2014 Cilt: 3 Sayı: 1
İÇİNDEKİLER
Autoclaved reactive powder concrete: the effects of steel micro-fibers and silica fume dosage on the mechanical properties
Ahsanollah Beglarigale, Çağlar Yalçınkaya, Halit Yazıcı -
Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method
Aykut Canakci, Fatih Erdemir, Temel Varol, Serdar Özkaya, Ramazan Dalmış -
Effect of bark flour on the mechanical properties of HDPE composites
Nihat Sami Çetin, Nilgül Özmen, Nasır Narlıoğlu, Vedat Çavuş -
A study of organo-modified clay type on pet-clay based nanocomposite properties
Sinem Yelkovan, Demet Yılmaz, Kasım Aksoy -
Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloying
C. Nazik, N. Tarakcioglu, A. Canakci, T. Varol, S. Ozkaya -
An investigation on physical properties of polyethylene composite with bentonite, kaolin and calcium carbonate additives
Sencer S. Karabeyoğlu, Nurşen Öntürk -
Effects of manufacturing defects on thermoformed product quality
Olcay Ekşi, Ertuğrul Selçuk Erdoğan -
Optimization of hot plate welding parameters of glass fibered reinforced Polyamide 6 (PA6 GF15) composite material by Taguchi method
Umut Kocatüfek, Çınar Yeni, Aydın Ülker, Sami Sayer, Uğur Özdemir -
Research for the spall effect after ballistic impact with finite element method
Volkan Arıkan, Bulut Berk, Ramazan Karakuzu, A. Kaan Toksoy, Onur Sayman -
The effect of metakaolin and end type of steel fiber on fiber-SIFCON matrix bond characteristics
Çağlar Yalçınkaya, Ahsanollah Beglarigale, Halit Yazıcı -
The investigation of desired product properties of polycaprolactone-hydroxy apatite composites for tissue engineering applications
Yelda Küçükgöksel, Serap Cesur -
Electrospinning of nanofibrous polycaprolactone (PCL) and collagen-blended polycaprolactone for wound dressing and tissue engineering
Begüm Zeybek, Mert Duman, Aylin Şendemir Ürkmez -
10.9b 11.1b
Arşiv
Cilt: 3 Sayı : 1
Cilt: 2 Sayı : 2
Cilt: 2 Sayı : 1
Cilt: 1 Sayı : 2
Cilt: 1 Sayı : 1