application of the Muskingum-Cunge routing method with variable parameters in a gauged creek reach
- Prediction of market-clearing price using neural networks based methods and boosting algorithms
- Proposed new equations for calculation of thermophysical properties of nanofluids
- Determination of the effect of artificial aging parameters on dry sliding wear resistance of 6013 aluminum alloy (Al-Mg-Si-Cu)
- Mathematical modeling and production of semi-active hand prosthesis from clear resin
- Analysis and modified function projective synchronization of integer and fractional-order autonomous Morse jerk oscillator
- Review of machine learning and deep learning models in agriculture
- Water absorption parameters of glass/epoxy composites based on dimension effect
- Investigation of friction performance and surface integrity of cryogenically treated AISI 430 ferritic stainless steel
- Dynamics of axially functionally graded pipes conveying fluid using a higher order shear deformation theory
- A GIS-based technique analysis of land use and land cover change detection in taluka Mirpur Mathelo: A case study in district Ghotki, Pakistan
- A numerical study of the natural convection of Al2O3-EG nanofluid in a square enclosure and impacts and a comparison of various viscosity and thermal conductivity models
- Vibration reduction on a cantilever Timoshenko beam control subjected to combined effects of wind and earthquake loads using damped outriggers
- Chemical characterization of waste tire pyrolysis products
- Experimental investigation of the effects of different refrigerants used in the refrigeration system on compressor vibrations and noise
- A comparative study on appliance recognition with power parameters by using machine learning algorithms
- Numerical assessment of the performance of different constitutive models used to predict liquefiable soil behavior
- Comparison of the effect of foundation analysis methods on structural analysis results of tall buildings
- Comparison of conventional high speed railway, maglev and hyperloop transportation systems
- Analysis and balancing of assembly line in a machine molding factory
- Finite difference method for electric field optimization in high voltage power transformer bushings using engineering simulation and 3D design program
- Silicon dioxide thin films prepared by spin coating for the application of solar cells
- Recombinant production of Thermus aquaticus single-strand binding protein for usage as PCR enhancer
- Experimental investigation and numerical verification of Coanda effect on curved surfaces using co-flow thrust vectoring
- Analysis of whether news on the Internet is real or fake by using deep learning methods and the TF-IDF algorithm
- Dose response of gluconic acid doped Fricke gels irradiated with X-rays
- An investigation on the flexural behaviour of RC beams wrapped with CFRP
- Modelling of cutting parameters for Nilo 36 superalloy with machine learning methods and developing an interactive interface
- Effect of aperture averaging on four petal Gaussian beams in atmospheric turbulence
- Selective harmonic elimination in multi-level inverters by using neural networks
- Water cooled PV panel efficiency in Osmaniye environment
- Mechanical characterization of pack-boronized AISI 4140 and AISI H13 steels
- GMDH-type neural network-based monthly electricity demand forecasting of Turkey
- An analysis of content-based image retrieval
- CCII current conveyor and dormand-prince-based chaotic oscillator designs for secure communication applications
- PAPR reduction using selective mapping scheme in universal filtered multicarrier waveform
- Performing reactive power compensation of three-phase induction motor by using parallel active power filter
- The comparative study of conventional and ultra-high frequency induction sintering behavior of pure aluminum
- Effect of spring mid-support condition on the vibrations of the axially moving string
- Design of polyrod antenna having isoflux radiation characteristic for satellite communication systems
- Estimation of consistency limits of fine-grained soils via regression analysis: A special case for high and very high plastic clayey soils in Istanbul
- Nonlinear vibration and dynamic response of nano composite conical tube by conveying fluid flow
- Toggling effect on pullout performance of pedicle screws: Review
- Liquid level control with different control methods based on Matlab/Simulink and Arduino for the control systems lesson
- Turkish sign language digits classification with CNN using different optimizers
- Analysis of parameter changes of a neuronal network model using transfer entropy
- Thermodynamic performance analysis of geothermal and solar energy assisted power generation and residential cooling system
- Correction to: An experimental study on production of intelligent textile by using ionochromic materials
