Erinç ULUDAMAR, Kadir AYDIN, Kerimcan ÇELEBİ, Mustafa ÖZCANLI

Experimental investigation of noise characteristic of a compression ignition engine

Noise is a very important phenomena for passenger comfort in a vehicle. Engine of the vehicles producedisturbing noises in different frequencies. In the application of acoustic, there are different filters to predict thesound pressure level and disturbing noises. The aim of the present study is to investigate the noise characteristicof a compression ignition engine at different weighting filters. In the experiments, the engine was fuelled withlow sulphur diesel and sunflower biodiesel fuels and it run at different engine speeds ranging from 1200 to 2400rpm, with steps of 300 rpm. The results indicated that noise characteristic of compression engine with enginespeed shows different trends at A- weighting filter than C- and Z- weighting filters especially at 1500 rpm.Moreover, in the study, it was cleared that the SPL decrease with the addition of biodiesel fuel regardless of itsratio.

PDF

___

[1] Jung, W., Elliott, S. J., & Cheer, J. (2019). Local active control of road noise inside a vehicle. Mechanical Systems and Signal Processing,121, 144-157.
[2] Zhang P. X. (2005). Psychoacoustics. In: Ballou G. M. (eds.) Handbook for Sound Engineers. 4th ed. USA:Elsevier Inc.
[3] Patel, C., Tiwari, N., & Agarwal, A. K. (2019). Experimental investigations of Soyabean and Rapeseed SVO and biodiesels on engine noise, vibrations, and engine characteristics. Fuel, 238, 86-97.
[4] Torregrosa, A. J., Broatch, A., Gil, A., & Gomez-Soriano, J. (2018). Numerical approach for assessing combustion noise in compression-ignited Diesel engines. Applied Acoustics, 135, 91-100.
[5] Sancho S, Gaja E, Peral-Orts R, Clemente G, Sanz J, Velasco-Sánchez E., (2017). Analysis of sound level emitted by vehicle regarding age. Appl Acoust. vol.126, pp.162–169
[6] Hoffmann, A., & Kropp, W. (2019). Auralization of simulated tyre noise: Psychoacoustic validation of a combined model. Applied Acoustics, 145, 220-227.
[7] Sinay J, Balážiková M, Dulebová M, Markulik Š, Kotianová Z., (2018). Measurement of low-frequency noise during CNC machining and its assessment. Meas J Int Meas Confed. vol.119, pp.190–195
[8] Çalık, A. (2018). Determination of vibration characteristics of a compression ignition engine operated by hydrogen enriched diesel and biodiesel fuels. Fuel, 230, 355-358.
[9] Taghizadeh-Alisaraei, A., Ghobadian, B., Tavakoli-Hashjin, T., Mohtasebi, S. S., Rezaei-asl, A., & Azadbakht, M. (2016). Characterization of engine's combustion-vibration using diesel and biodiesel fuel blends by time-frequency methods: A case study. Renewable energy, 95, 422-432.