EN
EN
Dergiler
Duyurular
İstatistikler
Standartlar
Hakkımızda
İletişim
European Mechanical Science
Arşiv
European Mechanical Science
2023
Cilt: 7 Sayı : 4
Investigating the biomechanics of the biceps brachii muscle during dumbbell curl exercise: A comprehensive approach
Investigation of alternative vehicle applications for reducing greenhouse gas emissions in urban public transport: The case of Adana province
Metaheuristic algorithm-based cascade PID controller design for fixed wing unmanned aerial vehicle
Effect of nano hybrid additives on low velocity impact responses of aramid composite plates: example of CNT and ZrO2
Single-pulse MIG welded Perform 700 steel joints with various welding parameters
Baby cry-sensitive armband design for parents with hearing loss
Determination of effects of some alcohol blends on performance, emission, mechanical vibration and noise in diesel engines
Stress concentration factor based design curves for cylinder-cylinder connections in pressure vessels
Optimizing printing parameters for enhanced mechanical properties of 3D printed PLA octet lattice structures
Structural and topology optimization of steel construction profiles in solar energy systems
Investigation of the velocity, mach number, and turbulent parameters for different projectile rear geometry
2022
Cilt: 6 - Sayı : 2
Evaluating the effectiveness of combined hardening models to determine the behavior of a plate with a hole under combined loadings
A numerical approach in the investigation of the effects of diethyl ether and ethanol mixtures on combustion characteristics and NO emissions in a DI diesel engine
Finite element analysis of the seepage problem in the dam body and foundation based on the Galerkin’s approach
Web based remote agricultural control and consultancy application: An early diagnostic warning system
Assessing household damages using multi-model deep learning pipeline
Application of rotational accelerometers on the measurement of automotive headlamp cut-off deviation
FEA analysis and optical measurement of city bus composite floor structure
Deflection analysis of functionally graded equal strength beams
Numerical simulation of a magnetic induction coil for heat treatment of an AISI 4340 gear
Analytical investigation of a new approach to calculation for effective length of the rolling element used in closed end needle roller bearings of driveshaft
Cilt: 6 - Sayı : 1
Optimization of process parameters of medium carbon steel joints joined by MIG welding using Taguchi method
Solar assisted heat pump modelling
A mechanical model and stress-strain response of the biceps brachii under static load
Assessment of binary metallic-based nanoparticles addition effects on performance, emission, and vibration behaviors of a diesel engine
Surface pressure effect on rivet-connected l-corner plates exposed to axial and flexural loadings
Production and mechanical characterization of polyethylene matrix composites with the addition of linen and cotton waste fabric filler materials
Effect of repair parameters on composite plates under low velocity impact
Influence of ecological Juniperus Drupacea cone powder on mechanical and physical properties of fiber-reinforced composite friction materials
Evaluation of fracture toughness and Charpy V-notch test correlations for selected Al alloys
Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel
Cilt: 6 - Sayı : 3
Estimation of three-point bending behavior using finite element method for 3D-printed polymeric sandwich structures with honeycomb and reentrant core
Thermo-hydraulic performance investigation of a heat exchanger tube inserted with twisted tapes modified with various twist ratio and alternate axis
Computer aided numerical damage analysis of the axle shaft
Validation of A356T6 automobile wheel fatigue strength using the finite elements method
Analysis of different methods of suppressing generator noise reaching indoor noise
Comparison of pure-hydrogen production performances of blast furnace slag, and metal powders in sodium borohydride hydrolysis reaction
2021
Cilt: 5 - Sayı : 3
Electromagnetic Analysis of Organic Waste and Blust Furnace Slag Mixtures
Characterization of Mechanical of CTBN Liquid Rubber‐Modified Epoxy Cured by Anhydride- and Amine-Based Agent
Estimating Global Solar Radiation from Empirical Models: An Application
High Voltage Gain Multi-port Bidirectional DC-DC Converter with an Effective Multi-loop Control Strategy for PV/Battery Integrated Systems
Effect of Fabric Structural Parameters on Various Comfort Properties of Automobile Seat Cover Fabrics
