European Mechanical Science
- Investigating the biomechanics of the biceps brachii muscle during dumbbell curl exercise: A comprehensive approach
- Investigation of alternative vehicle applications for reducing greenhouse gas emissions in urban public transport: The case of Adana province
- Metaheuristic algorithm-based cascade PID controller design for fixed wing unmanned aerial vehicle
- Effect of nano hybrid additives on low velocity impact responses of aramid composite plates: example of CNT and ZrO2
- Single-pulse MIG welded Perform 700 steel joints with various welding parameters
- Baby cry-sensitive armband design for parents with hearing loss
- Determination of effects of some alcohol blends on performance, emission, mechanical vibration and noise in diesel engines
- Stress concentration factor based design curves for cylinder-cylinder connections in pressure vessels
- Optimizing printing parameters for enhanced mechanical properties of 3D printed PLA octet lattice structures
- Structural and topology optimization of steel construction profiles in solar energy systems
- Investigation of the velocity, mach number, and turbulent parameters for different projectile rear geometry
- Evaluating the effectiveness of combined hardening models to determine the behavior of a plate with a hole under combined loadings
- A numerical approach in the investigation of the effects of diethyl ether and ethanol mixtures on combustion characteristics and NO emissions in a DI diesel engine
- Finite element analysis of the seepage problem in the dam body and foundation based on the Galerkin’s approach
- Web based remote agricultural control and consultancy application: An early diagnostic warning system
- Assessing household damages using multi-model deep learning pipeline
- Application of rotational accelerometers on the measurement of automotive headlamp cut-off deviation
- FEA analysis and optical measurement of city bus composite floor structure
- Deflection analysis of functionally graded equal strength beams
- Numerical simulation of a magnetic induction coil for heat treatment of an AISI 4340 gear
- Analytical investigation of a new approach to calculation for effective length of the rolling element used in closed end needle roller bearings of driveshaft
- Optimization of process parameters of medium carbon steel joints joined by MIG welding using Taguchi method
- Solar assisted heat pump modelling
- A mechanical model and stress-strain response of the biceps brachii under static load
- Assessment of binary metallic-based nanoparticles addition effects on performance, emission, and vibration behaviors of a diesel engine
- Surface pressure effect on rivet-connected l-corner plates exposed to axial and flexural loadings
- Production and mechanical characterization of polyethylene matrix composites with the addition of linen and cotton waste fabric filler materials
- Effect of repair parameters on composite plates under low velocity impact
- Influence of ecological Juniperus Drupacea cone powder on mechanical and physical properties of fiber-reinforced composite friction materials
- Evaluation of fracture toughness and Charpy V-notch test correlations for selected Al alloys
- Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel
- Estimation of three-point bending behavior using finite element method for 3D-printed polymeric sandwich structures with honeycomb and reentrant core
- Thermo-hydraulic performance investigation of a heat exchanger tube inserted with twisted tapes modified with various twist ratio and alternate axis
- Computer aided numerical damage analysis of the axle shaft
- Validation of A356T6 automobile wheel fatigue strength using the finite elements method
- Analysis of different methods of suppressing generator noise reaching indoor noise
- Comparison of pure-hydrogen production performances of blast furnace slag, and metal powders in sodium borohydride hydrolysis reaction
- Electromagnetic Analysis of Organic Waste and Blust Furnace Slag Mixtures
- Characterization of Mechanical of CTBN Liquid Rubber‐Modified Epoxy Cured by Anhydride- and Amine-Based Agent
- Estimating Global Solar Radiation from Empirical Models: An Application
- High Voltage Gain Multi-port Bidirectional DC-DC Converter with an Effective Multi-loop Control Strategy for PV/Battery Integrated Systems
- Effect of Fabric Structural Parameters on Various Comfort Properties of Automobile Seat Cover Fabrics
