An investigation on physical properties of polyethylene composite with bentonite, kaolin and calcium carbonate additives

Bentonite, Kaolin, Calcium carbonate easily obtained in nature as mineral products are widely used in plastics industry for additive materials. In this study, Bentonite, Kaolin, and Calcium carbonate minerals were compounded with polyethylene matrix used in specific rates. Prepared compounds melted in sheet metal molds and cooled down under appropriate conditions. Thus, production of composite material was achieved. Hardness, water absorption, and physical properties of manufactured composite test specimens were investigated accurately.

An investigation on physical properties of polyethylene composite with bentonite, kaolin and calcium carbonate additives

Bentonite, Kaolin, Calcium carbonate easily obtained in nature as mineral products are widely used in plastics industry for additive materials. In this study, Bentonite, Kaolin, and Calcium carbonate minerals were compounded with polyethylene matrix used in specific rates. Prepared compounds melted in sheet metal molds and cooled down under appropriate conditions. Thus, production of composite material was achieved. Hardness, water absorption, and physical properties of manufactured composite test specimens were investigated accurately.

___

  • Takeda Y. Crystallization and elongation of irradiated high-density polyethylene. Radiation Physics and Chemistry, 1981; 18(5-6): 853 – 858.
  • Cengiz İ. Thermodynamic analysis of polyethylene and polypropylene based products and plastic injection molding process parameters with heat dissipation methods, MSc Thesis, Kastamonu University, Turkey, 2012.
  • Akkurt S. Plastik Malzeme Bilgisi, Birsen Yayınevi, 1981:7, İstanbul.
  • Schaffer JP, Saxena A, Antolovich D, Sanders TH, and Warner SB. The Science and Design of Engineering Materials, 2nd edition, Mc Graw-Hill, 1999:194, Singapore. D'yachkovskii FS and Lyudmila A Novokshonova. The synthesis and properties of polymerisation-filled polyalkenes, Russian Chemical Journals 1984; 53: 117 – 1
  • Arroyo M, Suárez RV, Herrero B and López-Manchado MA. Optimisation of nanocomposites based on polypropylene/polyethylene blends and organobentonite, 2003; 13: 2915 – 2921.
  • Murray HH and Kogel JE. Engineered clay products for the paper industry. Applied Clay Science, 2005; 29(3-4): 199 – 206.
  • Murray HH: Overview-clay mineral applications. Applied Clay Science, 1991; 5(5-6): 379 – 395.
  • Murray HH. Traditional and new applications for kaolin, smectite, and palygorskite: a general overview. Applied Clay Science, 2000; 17(5-6): 207 – 2
  • Tjong SC, Li RKY, and Cheung T. Mechanical behavior of CaCO 3 particulate-filled β-crystalline phase polypropylene composites. Polymer Engineering & Science, 1997; 37(1): 166 – 172.
  • Ling Z, Zhenghua W, Rui H, Liangbin L, and Xinyuan Z. PP/elastomer/calcium carbonate composites: effect of elastomer and calcium carbonate contents on the deformation and impact behavior. Journal of Material Science, 2002; 37(13): 2615 – 2621.
Usak University Journal of Material Sciences-Cover
  • ISSN: 2147-2785
  • Başlangıç: 2015
  • Yayıncı: Uşak Üniversitesi
Sayıdaki Diğer Makaleler

Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method

Aykut Canakci, Fatih Erdemir, Temel Varol, Serdar Özkaya, Ramazan Dalmış -

A study of organo-modified clay type on pet-clay based nanocomposite properties

Sinem Yelkovan, Demet Yılmaz, Kasım Aksoy -

Effects of manufacturing defects on thermoformed product quality

Olcay Ekşi, Ertuğrul Selçuk Erdoğan -

Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloying

C. Nazik, N. Tarakcioglu, A. Canakci, T. Varol, S. Ozkaya -

Optimization of hot plate welding parameters of glass fibered reinforced Polyamide 6 (PA6 GF15) composite material by Taguchi method

Umut Kocatüfek, Çınar Yeni, Aydın Ülker, Sami Sayer, Uğur Özdemir -

The investigation of desired product properties of polycaprolactone-hydroxy apatite composites for tissue engineering applications

Yelda Küçükgöksel, Serap Cesur -

Electrospinning of nanofibrous polycaprolactone (PCL) and collagen-blended polycaprolactone for wound dressing and tissue engineering

Begüm Zeybek, Mert Duman, Aylin Şendemir Ürkmez -

An investigation on physical properties of polyethylene composite with bentonite, kaolin and calcium carbonate additives

Sencer S. Karabeyoğlu, Nurşen Öntürk -

Autoclaved reactive powder concrete: the effects of steel micro-fibers and silica fume dosage on the mechanical properties

Ahsanollah Beglarigale, Çağlar Yalçınkaya, Halit Yazıcı -

The effect of metakaolin and end type of steel fiber on fiber-SIFCON matrix bond characteristics

Çağlar Yalçınkaya, Ahsanollah Beglarigale, Halit Yazıcı -