Luenberger observer-based sensor fault detection: online application to DC motor

Fault detection and diagnosis (FDD) are very important for engineering systems in industrial applications. One of the most popular approaches is model-based fault detection. Recently, many techniques have been proposed in the FDD area. However, there are still very few reported applications or real-time implementations of the schemes. This paper presents online sensor FDD based on the model-based approach using a Luenberger observer and experimental application on a permanent magnet DC motor. Different kinds of faults are simulated on the motor and experiments are performed to detect the faults. The experimental results demonstrate that this approach could significantly detect the time and size of the faults.

Anahtar Kelimeler:

Fault detection, observer, DC motor, experimental application

Luenberger observer-based sensor fault detection: online application to DC motor

Keywords:

Fault detection, observer, DC motor, experimental application,

PDF

___

J.J. Gertler, “Survey of model-based failure detection and isolation in complex plants”, IEEE Control Systems Magazine, Vol. 8, pp. 3–11, 1988.
J.J. Gertler, Fault Detection and Diagnosis in Engineering Systems, New York, NY, USA, Marcel Dekker, 1998.
J. Chen, R.J. Patton, Robust Model-Based Fault Diagnosis for Dynamic Systems, Dordrecht, the Netherlands, Kluwer Academic Publishers, 1999.
R. Isermann, Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance, Berlin, Germany, Springer, 2006.
R. Dixon, “Observer-based FDIA: application to an electromechanical positioning system”, Control Engineering Practice, Vol. 12, pp. 1113–1125, 2004.
L.H. Chiang, E.L. Russell, R.D. Braatz, Fault Detection and Diagnosis in Industrial Systems, Berlin, Germany, Springer, 2001.
S. Nandi, H.A. Toliyat, L. Ziaodong, “Condition monitoring and fault diagnosis of electrical machines - a review”, IEEE Transactions on Energy Conversion, Vol. 20, pp. 709–729, 2005.
V. Venkatasubramanian, R. Rengaswamy, K. Yin, S.N. Kavuri, “A review of process fault detection and diagnosis. Part I: Quantitative model-based methods”, Computers & Chemical Engineering, Vol. 27, pp. 293–311, 2003.
V. Venkatasubramanian, R. Rengaswamy, K. Yin, S.N. Kavuri, “A review of process fault detection and diagnosis. Part II: Qualitative models and search strategies”, Computers & Chemical Engineering, Vol. 27, pp. 313–326, 2003. V. Venkatasubramanian, R. Rengaswamy, K. Yin, S.N. Kavuri, “A review of process fault detection and diagnosis. Part III: Process history based methods”, Computers & Chemical Engineering, Vol. 27, pp. 327–346, 2003.
C. Youming, L. Lili, “A fault detection technique for air-source heat pump water chiller/heaters”, Energy and Buildings, Vol. 41, pp. 881–887, 2009.
Alkaya, ˙I. Eker, “Variance sensitive adaptive threshold-based PCA method for fault detection with experimental application”, ISA Transactions, Vol. 50, pp. 287–302, 2011.
R. Isermann, “Model-based fault-detection-status and applications”, Annual Reviews in Control, Vol. 29, pp. 71–85, 200 M.Y. Zhong, Q. Ding, P. Shi, “Parity space-based fault detection for Markovian jump systems”, International Journal of Systems Science, Vol. 40, pp. 421–428, 2009.
L.J. Miguel, L.F. Blazquez, “Fuzzy logic-based decision-making for fault diagnosis in a DC motor”, Engineering Applications of Artificial Intelligence, Vol. 18, pp. 423–450, 2005.
B.P. Jeppesen, D. Cebon, “Application of observer-based fault detection in vehicle roll control vehicle”, System Dynamics, Vol. 47, pp. 465–495, 2009.
O. Moseler, R. Isermann, “Application of model-based fault detection to a brushless DC motor”, IEEE Transactions on Industrial Electronics, Vol. 47, pp. 1015–1020, 2000.
C.W. Chan, S. Hua, Z.H. Yue, “Application of fully decoupled parity equation in fault detection and identification of DC motors”, IEEE Transactions on Industrial Electronics, Vol. 53, pp. 1277–1284, 2006.
R. Isermann, P. Ball´ e, “Trends in the application of model-based fault detection and diagnosis of technical processes”, Control Engineering Practice, Vol. 5, pp. 709–719, 1997.
M. Jayakumar, B.B. Das, “Fault detection, isolation and reconfiguration in presence of incipient sensor faults in an electromechanical flight control actuation system”, IEEE International Conference on Industrial Technology, pp. 92–97, 2006.
G. Heredia, A. Ollero, “Sensor fault detection in small autonomous helicopters using observer/Kalman filter identification”, Proceedings of the IEEE International Conference on Mechatronics, pp. 1–6, 2009.
X.Q. Liu, H.Y. Zhang, “Fault detection and diagnosis of permanent-magnet DC motor based on parameter estimation and neural network”, IEEE Transactions on Industrial Electronics, Vol. 47, pp. 1021–1030, 2000.