- Effect of Build Orientation on Mechanical Behaviour and Build Time of FDM 3D-Printed PLA Parts: An Experimental Investigation
- Fracture Analysis of Case Hardening in Kingpins Parts
- A preliminary Investigation of Surface Micro Modification Effects on the Biocompatibility of 316L Stainless Steel
- Static Analysis of Trailers with Demountable Chassis
- Numerical Investigation of Fatigue Behavior of Non-patched and Patched Aluminum/Composite Plates
- Design and Manufacturing of a Pneumatic Driven Compression Spring Fatigue Machine
- Investigation of the Influence of Cold-Treatment on Properties of Advanced High Strength Automotive Steels
- A Battery Powered on-Chip Peristaltic Pump for Lab-On-A-Chip Applications
- Efficiency of the Gaver-Stehfest Method Transient Response of a Spiral Fin
- Some New Approximate Solutions in Closed-Form to Problems of Nanobars
- Finite Element Simulation of Dent Resistance For Automotive Rear Bumper
- Research of Effect on Gasoline-2-Propanol Blends on Exhaust Emission of Gasoline Engine with Direct Injection Using Taguchi Approach
- An Experimental Investigation of the Flow Structure on a Face Mannequin With / Without a Face Shield
- Hybrid Taguchi Based Grey Algorithm for Multi Objective Optimization of Gas Metal Arc Welded DP1000 Steel
- Research of Effect on Gasoline-2-Propanol Blends on Exhaust Emission of Gasoline Engine with Direct Enjection Using Taguchi Approach
- The Efficiency of The Gaver-Stehfest Method Transient Response of A Spiral Fin
- Conceptual Design of Fuel Cell Based Hybrid Unmanned Air Vehicle
- Design and Thermal Analysis of High Power LED Light
- Numerical Study on Solidification of Phase Change Materials Embedded with Metal Foam
- Finite Element Stress Analysis of Airplane Seat
- Ball Throwing Machine Design To Develop Footballers’ Technical Attributes
- The Effect of H2 O on the Use of Ethanol as Reductant in the SCR System
- Cylindro-Conical Mild Steel Projectile Impact on E-Glass Fiber Reinforced Laminated Composite Plate Including Delamination Analysis
- Spark Plasma Sintering of Nano Silicon Carbide Reinforced Alumina Ceramic Composites
- Fibre Volume Fraction and Impact Strength Analysis of Reinforced Polyester Composites
- A Numerical Investigation of The Fracture Energy of Materials for Fuel Cell End Plates
- Thermal Comfort in an Office Room Using Square Diffuser
- Experimental Investigation of the Hybrid Damper Clutch System Under Dynamic Conditions of an Automobile Powertrain
- Building Up Mathematical Modeling Using Spot Welding Parameters and Prediction Weld Nugget by Minitab
- On the Effect of Through-Thickness Integration for the Blank Thickness and Ear Formation in Cup Drawing FE Analysis
- Estimation of the Experimental Drying Performance Parameters Using Polynomial SVM and ANN Models
- Torsional Vibration Analysis of Carbon Nanotubes Using Maxwell and Kelvin-Voigt Type Viscoelastic Material Models
- Scalar Dielectric Constant Extraction of Planar Materials from Reflection Measurements
- Investigation of Thermal Behavior of Lithium-Ion Batteries under Different Loads
- Evaluation of Plasticity Models Using Uniaxial Tensile Test
- On the Way to Real Applications: Aluminum Matrix Syntactic Foams
- Design and Fabrication of a Modular Melon Depodding Machine for Optimum Performance in Nigerian Agricultural Sector
- Modeling and Simulation of Anti-Skid Control System of Railway Vehicle in Curved Track
- A Simple Approach for Controlling an Open-Source Syringe Pump
- Exergetic Investigation of the Effects of Superheating and Subcooling on Performance of a Vapor Compression Refrigeration Cycle
- A Detailed Analysis of Daily, Seasonal and Yearly Performance Values of Photovoltaic Modules Using by a Simplified Method
- Detailed Thermal Design and Control of an Observation Satellite in Low Earth Orbit
- Dye Injection Flow Visualization Around a Rotating Circular Cylinder
- Analysis and Control of Single Phase Grid Connected Modular Multilevel Converter in Per Unit
- Investigation of the Effects of Gasoline-Bioethanol Blends on Engine Performance and Exhaust Emissions in a Spark Ignition Engine
- Production, Characterization and Surface Properties of Sr Doped Hydroxyapatite Coating on Magnesium Alloy by Hydrothermal Method
- A Dynamic Approach In Production Management for Automotive Field
- Performance Analysis of a Large-Scale Steam Condenser Used in a Steam Power Plant
- Influence Of Pressing Time On Physical And Mechanical Properties Of Particleboards Made From Scots Pine (Pinus sylvestris L.)
