El Manâa BARHOUMI, Mansour HAJJI, Boujemâa Ben SALAH

Design of a double-stator linear switched reluctance motor for shunting railway channels

This paper presents the design and modeling of a double-stator linear switched reluctance motor for motorizing a railway channels' shunting system. The magnetic behavior of this actuator is nonlinear due to the saturation and nonlinear magnetization curves of the materials used in this actuator. For this reason, the electromagnetic quantities such as force, flux linkage, and inductance are calculated with the finite element method using the Maxwell tool. The obtained results are presented and discussed. In order to elaborate some control strategies, a new model for the proposed actuator, based on the flux and force characteristics, is validated by the simulation results using MATLAB/Simulink.

Anahtar Kelimeler:

Shunting system, railway channel, double stator linear switched reluctance motor, finite element analysis, force, flux, inductance, modeling

Design of a double-stator linear switched reluctance motor for shunting railway channels

Keywords:

Shunting system, railway channel, double stator linear switched reluctance motor, finite element analysis, force, flux, inductance, modeling,

PDF

___

T.J.E. Miller, “Optimal design of switch reluctance motors”, IEEE Transactions on Industrial Electronics, Vol. 49, pp. 1526, 2002.
J.J. Blakley, “A linear oscillating ferroresonant machine”, IEEE Transactions on Magnetics, Vol. 19, pp. 1574– 1579,1983.
R. Krishnan, Switched Reluctance Motor Drives Modeling Simulation Analysis Design and Applications, Florida, CRC Press, 2001.
M. Jufer, Electromecanique, Presses polytechniques et universitaires romandes, Lausanne, 1995.
F. Daldaban, N. Ustkoyuncu, “Inductance estimating of linear switched reluctance motors with the use of adaptive neuro-fuzzy inference systems”, Gazi University Journal of Science, Vol. 22, pp. 89–96, 2009.
E.M. Barhoumi, B. Ben Salah, “Design and simulation of a new LSRM for shunting the railways channels”, International Review on Modeling and Simulations, Vol. 3, pp. 1072–1078, 2011.
E.M. Barhoumi, B. Ben Salah, “Modeling and control of a new LSRM for shunting the railways channels”, International Review on Modeling and Simulations, Vol. 4, pp. 2012–2019, 2011.
E.M. Barhoumi, B. Ben Salah, “Modeling of a double stator LSRM based on finite elements analysis”, 12th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering, pp. 761–769, 20 E.M. Barhoumi, M. Hajji, B. Ben Salah, “Design of a double stator LSRM with Improvements in the mobile structure”, 1st International Conference on Renewable Energies and Vehicular Technology, pp. 194–198, 2012. M. Kant, J.P. Vilain, “Mod´ elisation dynamique du moteur pas ` a pas”, Revue de Physique Appliqu´ ee, Vol. 7, pp. 678–692, 1990.
B. Ben Salah, Contribution ` a la conception, la r´ ealisation, l’analyse et la commande de machines ´ electriques, M´ emoire d’Habilitation Universitaire en G´ enie Electrique, ENIT-Tunisie, 2003.