Effect of Build Orientation on Mechanical Behaviour and Build Time of FDM 3D-Printed PLA Parts: An Experimental Investigation
Fracture Analysis of Case Hardening in Kingpins Parts
A preliminary Investigation of Surface Micro Modification Effects on the Biocompatibility of 316L Stainless Steel
Static Analysis of Trailers with Demountable Chassis
Cilt: 5 - Sayı : 4
Numerical Investigation of Fatigue Behavior of Non-patched and Patched Aluminum/Composite Plates
Design and Manufacturing of a Pneumatic Driven Compression Spring Fatigue Machine
Investigation of the Influence of Cold-Treatment on Properties of Advanced High Strength Automotive Steels
A Battery Powered on-Chip Peristaltic Pump for Lab-On-A-Chip Applications
Efficiency of the Gaver-Stehfest Method Transient Response of a Spiral Fin
Some New Approximate Solutions in Closed-Form to Problems of Nanobars
Finite Element Simulation of Dent Resistance For Automotive Rear Bumper
Research of Effect on Gasoline-2-Propanol Blends on Exhaust Emission of Gasoline Engine with Direct Injection Using Taguchi Approach
An Experimental Investigation of the Flow Structure on a Face Mannequin With / Without a Face Shield
Hybrid Taguchi Based Grey Algorithm for Multi Objective Optimization of Gas Metal Arc Welded DP1000 Steel
Research of Effect on Gasoline-2-Propanol Blends on Exhaust Emission of Gasoline Engine with Direct Enjection Using Taguchi Approach
The Efficiency of The Gaver-Stehfest Method Transient Response of A Spiral Fin
Cilt: 5 - Sayı : 1
Conceptual Design of Fuel Cell Based Hybrid Unmanned Air Vehicle
Design and Thermal Analysis of High Power LED Light
Numerical Study on Solidification of Phase Change Materials Embedded with Metal Foam
Finite Element Stress Analysis of Airplane Seat
Ball Throwing Machine Design To Develop Footballers’ Technical Attributes
The Effect of H2 O on the Use of Ethanol as Reductant in the SCR System
Cylindro-Conical Mild Steel Projectile Impact on E-Glass Fiber Reinforced Laminated Composite Plate Including Delamination Analysis
Cilt: 5 - Sayı : 2
Spark Plasma Sintering of Nano Silicon Carbide Reinforced Alumina Ceramic Composites
Fibre Volume Fraction and Impact Strength Analysis of Reinforced Polyester Composites
A Numerical Investigation of The Fracture Energy of Materials for Fuel Cell End Plates
Thermal Comfort in an Office Room Using Square Diffuser
Experimental Investigation of the Hybrid Damper Clutch System Under Dynamic Conditions of an Automobile Powertrain
Building Up Mathematical Modeling Using Spot Welding Parameters and Prediction Weld Nugget by Minitab
On the Effect of Through-Thickness Integration for the Blank Thickness and Ear Formation in Cup Drawing FE Analysis
2020
Cilt: 4 - Sayı : 3
Estimation of the Experimental Drying Performance Parameters Using Polynomial SVM and ANN Models
Torsional Vibration Analysis of Carbon Nanotubes Using Maxwell and Kelvin-Voigt Type Viscoelastic Material Models
Scalar Dielectric Constant Extraction of Planar Materials from Reflection Measurements
Investigation of Thermal Behavior of Lithium-Ion Batteries under Different Loads
Evaluation of Plasticity Models Using Uniaxial Tensile Test
On the Way to Real Applications: Aluminum Matrix Syntactic Foams
Design and Fabrication of a Modular Melon Depodding Machine for Optimum Performance in Nigerian Agricultural Sector
Cilt: 4 - Sayı : 4
Modeling and Simulation of Anti-Skid Control System of Railway Vehicle in Curved Track
A Simple Approach for Controlling an Open-Source Syringe Pump
Exergetic Investigation of the Effects of Superheating and Subcooling on Performance of a Vapor Compression Refrigeration Cycle
A Detailed Analysis of Daily, Seasonal and Yearly Performance Values of Photovoltaic Modules Using by a Simplified Method
Detailed Thermal Design and Control of an Observation Satellite in Low Earth Orbit
Dye Injection Flow Visualization Around a Rotating Circular Cylinder
Analysis and Control of Single Phase Grid Connected Modular Multilevel Converter in Per Unit
Cilt: 4 - Sayı : 2
Investigation of the Effects of Gasoline-Bioethanol Blends on Engine Performance and Exhaust Emissions in a Spark Ignition Engine
Production, Characterization and Surface Properties of Sr Doped Hydroxyapatite Coating on Magnesium Alloy by Hydrothermal Method
A Dynamic Approach In Production Management for Automotive Field
Performance Analysis of a Large-Scale Steam Condenser Used in a Steam Power Plant
Influence Of Pressing Time On Physical And Mechanical Properties Of Particleboards Made From Scots Pine (Pinus sylvestris L.)