- The dispersion energy parameters, Linear and nonlinear optical properties of Transparent Mn:ZnO nanolayers
- Effect of Orientation Angle on Surface Quality and Dimensional Accuracy of Functional Parts Manufactured by Multi Jet Fusion Technology
- Static Analysis of FG Beams via Complementary Functions Method
- Effect of Laser Power on Mechanical and Microstructure Properties of Pulsed Nd:YAG Laser Welded Dissimilar DP600- DP1000 Steel Sheets
- Numerical Investigation of Flow Structures For Four Buildings at Different Distances
- A Numerical Investigation of a Bird Strike on the Structure of an Aircraft Wing Leading Edge
- Comparative Techno-Economic Study of Solar Thermal Power Plants with Various Capacities: A Case for the Northern Part of Cameroon
- Thermal and Economic Study of a Combined Power and Cooling Cycle
- Weight Reduction of Automobile Using Glass-Mat Thermoplastic Composites in Spare-Wheel Well
- Effect of Extensometer Usage on Obtaining the ForceDisplacement Curve of the Adhesively Single Lap Joint
- The Effect of Uniform Magnetic Field on Pressurized FG Cylindrical and Spherical Vessels
- An Experimental Study on the Effect of Fluid Temperature on the Performance of a PV-T Collector
- Gray based Fuzzy Gain-Scheduling PID Controller Design for AirFuel System Under Variable Engine Operating Conditions
- Performance analysis of grid-connected micro-cogeneration system based on the internal combustion engine
- CFD Analysis of Exhaust Manifold for Different Designs
- Mathematical Modeling and Optimization of Milling Parameters in AA 5083 Aluminum Alloy
- Gray based Fuzzy Gain-Scheduling PID Controller Design for Air-Fuel System Under Variable Engine Operating Conditions
- The Effect of Uniform Magnetic Field on Pressurized FG Cylindirical and Spherical Vessels
- Effect of Extensometer Usage on Obtaining the Force-Displacement Curve of the Adhesively Single Lap Joint
- Biaxial deformation behavior of friction stir processed TRIP steel sheets
- Aluminium High Pressure Die Casting Application on Rear Frame Rails
- An investigation of the improvements of mechanical and thermal properties of high-density polyethene/nano clay composites
- A Study for Detecting Flow Lines on The Aesthetic Plastic Parts During Design Phases as Using Material Flow Analysis Programs
- Torsional behavior of thin section glass fiber/epoxy composite filament wound tubes: Numerical modelling
- Heat Loss and Exergy Flow through Respiration of the Human Body under Different Meteorological Conditions
- Vehicle Loading Conditions’ Influence Over Front Lighting Requirements and Dipped Beam Vertical Leveling Control Method
- The Effect of Tool Rotation Speed on Mechanical Properties of Friction Stir Spot Welded (FSSW) AA7075-T6 Aluminium Alloy Sheets
- Friction and Wear Behavior of Fiber Reinforced Polymer-Matrix Composites Containing Ulexite and Pinus Brutia Cone Dust
- Design and Analysis of a Solar Powered Absorption Refrigeration System for Cooling a House in Isparta Province
- Experimental investigation of noise characteristic of a compression ignition engine
- A practical Jointed Approach to Functionally Graded Structures by Differential Transform Method
- Feasibility study of biomass power plants fired with maize and sorghum stalk in the Sub-Saharan region: a case for the northern part of Cameroon
- The Effect of Adherend Thickness and Width on Fracture Behavior in Adhesively bonded Double Cantilever Beam Joints
- Investigating the noise generation of a compression ignition engine at different filters
- Feasibility study of Biomass power plant fired with maize and sorghum stalk in the Sub-Saharan region: the case of the northern part of Cameroon
- Impact Strength of Interply and Intraply Hybrid Laminates Based on Carbon-Aramid/Epoxy Composites
- Comparative Analysis of Ejector Refrigeration System Powered with Engine Exhaust Heat using R134a and R245fa
- Comparison of Two Different Electricity Tariffs for a Residence in Sivas,Turkey
- Comparative Performance Evaluation of Pelton Wheel and Cross Flow Turbines for Power Generation
- Identifying Geometrical Parameters of Fog Lamp and Cornering Lamp, in compliance with Photometric Requirements
- Combustion Visualization of Partially Premixed and Non Premixed Diesel Fuel on Single Cylinder Optical Engine
- Effects of Taper Ratio on Aircraft Wing Aerodynamic Parameters: A Comperative Study
