Diskli Pulluklarda Disk Temel Parametreleri ilerleme Hızı ve İş Derinliğinin Toprağın Karıştırılmasına Etkileri

Bu araşt ı rmada, disk temel parametreleri farkli olan 3 adet diskli pullu ğun topra ğı kanşt ı rma etkisi belirlenmiştir. Denemelerde; diskin durum ve yön aç ı lar ı , ilerleme h ı z ı ve iş derinliğ i değ işken faktörler olarak ele al ı nm ışt ı r. Kar ışt ı rma etkisini belirlemek amac ı yla etiket materyal olarak fasülye, m ı sı r ve nohut daneleri kullan ı lm ışt ı r. Toprağı n farkl ı derinliklerine yerleştirilen etiket materyallerinin toprak i ş lemeden sonraki konumlar ı bir toprak rendesi yard ı mı yla belirlenmiştir. Sonuçlar ı n değ erlendirilmesinde, bir kar ışt ı rma katsay ı s ı ndan yararlan ı lmışt ı r. Bu katsay ı , sı fı r kanşt ı rmadaki teorik standart sapman ı n, toprak i şlemeden sonra gözlenen standart sapmaya oran ı d ı r. Araşt ı rma sonuçlanna göre; denenen her pullukta diskin durum ve yön aç ı lar ı n ı n artmas ı yla kanşt ı rma etkinliğ i artmışt ı r. ilerleme h ı z ı n ı n artmas ı yla da pulluklar ı n toprağı karışt ı rma etkileri artm ışt ı r.

Effects of Basic Disc Parameters of Disc Ploughs Forward Speed and Working Depth on the Soil Mixturing

In this research, the soil mixturing effect of three disc plough which has different basic disc parameters were determined. The position and direction angle, forward speed and working depth were taken as variable factors in the tests. Bean, maize and chickpea seeds were used as labelled material to asses the mixturing effect. After the soil cultivation, the positions of the labelled materials which located in different soil depth was deterrnined with soil grinder. In the evaluation of the results, a mixturing coefficient K was used. This coefficient is the ratio of the theoretical standart deviation in zero mixturing to the standart deviation obtained after the soil cultivation. According to the research results, the soil mixturing effect increased with the increasing disc position and direction angle for experimented ploughs. Also, the soil mixturing effects of the ploughs increased with the increasing forward speed.

___

  • Dilmeç, M., 1976. Baz ı Toprak i şleme Aletlerinin Kar ışt ı rma Etkileri Üzerinde Bir Ara şt ı rma. A.Ü.Ziraat Fakültesi Doldora Tezi, Ankara.
  • Dinçer, H., 1972. Die Bodenbewegung Bei Scheibenformigen Pflugwerkzengen. Atatürk Üniversitesi Yay ı nlar ı No: 143, Ziraat Fakültesi Yay ı nlar ı No: 70, Araşt ı rma Serisi No: 41, 64 s, Erzurum.
  • Feuerlein, W., 1968. Messmethoden und Kenngrössen Zur Ermittlung des Arbeitserfolges beim Pflügen. Grund. Landtech. Bd. 18, p. 65-77.
  • Gasser, J. K. R., 1964. Some Factors Affecting Losses of Arnmonia From Urea and Ammoni m Sulphate Applied to Soils. Journal Soil Science, 25 (2).
  • Gökçebay, B., 1969. Diskli Toprak i şleme Aletlerinin Memleketimiz Tar ı m ı ndaki Yeri ve Yerli Yap ı m Evlerinde Yap ı lan Diskli Toprak i şleme Aletleri Üzerinde Bir Araştirma. A.Ü.Ziraat Fakültesi Doktora Tezi, Ankara.
  • Hulburt, W. C. ve R. G. Menzel, 1953. Soil Mixing Characteristics of Tillage Implements. Agricultural Engineering, Vol. 34, p.702-708.
  • Keçecioğ lu, G., 1967. Toprak Kanal ı nda Çeşitli Toprak i şleme Aletleri Üzerinde Bir Ara şt ı rma. E.Ü. Ziraat Fakültesi Yayin No: 93, İ zmir.
  • Kouwenhoven, J. K. ve R, Terpstra, 1970. Mixing and Sorting of Granules by Tines. Journal Agric. Eng. Res. Vol. 15, p. 129- 147.
  • Read, K., Gebhardt, M. R. ve C. L. Day, 1968. Distribution of Trifluralin in the Soil When Mixed With Disk Harrow and Power Rotary Cultivator. Transactions of the ASAE, p. 155- 158.
  • Theissig, K., 1975. Arbeitseffekta von Geraten zur Sekundarboden Bearbeitung. Dissertation, Bonn.
Tarım Bilimleri Dergisi-Cover
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Halit APAYDIN