Gicelio ANTONINI, Marc Di CLERICO, Antonio ORLANDI

Experimantal characterization and equivalent circuit extraction of nanowires for signal integrity applications

This paper illustrates the design steps of a printed circuit board used as test vehicles for the measurement of the electrical properties of carbon nanotube's deposit. The board has been built and used for the measurements. The measured data are post-processed in order to extract the required properties of the only nanotubes. An equivalent circuit is extracted for further use in EDA simulators and the IEEE P1597 Standard is used to compare the results.

Anahtar Kelimeler:

Turk. J. Elec. Eng. & Comp. Sci., 17, (2009), 241-252. Full text: pdf Other articles published in the same issue: Turk. J. Elec. Eng. & Comp. Sci., vol.17, iss.3.

Experimantal characterization and equivalent circuit extraction of nanowires for signal integrity applications

Keywords:

Turk. J. Elec. Eng. & Comp. Sci., 17, (2009), 241-252. Full text: pdf Other articles published in the same issue: Turk. J. Elec. Eng. & Comp. Sci., vol.17, iss.3.,

PDF

___

Website on Nanotechnology: http://nanosatyadhar.webs.io/. or http://www.chemie.de/lexikon/e/Carbon nanotube/.
D. S. Bethune, C. H. Kiang, M. S. Devries, G. Gorman, R. Savoy, J. Vazquez, and R. Beyers, “Cobalt-catalyzed growth of carbon nanotubes with single-a tomic-layerwalls,” Nature, vol. 363, pp. 605-607, 1993.
M.F.Bevilacqua, Chemical Vapour Deposition of carbon nanotubes on iron- patterned substrate: towards a control of the positioning and structure, Ph.D Thesis, University of Naples “ Federico II”, Naples, Italy, 2006 .
K.C.Gupta and all., Microstrip Lines and Sloitlines, II Edition, Artech Hous, London, 1996.”
G.Antonini, A.Orlandi, V.Ricchiuti, “De-embedding methods for characterizing PCB interconnections”, in Proc. of 9thIEEE Workshop on Signal Propagation on Interconnects, Garmish-Partenkirchen, Germany, May, 2005.
Agilent EESof, Advanced Design System, http://eesof.tm.agilent.com/products/ads main.html
IEEE Standard P1597, Standard for Validation of Computational Electromagnetics Computer Modeling and Sim- ulation, Part I and II, 2008.
A.P.Duﬀy, A.J.M.Martin, A.Orlandi, G.Antonini, T.M. Benson, M.S. Woolfson, “Feature Selective Validation (FSV) for Validation of Computational Electromagnetics (CEM)”, Part I and Part II, in IEEE Transactions on Electromagnetic Compatibility, vol. 48, n. 3, August 2006.
FSV 1D: http://uaqemc.ing.univaq.it/uaqemc/FSV 4 0 3L/
FSV 2D: http://uaqemc.ing.univaq.it/uaqemc/FSV 2D 2 0 6L/