- Prediction of effective mechanical properties of composite materials using homogenization approach: Application to tungsten fiber reinforced bulk metallic glass matrix composite
- Estimation of the Global Solar Radiation with the Artificial Neural Networks for the City of Sivas
- A Short Survey on Currently Used Experimental Setupsfor Testing Glaucoma Drainage Devices
- A Unified Approach for Out-of-Plane Forced Vibration of Axially Functionally Graded Circular Rods
- Mechanical Behavior of Functionally Graded Pressure Vessels Under the Effect of Poisson’s Ratio
- Bio-composite materials: a short review of recent trends, mechanical and chemical properties, and applications
- Exhaust emissions of diesel engine with CuNO3 nano additive and butanol-diesel blends
- 3D Finite Element Modelling of Weld Bead Penetration in Tungsten Inert Gas (TIG) Welding of AISI 1020 Low Carbon Steel Plate
- Numerical Analysis of Flow and Heat Transfer for Semi Spheres Placed As Multiple Serials In a Channel
- Effect of Spark Plug Alteration on Performance Using Hydrogen Enriched Gasoline in Si Engine Under Various Loads and Compression Ratios
- Crack Analysis in the Sae 1117 Steel Shafts for Inclusion and Heat Treatment Combination Effect
- Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads
- Insulated Patient Transport Capsule for Chemical, Biological, Radiological and Nuclear (CBRN) Contamination Cases
- The Effect of Dolly Suspension Parameters to the European Modular System Vehicle Combination
- Out-of-Plane Vibration Analysis of Multiple-Stepped Circular Beam
- Influence of the Composition on the Exploitation Properties of Combined Medium Density Fibreboards Manufactured with Coniferous Wood Residues
- State of art of hydrogen usage as a fuel on aviation
- Effect of annealing temperature on the microhardness of tungsten carbide coatings deposited by RF sputtering
- Comparison of the Experimental Mechanical Properties and DMA Measurement of Nanoclay Hybrid Composites§
- Detection of Combined Faults in Squirrel Cage Induction Motors
- Analysis and Joining of Al–Cu Plates Using Friction-Stir Welding Technique
- Effect of Annealing Temperature on the Microhardness of Tungsten Carbide Coatings
- Comparison of the Experimental Mechanical Properties and DMA Measurement of Nanoclay Hybrid Composites
- Improving the Adhesion Bonding Strength for FML Composites by Using an Extremely Thin Mesh Steel
- Characterization of Delamination Crack in Multidirectional E-glass/epoxy Composite under Mode I Loading
- Effects of Rotor Material on Eddy Current Brake Performance
- Advanced Material Selection Technique For High Strength and Lightweight Spur Gear Design
- Comparison of Vibration Durability Tests with respect to Fatigue Damage & Validation Study
- Determination of Parking Lots and Pedestrian Way Effects on the Queue Length and Emission Values in the New Campus of Adana Science And Technology University
- An Efficient Dynamic Analysis of Planar Arches
- Optimization of Traffic Signalization Timings to Reduce Queue Length and Vehicle Delays: A Case Study in Çukurova University
- Glass/Polypropylene Commingled Yarns for Damage Tolerant Thermoplastic Composites
- Design of a Dual Operated Cassava Chipper
- Influence of the compression ratio on the performance and emission characteristics of a vcr diesel engine fuelled with alcohol blended fuels
- A hybrid approach for the prediction and optimization of cutting forces using grey-based fuzzy logic
- Fuel properties, performance and emission characterization of waste cooking oil (WCO) in a variable compression ratio (VCR) diesel engine
- District Heating and Power Generation Based Flue Gas Waste Heat Recovery
- Thermodynamic Analysis of Bus Air Conditioner Working with Refrigerant R600a
- Non-Destructive Examination of Underground Pressure Vessels Using Acoustic Emission (AE) Techniques
- Analysis of dehumidification and humidity removal process of desiccant wheel
- Comparative analysis of various modelling techniques for emission prediction of diesel engine fueled by diesel fuel with nanoparticle additives
- The lateral inhibition as conditional entropy enhancer
- Pulsating Flow and Heat Transfer in Wavy Channel with Zero Degree Phase Shift
- Yayın Aralığı: 4
- Başlangıç: 2017
- Yayıncı: Ahmet Çalık
22.5b 20.4b