Vakum infiltrasyon yöntemi ile Al-10Si/SiCp kompozitlerin üretimi ve geliştirilmesi

Bu çalışmada, düşük hacim oranında SiCp/Al-10 Si metal matriks kompozitlerin üretimi için yeni bir yöntem geliştirilmiştir. Bu yöntemde düşük SiCp, hacim oranı, iyi ıslatabilirlik elde edilmiştir. Magnezyum tozu, bu yöntem için anahtar rol oynamaktadır. Tam infıltrasyon ve homojen dağılım için, sıvı sıcaklığı ve infıltrasyon zamanı önemli yöntem parametreleridir. SiCp, saf alüminyum ve magnezyum tozlan 8 saat süre ile karıştırılmıştır. Daha sonra tozlar çelik tüpler içerisine sıkıştırılmıştır. Al-10 Si sıvı alaşımı, toz kompaktlann içerisine infiltre edilmiştir. İnfıltrasyon davranışı, mikroyapı, optik mikroskop ile incelenmiştir.

Production and development of A1-10Si/SiCp metal matrix composites by vacuum infiltration

In this study, a new process has been developed to produce of low volume fraction SiCp/Al-10 Si metal matrix composites. Ih this process, low SiCp volume fraction, high infiltration distance, good wettability can be obtained. Magnesium powder has key role for this infiltration process. Melt temperature and infiltration time are important process parameters for full infiltration and homogeneous distribution. SiCp and pure aluminum and magnesium powders were mixed for 8 hours. Then powders were packed in steel tubes. An Al-10Si alloy melt was infiltrated in powder compact. Infiltration behavior, microstructure were investigated by optical microscopy.

___

1. Srivatsan TL., Ibrahim I.A., Mohamed F.A., E.J.L, Processing Techniques for Particulate- Reinforced Metal Aluminum Matrix Composites, Journal of Materials Science 26,1991 pp 5965-5978

2. Kajikawa Y., Nukami T. and Flemings M.C., Pressureless Infiltration of Aluminum Metal Matrix Composites, Metallurgical and Material Transactions A Vol 26 A, August 1995, pp 2155-2159

3. Aghajanian K., Rocazella M.A., Burke J.T., The Fabrication of Metal Matrix Composites by a Pressureless Infiltration Technique, Materials Science and Engineering, 26, 1991 pp 447-454

4. Lloyd D.J., Particle Reinforced Aluminum and Magnesium Matrix Composites, International Materials Review, 1994 Vol 39, No 1 pp 1-22

5. Rogathi P., Cast Metal Matrix Composites, Casting ASM Handbook Vol 15, 1992, USA, pp 840-854

6. Ray S., Review Synthesis of Cast Metal Matrix Particulate Composites, Materials Science and Engineering, 28, 1993, pp 5397-5413

7. Fletcher T.R., Cornie J.A., Russell K.C., A Capacitance Technique for Studying Pressure Infiltration, Materials Science and Engineering A144, 1991 pp 159-163

8. Lee K.B., Kwon H., Interfacial Reactions In SiC/Al Composite Fabricated By Pressureless Infiltration, Scripta Materialia, Apr. 15, 1997, pp 36-8