Antonio Ciccomancini SCOGNA, Antonio ORLANDI

Two dimensional EBG structures for multiband noise mitigation

In this paper a two dimensional (2D) electromagnetic Bandgap (EBG) structure is proposed for multi band noise mitigation in PWR/GND plane pairs. Excellent noise suppression (-60 dB) is achieved in multiple bands within the range 0--8 GHz with a low start frequency. Because of the 2D EBG, no additional metal layer is required. Signal Integrity analysis is also studied by modelling a microstrip to stripline transition (both single ended and differential) and by evaluating insertion loss, TDR as well as eye diagram.

Anahtar Kelimeler:

Turk. J. Elec. Eng. & Comp. Sci., 17, (2009), 279-288. Full text: pdf Other articles published in the same issue: Turk. J. Elec. Eng. & Comp. Sci., vol.17, iss.3.

Two dimensional EBG structures for multiband noise mitigation

Keywords:

Turk. J. Elec. Eng. & Comp. Sci., 17, (2009), 279-288. Full text: pdf Other articles published in the same issue: Turk. J. Elec. Eng. & Comp. Sci., vol.17, iss.3.,

PDF

___

R. Abhari, G.V. Eleftheriades, “Metallo - dielectric electromagnetic band gap structures for suppression and isolation of parallel-plate noise in high speed circuits”, IEEE Trans. On Microwave Theory and Tech, vol. 51, no. 6, pp. 1629– 1639, June 2003.
S. Shahparnia, O. M. Ramahi, “Electromagnetic interference (EMI) and reduction from printed circuit boards (PCB) using electromagnetic bandgap structures”, IEEE Trans. Electromagnetic Comp, vol. 46, no. 4, pp. 580–587, November 2004.
X.H. Wang, B.Z.Wang, Ye-Hai Bi, “A novel uniplanar compact photonic Bandgap power plane with ultra-broadband suppression of ground bounce noise”, IEEE Trans. Microwave and Wireless Components Letters, vol. 16, no. 5, pp. 267–268, May 2006.
J. Qin and O. M. Ramahi, “Ultra-Wideband Mitigation of Simultaneous Switching Noise Using Novel Planar Electromagnetic Bandgap Structures”, IEEE Microwave and Wireless Components Letters, Vol. 16, No. 9, pp. 487–489, September 2006.
A. Ciccomancini Scogna, “Noise suppression in high speed digital circuits by means of a novel EBG structure with triangle patches and hexagonal arrays”, IEEE Int. Symp. on EMC, Hawaii, July 2007.
A. Ciccomancini Scogna, M. Schauer, “A Novel Electromagnetic Bandgap Structure for SSN Suppression in PWR/GND plane pairs”, in Proc. of ECTC 07, Reno, Nevada.
A. Ciccomancini Scogna, A. Orlandi, V. Ricchiuti, “Signal Integrity Analysis of Single-Ended and Diﬀerential Signaling in PCBs with EBG structure”, IEEE Int. Symp. on EMC, Detroit, August 2008
CST STUDIO SUITET M2008, www.cst.com
IEEE Standard P1597, Standard for Validation of Computational Electromagnetics Computer modelling and Simulation, Part 1-2, September 2008.