VLSI-cell placement technique for Architecture of Field Programmable Gate Array (FPGA) design

The Field Programmable Gate Array (FPGA) is an on field programmable device which can be designed for different applications. Various types of software are available for its synthesis. The cell placement depends upon the designing and programming languages used for FPGA. In this paper cell placement technique of FPGA architecture is analyzed for the application of Space Vector Pulse Width Modulation (SVPWM) technique used in speed control of an induction motor. The modulation pulses are produced due to the various components activated and their interconnection in Configurable Logic Blocks (CLBs). Few of its components are so analyzed to find out the reason for their desired output response. This survey has also been conducted to find the correlation of LUTs and formulation of output.

Anahtar Kelimeler:

Field Programmable Gate Array (FPGA), Space Vector Pulse Width Modulation (SVPWM), Configurable Logic Blocks (CLBs), Look Up Table (LUT), Routing, Insulated Gate Bipolar Transistor (IGBT).

VLSI-cell placement technique for Architecture of Field Programmable Gate Array (FPGA) design

Keywords:

Field Programmable Gate Array (FPGA), Space Vector Pulse Width Modulation (SVPWM), Configurable Logic Blocks (CLBs), Look Up Table (LUT), Routing, Insulated Gate Bipolar Transistor (IGBT).,

PDF

___

Sung Mo Kang, Yusuf Leblebici, CMOS digital integrated circuits analysis and design, Third Edition, New Delhi, Tata McGraw-Hill, 2008. [2] Rachid Beguenane, Mohand A. Ouhrouche, Andrzej M. Trzynadlowski, “A new scheme for sensorless induction motor control drives operating in low speed region”, Mathematics and Computers in Simulation, Vol. 71, Issue 2, pp. 109-120, 11 April 2006.
S. Jeevananthan, R. Nandhakumar, P. Dananjayan, “Inverted sine carrier for fundamental fortiŞcation in PWM inverters and FPGA based implementations.” Serbian Journal of Electrical Engineering, Vol. 4, No. 2, November 2007, pp.171-187 Nov 2007.
Jonathan Rose, Abbas El Gamal, Alberto Sagiovanni-Vincentelli, “Architecture of Şeld programmable gate arrays” Proceeding of IEEE Vol. 81, No 7, pp.1013-1029, July 1993.
Jonathan Rose, Stephen Brown, “Flexibility of Interconnection Structures for Field Programmable Gate Array” IEEE Journal for Solid State Circuits, pp. 277 – 282, Vol. 26, Issue 3, Mar 1991.
Ying-Yu Tzuo, Tien-Sung Kuo, “FPGA Realisation of Space-Vector PWM control IC for three phase PWM inverter.” vol.12, Issue 6, pp. 953-963,. November 1997.
Abdulmagid Aounis, Silvia E Cirstea, Marcian N. Cirstea, “Reusable VHDL architectures for Induction Motor PWM vector control, targeting FPGAs.” IEEE Industrial Electronics - 32nd Annual Conference IECON 2006.pp. 4923-4928, 6-10 Nov. 2006.
Zbigniew Bielewicz, Leszek Debowaski, Eugieniusz Lowiec, “A DSP and FPGA based integrated controller Devel- opment Solution for High performance Electric Drives.” IEEE International Conference on Robotics & Automation, pp 679-684 IEEE 1996. [9] Nikolaus P. Schibli, Tung Nguyen and Alfred C. Rufer , “A three- Phase multilevel Converter for High power Induction Motor.” IEEE Transaction on Power Electronics, Volume 13, Issue 5, pp. 978-986. Sept 1998.
Adel Changuel, Robin Rolland, Ahmad Amin JARRAYA,“ Design of an adaptive Motor Controller Based on Fuzzy Logic using Behaviour Synthesis.”, IEEE Proceedings of EURO-DAC- Design Automation Conference, pp. 48–52, 16-20 Sep 1996.
M. Bounadja, A. Mellakhi, B. Belmadani, “A High Performance PWM Inverter Voltage-Fed Induction Machines Drive with an Alternative Strategy for Speed Control” Serbian Journal Of Electrical Engineering, Vol. 4, Number 1, pp. 35-49, June 2007. [12] Muhammad H Rashid, et all, Power Electronics Circuits, Drives & Applications, rev 2e Prentice Hall of India, 1998. [13] Mohan, et all, Power electronics-converters, applications and design, rev 2e, John Wiley and sons, 1995.
B.N. Singh, Bhim Singh and B.P. Singh, “Fuzzy Control Of Integrated Current Controlled Converter-Inverter Fed Cage Induction Motor Drive”, IEEE Transactions on Industry Applications, Volume 35, Issue 2, pp. 405 – 412, Mar/Apr 1999.
Muhamad H Rashid, “Power Electroncs Circuits,Drives & Applications”, rev 2e Prantice Hall of India, sept 1998. [16] Mohan, Underland, Robbins, “Power electronics-converters, applications and design.”, rev 2e, john wielly and sons,1995.
B.N. Singh, Bhim Singh and B.P. Singh, “Fuzzy Control Of Integrated Current Controlled Converter-Inverter Fed Cage Induction Motor Drive”, IA&C, p 153-159, 1995.