Serkan YAZAREL, Sedat KARAMAN

Possible Use of Diatomite and Pumice-Amended Mortar and Plaster in Agricultural Structures#

This study was conducted to investigate the potential use of diatomite (a natural pozzolana) and pumice in plasters and mortars to be used in agricultural buildings. Compacted and loose unit weights, specific weight, water absorption, organic matter content, abrasion resistance of aggregate (sand and pumice) and pozzolana were investigated and materials were found to comply with the relevant standards. Test results on fresh (unit weight and slum test) and hardened (unit weight, capillary water absorption, total water absorption, bending and compressive strength, vapor diffusion test) mortar samples revealed that pumice and diatomite could be used in agricultural structures. Diatomite and pumice should be heat-treated and grounded before to use in mortars. In plasters to be made with abundant pumice and diatomite sources, high water holding capacity of the materials should be taken into consideration and further researches should be carried out about their compliance with the other materials.

PDF

___

Alkan Z. 1972. Zirai İnşaat. Atatürk Üniversitesi Ziraat Fakültesi Yayınları. No. 252/A.

Anonymous. 2012b. Mesleki Eğitim ve Öğretim Sisteminin Güçlendirilmesi Projesi (MEGEP). İnşaat Teknolojisi, Özgül Ağırlık ve İnce Madde Oranı: 1-37s.

Anonymous. 2015. Diatomitin Fiziksel ve Kimyasal Analizi. Erişim: www.begtugmineral.com/belgeler, Erişim Tarihi: 2016

ASTM-C1437-5. 2001. Standard Test Method for Flow of Hydraulic Cement Mortar - Temperature and Humidity.

Biricik H. 1999. Su Geçirimliliğinin Puzolan Malzeme İle Azaltılması. TMMOB Makina Mühendisleri Odası Tesisat Mühendisliği Dergisi., Sayı:54: 20-29.

Çakır K. 2010. An experimental study on natural pozzolan blended lime mortar with soil mixture in the adobe structures used as be external plaster (M.Sc. Thesis). Mimar Sinan Fine Arts University Institute of Scıence and Technology. Architecture Department.

Mavi Ö. 2000. Improving physical and mechanical properties of lime mortars and plasters ((M.Sc. Thesis). Istanbul Technical University, Institute of Scıence and Technology. Architecture Department.

Memiş S. 2007. A study of used ground waste plastics (PET) containing an additive the plasters on agricultural structures (M.Sc. Thesis). Atatürk University, Institute of Scıence and Technology. Department of Agricultural Structures and Irrıgation.

TS EN 1097-3. 1999. Tests for mechanical and physical properties of aggregates- Part 3: Determination of loose bulk density and voids. Turkish Standards Institution: 1-20.

TS EN 1015-3. 2000. Methods of test for mortar for masonry- Part 3: Determination of consistence of fresh mortar (by flow table), Turkish Standards Institution: 1- 8.

TS EN 1015-9. 2000. Methods of test for mortar for masonry- Part 9: Determination of workable life and correction time of fresh mortar, Turkish Standards Institution: 1 - 9.

TS EN 1925. 2000. Natural stone test methods- Determination of water absorption coefficient by capillarity. Turkish Standards Institution: 1 - 9.

TS 706 EN 12620+A1, 2009. Aggregates for concrete. Turkish Standards Institution: 1 - 50.

TS ISO 3310-1. 2009. Test Sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth. Turkish Standards Institution: 1 - 19.

TS ISO 3310-2. 2015. Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate. Turkish Standards Institution: 1 - 18.

TS EN 933-10. 2010. Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving), Turkish Standards Institution: 1 - 12.

TS EN 998-2. 2011. Specification for mortar for masonry - Part 2: Masonry mortar. Turkish Standards Institution: 1 - 30.

TS EN 197-1. 2012. Cement - Part 1: Composition, specifications and conformity criteria for common cements. Turkish Standards Institution: 1 - 40.

TS EN 933-1:2012(EN). 2012. Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method. Turkish Standards Institution: 1 - 18.

TS EN 1015-11/A1. 2013. Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar. Turkish Standards Institution: 1-7.

TS EN 459-1. 2015. Building lime - Part 1: Definitions, specifications and conformity criteria. Turkish Standards Institution: 1 - 53.

TS EN 13914-1. 2016. Design, preparation and application of external rendering and internal plastering - Part 1: External rendering, Turkish Standards Institution: 1 - 63.

TS EN 13914-2. 2016. Design, preparation and application of external rendering and internal plastering - Part 2: Internal plastering. Turkish Standards Institution 1 - 39

Ünsal A, Şen H. 2008. Beton ve Beton Malzemeleri Laboratuvar Deneyleri. Ulaştırma Bakanlığı Karayolları Genel Müdürlüğü, Teknik Araştırma Dairesi Başkanlığı Malzeme Lab. Şubesi Müdürlüğü. Erişim: http://www.kgm.gov.tr/SiteCollection Documents/KGMdocuments/Baskanliklar/BaskanliklarTeknikA rastirma/Yeni%20Klasör/Yayımlar/Beton%20Lab.%20Kitap%2 0%2016.10.2008.pdf. Erişim Tarihi: 2016