The dispersion energy parameters, Linear and nonlinear optical properties of Transparent Mn:ZnO nanolayers
Effect of Orientation Angle on Surface Quality and Dimensional Accuracy of Functional Parts Manufactured by Multi Jet Fusion Technology
Cilt: 4 - Sayı : 1
Static Analysis of FG Beams via Complementary Functions Method
Effect of Laser Power on Mechanical and Microstructure Properties of Pulsed Nd:YAG Laser Welded Dissimilar DP600- DP1000 Steel Sheets
Numerical Investigation of Flow Structures For Four Buildings at Different Distances
A Numerical Investigation of a Bird Strike on the Structure of an Aircraft Wing Leading Edge
Comparative Techno-Economic Study of Solar Thermal Power Plants with Various Capacities: A Case for the Northern Part of Cameroon
Thermal and Economic Study of a Combined Power and Cooling Cycle
Weight Reduction of Automobile Using Glass-Mat Thermoplastic Composites in Spare-Wheel Well
2019
Cilt: 3 - Sayı : 4
Effect of Extensometer Usage on Obtaining the ForceDisplacement Curve of the Adhesively Single Lap Joint
The Effect of Uniform Magnetic Field on Pressurized FG Cylindrical and Spherical Vessels
An Experimental Study on the Effect of Fluid Temperature on the Performance of a PV-T Collector
Gray based Fuzzy Gain-Scheduling PID Controller Design for AirFuel System Under Variable Engine Operating Conditions
Performance analysis of grid-connected micro-cogeneration system based on the internal combustion engine
CFD Analysis of Exhaust Manifold for Different Designs
Mathematical Modeling and Optimization of Milling Parameters in AA 5083 Aluminum Alloy
Gray based Fuzzy Gain-Scheduling PID Controller Design for Air-Fuel System Under Variable Engine Operating Conditions
The Effect of Uniform Magnetic Field on Pressurized FG Cylindirical and Spherical Vessels
Effect of Extensometer Usage on Obtaining the Force-Displacement Curve of the Adhesively Single Lap Joint
Cilt: 3 - Sayı : 2
Biaxial deformation behavior of friction stir processed TRIP steel sheets
Aluminium High Pressure Die Casting Application on Rear Frame Rails
An investigation of the improvements of mechanical and thermal properties of high-density polyethene/nano clay composites
A Study for Detecting Flow Lines on The Aesthetic Plastic Parts During Design Phases as Using Material Flow Analysis Programs
Torsional behavior of thin section glass fiber/epoxy composite filament wound tubes: Numerical modelling
Heat Loss and Exergy Flow through Respiration of the Human Body under Different Meteorological Conditions
Vehicle Loading Conditions’ Influence Over Front Lighting Requirements and Dipped Beam Vertical Leveling Control Method
Cilt: 3 - Sayı : 3
The Effect of Tool Rotation Speed on Mechanical Properties of Friction Stir Spot Welded (FSSW) AA7075-T6 Aluminium Alloy Sheets
Friction and Wear Behavior of Fiber Reinforced Polymer-Matrix Composites Containing Ulexite and Pinus Brutia Cone Dust
Design and Analysis of a Solar Powered Absorption Refrigeration System for Cooling a House in Isparta Province
Experimental investigation of noise characteristic of a compression ignition engine
A practical Jointed Approach to Functionally Graded Structures by Differential Transform Method
Feasibility study of biomass power plants fired with maize and sorghum stalk in the Sub-Saharan region: a case for the northern part of Cameroon
The Effect of Adherend Thickness and Width on Fracture Behavior in Adhesively bonded Double Cantilever Beam Joints
Investigating the noise generation of a compression ignition engine at different filters
Feasibility study of Biomass power plant fired with maize and sorghum stalk in the Sub-Saharan region: the case of the northern part of Cameroon
Cilt: 3 - Sayı : 1
Impact Strength of Interply and Intraply Hybrid Laminates Based on Carbon-Aramid/Epoxy Composites
Comparative Analysis of Ejector Refrigeration System Powered with Engine Exhaust Heat using R134a and R245fa
Comparison of Two Different Electricity Tariffs for a Residence in Sivas,Turkey
Comparative Performance Evaluation of Pelton Wheel and Cross Flow Turbines for Power Generation
Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements
Combustion Visualization of Partially Premixed and Non Premixed Diesel Fuel on Single Cylinder Optical Engine
Effects of Taper Ratio on Aircraft Wing Aerodynamic Parameters: A Comperative Study
2018
Cilt: 2 - Sayı : 2