- The effect of different sliding speeds on wear behavior of ZrO2 reinforcement aluminium matrix composite materials
- Determination of the distribution of different filling materials in SBR matrix compounds by image processing
- Electronic and mechanical design of a hexapod land searching robot
- Application of reverse engineering approach on a damaged mechanical part
- Band-stop filter design based on split ring resonators loaded on the microstrip transmission line for GSM-900 and 2.4 GHz ISM band
- Estimation of PM10 concentrations in Turkey based on Bayesian maximum entropy
- Taguchi method for investigation of the effect of TBC coatings on NiCr bond-coated diesel engine on exhaust gas emissions
- Layer-by-layer growth of molecular self-assembled monolayers /sputtered gold thin films/graphene oxide on glass substrate
- Determination of optimal PID control parameters by response surface methodology
- Investigation of nonlinear behavior of high ductility reinforced concrete shear walls
- A novel design of a compact wideband patch antenna for sub-6 GHz fifth-generation mobile systems
- Removal of Maxilon Red GRL dye in continuous system adsorption column using waste pine sawdust
- Effect of polymer and surfactant concentrations on PVP nanofibers morphology
- The effects of the use of acetylene gas as an alternative fuel in a gasoline engine
- Numerical analysis of the harvester having toroidal structure and examination of the application results
- Increasing the thermal performance of cooling tower by utilizing swirling jets
- Investigation of plastic zone dimension in front of an external semi-elliptic crack on pipe of molecular bushing
- The investigation of effect of the ceramic coatings with bond-layer coated on piston and valve surface on engine performance of a diesel engine
- Numerical and experimental study on thermal characteristics of louvered fin microchannel air preheaters
- Use of various plant extracts to provide hygiene in mattresses and antibacterial film production
- Convective hot air drying characteristics of selected vegetables
- Removal of Acid Orange 74 from wastewater with TiO2 nanoparticle
- Investigation of mechanical and microstructural performance of alkali activated electrical arc furnace slag mortars
- Biosynthesis and characterization of iron oxide nanoparticles from Enteromorpha spp. extract: determination of adsorbent properties for copper (II) ions
- Determination of highly effective attributes in fold level classification of proteins
- The evaluation on the effect of effective and repetitive vibration to compressive strength with the fuzzy method
- Evaluation of some agronomical characteristics and essential oil ratio of coriander (Coriandrum sativum L.) cultivars cultivated by applying different humic acid doses
- Comparison of contamination on yarns produced from local and us blend cotton types
- The effect of dairy cow feeding regime on functional milk production
- Production of red fluorescent protein (mCherry) in an inducible E. coli expression system in a bioreactor, purification and characterization
- Resource based view in the Turkish construction sector and resource selection with ANP technique
- Influence of fabrication temperature on the structural features of chitosan gels for tissue engineering applications
- On the equivalent ZIP parameter extraction of desktop computer cases and LCD monitors connected in parallel
- Using of recycling materials in the construction sector
- Investigation on the corrosion resistances of bronze-waste tire-concrete composites
- Constrained model predictive control for the quadruple-tank process
- TEM characterization and synthesis of nanoparticle B4C by high-energy milling
- Misalignment fault detection by wavelet analysis of vibration signals
- A review study on ladle slag detection technologies in continuous casting process
- PAPR reduction performance of bat algorithm in OFDM systems
- An experimental study on production of intelligent textile by using ionocromic materials
- Electrophoretic characterization of inbred maize lines
- Synthesis and stability analysis of folic acid-graphene oxide nanoparticles for drug delivery and targeted cancer therapies
- Performance analysis of SRF-PLL and DDSRF-PLL algorithms for grid interactive inverters
- Experimental investigation of the effect of compression pressure on mechanical properties in glass fiber reinforced organic material-based brake pads production
- Optimization of assignment problems in production lines with different skilled labor levels
- Experimental investigation of thermal coefficient of the graphene used concrete
- Determination of heat transfer coefficient and electromagnetic directional analysis of pomegranate seed
- Production of bioplastic from potato peel waste and investigation of its biodegradability
