Farklı deformasyon oranlarında Fe-% 5.23 V alaşımının yeniden kristalleşme kinetiği

Bu çalışmada, Fe-% 5.23 V alaşımının yeniden kristalleşme kinetiği incelendi. % 50 ve % 70 deforme edilmiş Fe-% 5.23 V alaşımı atmosfer kontrollü olarak 560, 570, 580 ve 590 $\circ_C$' lerde tavlandı. Tavlama esnasında oluşan yeniden kristalleşme kinetiğinin Avrami denklemine uyduğu ve zaman üstü katsayının sıcaklığa bağımlı olmadığı, sabit değerler aldığı tespit edilmiştir. Beklendiği gibi, deformasyon oranının artmasıyla, yeniden kristalleşme sıcaklığının düştüğü ve yeniden kristalleşme hızının arttığı gözlenmiştir.

Recyrstallization kinetics of Fe- % 5.23 V alloy at various degrees of deformation

In this work, recrystallization kinetics of a Fe-5.23 %V binary alloy was studied. Samples cold-worked at about 50 % and 70 % were subsequently annealed at 560, 570, 580 and 590 $\circ_C$ under oxygen free (controlled atmosphere) conditions. It has been found that kinetics of recrystallization obeys an Avrami type equation with a temperature independent time exponent which takes almost aconstant value. As expected, increase in the amount of deformation reduces the temperature of recrystallization where as in return, increases the rate of recrystallization.

___

1. Gladman., T., Mc Ivor., I.D. and Dulieu., D., in Proceedings of the International Conference on Microalloying 75, Washington, USA, 32, October 1975

2. Honeycombe., R.W.K., Met. Trans. A., 7A, 915, 1976

3. Aronsson., D., in “Climax Molydenium Symposium on Steel str. Mechanisms”, Zürich, Switzerland, 77, 1969

4. Sekine., H., Trans. Iron Steel Inst., Jpn. 8, 101, 1968

5. Christian., J.W., The Theory of the Transformations in Metals. Pergaman Press, New York, 1970

6. Verhoeven., J.D., Fundamentals of Physical Metallurgy, John Wiley U.S.A, 1975

7. Chan., R.W., Acta Met., 4 , 449, 1956

8. Chan., R.W., Physical Metallurgy, North Holland, Amsterdam

9. Özdemir., A. T. High Temperature Annealing of Cold Worked and Nitrided 1% V-Fe Alloy M.E.T.Ü. Master Thesis, 1984

10. Beck., P.A. and Sperry,P.R. Trans., AIME, 180-240, 1949

11. Özdemir., A.T., Atasoy., Ö.E., Journal of Materials Science, 33, 2683-2690, 1998

12. Recrystallization, Grain Growth and Texture, ASM, City., 1966

13. Akalın., S., İşletme İstatistiği Ege Üniversitesi İşletme Bölümü Bornova-İzmir, 1977