Usak University Journal of Material Sciences
- Autoclaved reactive powder concrete: the effects of steel micro-fibers and silica fume dosage on the mechanical properties
- Sytentesis of Al-B4C composite coating on low carbon steel by mechanical alloying method
- Effect of bark flour on the mechanical properties of HDPE composites
- A study of organo-modified clay type on pet-clay based nanocomposite properties
- Enhanced properties of an AA7075 based metal matrix composite prepared using mechanical alloying
- An investigation on physical properties of polyethylene composite with bentonite, kaolin and calcium carbonate additives
- Effects of manufacturing defects on thermoformed product quality
- Optimization of hot plate welding parameters of glass fibered reinforced Polyamide 6 (PA6 GF15) composite material by Taguchi method
- Research for the spall effect after ballistic impact with finite element method
- The effect of metakaolin and end type of steel fiber on fiber-SIFCON matrix bond characteristics
- The investigation of desired product properties of polycaprolactone-hydroxy apatite composites for tissue engineering applications
- Electrospinning of nanofibrous polycaprolactone (PCL) and collagen-blended polycaprolactone for wound dressing and tissue engineering
- Water absorption characteristics of polyester matrix composites reinforced with oil palm ash and oil palm fibre
- Simulation studies on the densification behaviour of sintered aluminium preforms
- 3D Bio-Cad modeling of human mandible and fabrication by rapid-prototyping technology
- Effect of chloride ion concentration, spraying time and pH values on corrosion behavior of friction stir welded AZ61A magnesium alloy welds in salt fog environments
- Empirical analysis of limit of desulphurization of iron ore based on multi-factorial process variables
- Experimental analysis of laminated particleboard case-type furniture reinforced by polymer composite layer
- Compressive behavior of walnut (Juglans L.) shell particles reinforced composite
- Finite element analysis of the thermo-mechanical behavior of the resistance spot welding
- Analysis and optimization of agro waste composite beam structures
- Investigate the effect of tool conical angle on the bushing height, wall thickness and forming in friction drilling of A7075-T651 aluminum alloy
- Prediction of corrosion rate of AZ31B magnesium alloy under salt fog environment in NaCl solution
- Evaluation of the wear and thermal properties of asbestos free brake pad using periwinkles shell particles
- Role of nanofiller additions on mechanical and dry sliding wear behavior of epoxy nanocomposites
- Study of drilling of multi-material (CFRP/Al) using Taguchi and statistical techniques
- Mathematical modelling of the Eddy current and its application to the material examinations
- Optimization of the heterogeneous photo Fenton degradation of a model pollutant, benzyl alcohol using UV/ZnO process
- Analysis of tube end forming process using Taguchi design of experiments
- Synthesis, characterization and optical properties of ZnO-CuO-Al2O3 semiconducting films on glass substrates by sol-gel technique
- Analysis of force fluctuation in order to determine structural defects in hot strip rolling mills
- Development of Al-Si-Fe/Rice husk ash particulate composites synthesis by double stir casting method
- Niobium boride coating on the surface of AISI 1010 by a duplex treatment
- Hardness improvement of Pb75% - Sb15% - Sn10% bearing alloy through reinforcement with 5% v/v SiO2 particulates
- Mechanical properties of bi – axial glass fiber and pistachio shell reinforced polyester composites
- Production and microstructure of AA2024 – B4C metal matrix composites by mechanical alloying method
- Sintering effect on mechanical properties of composites of bovine hydroxyapatite (BHA) – 5% (Al2O3 – TİO2)
- Banana fiber and pet bottles waste reinforced polymer composites
- Hexagonal boron nitride filled polymer nanofibers producing and characterization via electrospinning technique
- Production of banana / glass fiber bio–composite profile and its bending strength
- Production of B4Cp reinforced magnesium metal matrix composites by powder metallurgy
- Mechanical behavior of fiber reinforced polymer / metal laminate and aluminum foam sandwich composites
- Application of spacer fabrics in composite production
- ISSN: 2147-2785
- Başlangıç: 2015
- Yayıncı: Uşak Üniversitesi
13.3b 14.8b