- Effects of pretreatments on the production of biogas from cow manure
- Designing autopilot system for fixed-wing flight mode of a tilt-rotor UAV in a virtual environment: X-Plane
- Feedback-based IKP solution with SMC for robotic manipulators: the SCARA example
- A review on the effects of micro-nano particle size and volume fraction on microstructure and mechanical properties of metal matrix composites manufactured via mechanical alloying
- Ab-initio calculations of structural, optical and electronic properties of AgBiS2
- Investigation of usage potentials of global energy systems
- A different method of using nitrogen in agriculture; Anhydrous ammonia
- Effect of Cu addition on microstructure and mechanical properties of NiTi based shape memory alloy
- Co-application of EDDS and ZnO nanoparticles with TiO2Ag nanoparticles on rye
- Numerical investigation of combined effect of nanofluids and impinging jets on heated surface
- Treatment of fruit juice concentrate wastewater by electrocoagulation: Optimization of COD removal
- Electricity pricing algorithm based on resource type and nodal approach
- Investigation on limitation of reduced relative storey drifts according to TEC
- On the effect of nano particle inclusion in fiber reinforced composite tensile and flexural behavior
- Calculation of the diffusion lengths for one-speed neutrons in a slab with forward and backward scattering
- A comparative study of raspberry dehydration by lyophilisation or conventional drying
- Evaluation of crosslinking type and antibacterial activities of copper oxide loaded cotton textile fabrics
- Investigation of the usability to nut shell ash as a mineral additive in concrete
- Mersin province water projections and water information and management system: Erdemli district model
- Effect of functional group distribution on combustion characteristics of chars from Afsin Elbistan lignite and RDF
- Prediction of calorific value of biomass based on elemental analysis
- Biosynthesis and characterization of CaCO3 nanoparticles from the leach solution and the aqueous extract of Myrtus communis plant
- An approach to preparing a bill of quantities
- Aspergillus niger may improve nutritional quality of grape seed and its usability in animal nutrition through solid-state fermentation
- Design and implementation of the FPGA-based chaotic van der pol oscillator
- Design study with height adjustable washbasin
- Broadband Wilkinson power divider based on chebyshev impedance transform method
- Two countries at same parellel in solar energy productions: USA and Turkey
- An implementation of chaotic circuits with Multisim-LabVIEW
- Seismic performance of steel moment frames with variable friction pendulum systems under real ground motions
- Environmental effects on tribological behaviour of composite materials
- The shortest path detection for unmanned aerial vehicles via genetic algorithm on aerial imaging of agricultural lands
- Investigation on limitation of reduced relative storey drifts according to TEC 2007
- Transportation policies in increasing traffic safety
- Investigation of using waste banana peels in EPDM as bio-based filler
- Selection of optimal numerical method for implementation of Lorenz Chaotic system on FPGA
- Projected potential of Landfill gas in Çukurova region
- Prioritization of high-speed rail projects
- Investigation of using shelf-life passed milk in EPDM as bio-based filler
- Actions to be taken to prevent negative consequences in the workplace during emergencies
- Transportation planning with analytic hierarchy process and goal programming
- Use of solar panels in greenhouse soil disinfection
- Examination of the obesogenic effects of Bisphenol-A
- An investigation on auxetic feature and its applications
- Examining absorbency properties of the pile loop knitted fabrics with moisture management tester
- Forecasting operation times by using Artificial Intelligence
- Effective relative storey drift limits in flexible jointed infill wall applications
- Dosimetric fricke gel systems improved with CaCl2 and gluconic acid
- Design and production of a fixed anode x-ray tube
- Examining the risk of flotation in structures
- An Artificial Neural Network Approach for the prediction of Water-Based Drilling Fluid Rheological Behaviour
- Investigating the causes of delay and cost-overrun in construction industry
- Biosensors from the first generation to nano-biosensors
- The effect on hardness and density of filling materials in NR/SBR rubber compounds
- Investigation of hydrogen production cost by geothermal energy
- Investigation of hybrid electric vehicle control systems
- Exterior surface insulated panel radiator and energy efficiency analysis
- Material Requirement Planning in a Briquette Factory
- Yayın Aralığı: Yılda 3 Sayı
- Başlangıç: 2017
- Yayıncı: Dr. Ceyhun YILMAZ
13.9b 4.6b