Osman KARA, Ertaç HÜRDOĞAN, Orhan BÜYÜKALACA

Analysis of dehumidification and humidity removal process of desiccant wheel

Desiccant cooling technology is an environmentally attractive alternative to conventional mechanical air conditioning. A desiccant cooling system is a suitable way to improve indoor air quality due to its superior humidity control and it also provide as economical and cleaner for hot and humid regions. The most important component of the technology is the desiccant wheel which is used to remove the humidity of air. In this study, the analysis of dehumidification and humidity removal process of desiccant wheel were carried out using the performance data given by manufactures of the desiccant rotary wheel. Two parameters (Fd, Fr) were defined for the analysis of the process. It was found that dehumidification and regeneration processes do not occur at constant wet bulb temperature. An equation for Fd and Fr which depends on the humidity ratio of outdoor air and regeneration temperature was composed.

Keywords:

Air conditioning, Desiccant cooling Dehumidification, wheel, wheel,

PDF

___

Daou, K., Wang, R., and Xia, Z. (2006). Desiccant cooling air conditioning: a review. Renewable and Sustainable Energy Reviews, vol. 10, no. 2, pp. 55-77.
Al-Alili, A., Hwang, Y., and Radermacher, R. (2015). Performance of a desiccant wheel cycle utilizing new zeolite material: Experimental investigation. Energy, vol. 81, pp. 137-145. http://dx.doi.org/10.1016/j.energy.2014.11.084
Ali Mandegari, M. and Pahlavanzadeh, H. (2009). Introduction of a new definition for effectiveness of desiccant wheels. Energy, vol. 34, no. 6, pp. 797-803. http://dx.doi.org/10.1016/j.energy.2009.03.001
Jia, C.X., Dai, Y.J., Wu, J.Y., and Wang, R.Z. (2006). Experimental comparison of two honeycombed desiccant wheels fabricated with silica gel and composite desiccant material. Energy Conversion and Management, vol. 47, no. 15, pp. 2523-2534. http://dx.doi.org/10.1016/j.enconman.2005.10.034
Jia, C.X., Dai, Y.J., Wu, J.Y., and Wang, R.Z. (2007). Use of compound desiccant to develop high performance desiccant cooling system. International Journal of Refrigeration, vol. 30, no. 2, pp. 345-353. http://dx.doi.org/10.1016/j.ijrefrig.2006.04.001
De Antonellis, S., Intini, M., Joppolo, C.M., Molinaroli, L., and Romano, F. (2015). Desiccant wheels for air humidification: An experimental and numerical analysis. Energy Conversion and Management, vol. 106, pp. 355-364. http://dx.doi.org/10.1016/j.enconman.2015.09.034
Liu, X.-H., Zhang, T., Zheng, Y.-W., and Tu, R. (2016). Performance investigation and exergy analysis of two-stage desiccant wheel systems. Renewable Energy, vol. 86, pp. 877-888. https://doi.org/10.1016/j.renene.2015.09.025
ASHRAE (2004). Desiccant Dehumidification and Pressure Drying Equipment, American Society of Heating, Refrigeration and Air Conditioning Engineers, Vol.22, Atlanta.
Kara O. (2009). Design of Air-Conditioning System with Dehumidification. Çukurova University Institute of Natural and Applied Sciences, Department of Mechanical Engineering.

Yayın Aralığı: Yılda 4 Sayı
Başlangıç: 2017
Yayıncı: Ahmet Çalık

Arşiv