Design, optimization, and realization of a wire antenna with a 25:1 bandwidth ratio for terrestrial communications

Wire antennas can be made wideband if the antenna is loaded with passive elements and connected to a lossless matching network. However, realization of the load component values and matching network can easily become impractical. In this study, using only a surface mount and standard component values, antenna loads and a matching network are optimized using genetic algorithms. The optimized design achieves a 25:1 bandwidth ratio, from 20 MHz to 500 MHz, with a maximum voltage standing wave ratio (VSWR) of 3.5 and minimum system gain of --5 dBi. The antenna system gain at azimuth is taken as the objective function and an exact penalty function is formulated to take into account the VSWR over the design frequency band. A loaded antenna is built and measured to corroborate the simulations results. The realized antenna is only 0.14 lambda long at 20 MHz.

Design, optimization, and realization of a wire antenna with a 25:1 bandwidth ratio for terrestrial communications

Wire antennas can be made wideband if the antenna is loaded with passive elements and connected to a lossless matching network. However, realization of the load component values and matching network can easily become impractical. In this study, using only a surface mount and standard component values, antenna loads and a matching network are optimized using genetic algorithms. The optimized design achieves a 25:1 bandwidth ratio, from 20 MHz to 500 MHz, with a maximum voltage standing wave ratio (VSWR) of 3.5 and minimum system gain of --5 dBi. The antenna system gain at azimuth is taken as the objective function and an exact penalty function is formulated to take into account the VSWR over the design frequency band. A loaded antenna is built and measured to corroborate the simulations results. The realized antenna is only 0.14 lambda long at 20 MHz.

___

  • L.J. Chu, “Physical limitations of omnidirectional antennas”, Journal of Applied Physics, Vol. 19, pp. 1163–1175, 19
  • J.S. McLean, “A re-examination of the fundamental limits on the radiation Q of electrically small antennas”, IEEE Transactions on Antennas and Propagation, Vol. 44, pp. 672–676, 1996.
  • H. Brueckman, “Improved wide-band VHF whip antenna”, IEEE Transactions on Vehicular Communications, Vol. 15, pp. 25–32, 1966.
  • R. Janaswamy, Widebanding Techniques for VHF Antennas -I and II, NPS-EC-92-010, NPS-EC-93-007, Monterey, CA, USA, Naval Postgraduate School. Boag, A. Boag, E. Michielssen, R. Mittra, “Design of electrically loaded wire antennas using genetic algorithms”, IEEE Transactions on Antennas and Propagation, Vol. 44, pp. 687–695, 1996.
  • Z. Altman, R. Mittra, A. Boag, “New designs of ultra wide-band communication antennas using a genetic algorithm”, IEEE Transactions on Antennas and Propagation, Vol. 45, pp. 1494–1501, 1997.
  • K. Yegin, “Optimization of wire antennas via genetic algorithms and simplified real frequency technique, and penetration through apertures in axi-symmetric structures”, PhD, Clemson University, Clemson, SC, USA, 1999. S.D. Rogers, C.M. Butler, A.Q. Martin, “Design and realization of GA-optimized wire monopole and matching network with 20:1 bandwidth”, IEEE Transactions on Antennas and Propagation, Vol. 51, pp. 493–501, 2003.
  • K. Yegin, A.Q. Martin, “On the design of broadband loaded wire antennas using real frequency technique and genetic algorithm”, IEEE Transactions on Antennas and Propagation, Vol. 51, pp. 220–228, 2003.
  • Y. Rahmat-Samii, E. Michielssen , Electromagnetic Optimization by Genetic Algorithms, New York, Wiley, 1999. W.I. Zangwill, “Nonlinear programming via penalty functions”, Management Science, Vol. 13, pp. 344–358, 1967. T.F. Coleman, A.R. Conn, “Nonlinear programming via an exact penalty function; global analysis”, Mathematical Programming, Vol. 24, pp. 137–161, 1982.
  • G. Di Pillo, L. Grippo, “On the exactness of a class of nondifferentiable penalty functions”, Journal of Optimization Theory and Applications, Vol. 57, pp. 339–410, 1988.
  • J.P. Dussault, “Numerical stability and efficiency of penalty algorithms”, SIAM Journal on Numerical Analysis, Vol. 32, pp. 296–317, 1995.
  • Z. Michalewitcz, C. Janikov, “Handling constraints in genetic algorithms”, Proceedings of the 3rd International Conference on Genetic Algorithms, Vol. 1, pp. 151–157, 1989.
  • J.T. Richardson, M.R. Palmer, G. Liepins, M. Hilliard, “Some guidelines for genetic algorithm with penalty functions”, Proceedings of the 3rd International Conference on Genetic Algorithms, Vol. 1, pp. 191–197, 1989.
  • Homaifar, C.X. Qi, S.H. Lai, “Constrained optimization via genetic algorithms”, Simulation, Vol. 62, pp. 242–254, 19 Mini-Circuits, Mini-Circuits RF Transformer, http://www.minicircuits.com/pdfs/TC4-1WG2+.pdf, last accessed 12 September 2012.