Prediction of effective mechanical properties of composite materials using homogenization approach: Application to tungsten fiber reinforced bulk metallic glass matrix composite
Estimation of the Global Solar Radiation with the Artificial Neural Networks for the City of Sivas
A Short Survey on Currently Used Experimental Setupsfor Testing Glaucoma Drainage Devices
A Unified Approach for Out-of-Plane Forced Vibration of Axially Functionally Graded Circular Rods
Mechanical Behavior of Functionally Graded Pressure Vessels Under the Effect of Poisson’s Ratio
Cilt: 2 - Sayı : 3
Bio-composite materials: a short review of recent trends, mechanical and chemical properties, and applications
Exhaust emissions of diesel engine with CuNO3 nano additive and butanol-diesel blends
3D Finite Element Modelling of Weld Bead Penetration in Tungsten Inert Gas (TIG) Welding of AISI 1020 Low Carbon Steel Plate
Numerical Analysis of Flow and Heat Transfer for Semi Spheres Placed As Multiple Serials In a Channel
Effect of Spark Plug Alteration on Performance Using Hydrogen Enriched Gasoline in Si Engine Under Various Loads and Compression Ratios
Cilt: 2 - Sayı : 4
Crack Analysis in the Sae 1117 Steel Shafts for Inclusion and Heat Treatment Combination Effect
Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads
Insulated Patient Transport Capsule for Chemical, Biological, Radiological and Nuclear (CBRN) Contamination Cases
The Effect of Dolly Suspension Parameters to the European Modular System Vehicle Combination
Out-of-Plane Vibration Analysis of Multiple-Stepped Circular Beam
Influence of the Composition on the Exploitation Properties of Combined Medium Density Fibreboards Manufactured with Coniferous Wood Residues
Cilt: 2 - Sayı : 1
State of art of hydrogen usage as a fuel on aviation
Effect of annealing temperature on the microhardness of tungsten carbide coatings deposited by RF sputtering
Comparison of the Experimental Mechanical Properties and DMA Measurement of Nanoclay Hybrid Composites§
Detection of Combined Faults in Squirrel Cage Induction Motors
Analysis and Joining of Al–Cu Plates Using Friction-Stir Welding Technique
Effect of Annealing Temperature on the Microhardness of Tungsten Carbide Coatings
Comparison of the Experimental Mechanical Properties and DMA Measurement of Nanoclay Hybrid Composites
2017
Cilt: 1 - Sayı : 4
Improving the Adhesion Bonding Strength for FML Composites by Using an Extremely Thin Mesh Steel
Characterization of Delamination Crack in Multidirectional E-glass/epoxy Composite under Mode I Loading
Effects of Rotor Material on Eddy Current Brake Performance
Advanced Material Selection Technique For High Strength and Lightweight Spur Gear Design
Comparison of Vibration Durability Tests with respect to Fatigue Damage & Validation Study
Cilt: 1 - Sayı : 3
Determination of Parking Lots and Pedestrian Way Effects on the Queue Length and Emission Values in the New Campus of Adana Science And Technology University
An Efficient Dynamic Analysis of Planar Arches
Optimization of Traffic Signalization Timings to Reduce Queue Length and Vehicle Delays: A Case Study in Çukurova University
Glass/Polypropylene Commingled Yarns for Damage Tolerant Thermoplastic Composites
Design of a Dual Operated Cassava Chipper
Cilt: 1 - Sayı : 2
Influence of the compression ratio on the performance and emission characteristics of a vcr diesel engine fuelled with alcohol blended fuels
A hybrid approach for the prediction and optimization of cutting forces using grey-based fuzzy logic
Fuel properties, performance and emission characterization of waste cooking oil (WCO) in a variable compression ratio (VCR) diesel engine
District Heating and Power Generation Based Flue Gas Waste Heat Recovery
Thermodynamic Analysis of Bus Air Conditioner Working with Refrigerant R600a
Cilt: 1 - Sayı : 1
Non-Destructive Examination of Underground Pressure Vessels Using Acoustic Emission (AE) Techniques
Analysis of dehumidification and humidity removal process of desiccant wheel
Comparative analysis of various modelling techniques for emission prediction of diesel engine fueled by diesel fuel with nanoparticle additives
The lateral inhibition as conditional entropy enhancer
Pulsating Flow and Heat Transfer in Wavy Channel with Zero Degree Phase Shift
Yayın Aralığı:
Yılda 4 Sayı
Başlangıç:
2017
Yayıncı:
Ahmet Çalık
14.3b
5.6b
Dergi Detay