Production and microstructure of AA2024 – B4C metal matrix composites by mechanical alloying method

In this study, effect of mechanical alloying method on the production and properties of metal matrix composites was investigated. Al2024 powders as matrix material and B4C particles (5 wt.%) as reinforcement material were used. Initially, composite powders were produced by milling the as-received powders in a high energy ball milling at different milling time. Green compacts were fabricated by composite powders pressed with an uniaxial press at different pressures. Then, green samples were sintered under an atmosphere of argon. Microstructure of the Al2024-B4C composites was investigated by scanning electron microscope (SEM). In addition, the change of composite hardness with milling time and consolidation pressure was investigated. The SEM micrographs demonstrated a uniform distribution of B4C particles in Al2024 matrix with increasing milling time. The composite hardness increased with increasing milling time and consolidation pressure. As a result, the homogeneous distribution of reinforcement particles not be obtained with liquid phase methods provided by mechanical alloying method that significantly improved the composite properties.

Anahtar Kelimeler:

Metal-matrix composites (MMCs), mechanical alloying, microstructure

Production and microstructure of AA2024 – B4C metal matrix composites by mechanical alloying method

Keywords:

Metal-matrix composites (MMCs), mechanical alloying, microstructure,

PDF

___

Boutman LJ and Krack RH. Composite Materials, London, Academic Pres. Inc. Ltd., 1974.
Cöcen Ü and Önel K. Metal matrisli kompozitler. Metalurji Dergisi, 1996; 20(104): 18 – 31.
Demirci H and Atik E. Alüminyum alaşımı-Al2O3 kompozitlerinde partikül oranının mekanik özelliklere etkisi. 6. Denizli Malzeme Sempozyumu, Denizli, 145 – 146, 12 – 13 – 14 Nisan 1995.
Kayılı M. The production of glass particle reinforced aluminium composites by vortex method, Yüksek Lisans Tezi, ODTÜ Metalurji Mühendisliği Bölümü, Ankara, 1996.
Uygur ME. Toz metalurjisi: Ekonomik bir üretim tekniği. 1. Ulusal Toz Metalurjisi Konferansı, Ankara, Eylül 1996.
Lee KB, Sim HS, Cho SY and Kwon H. Tensile properties of 5052 Al matrix composites reinforced with BC particles. Metalurjical and Materials Transactions A, 2001; 32: 4142 – 4147.
Suryanarayana C, Ivanov E, Boldyrev VV. The science and technology of mechanical alloying. Materials Science and Engineering A, 2001; 304 – 306: 151 – 158.
Çanakçı A. AA2024 Matrisli B4C parçacık takviyeli kompozitlerin vorteks yöntemiyle üretimi ve özelliklerinin incelenmesi, Doktora Tezi, KTÜ Fen Bilimleri Enstitüsü Makine Mühendisliği Anabilim Dalı, Trabzon, 2006.
Fogagnolo JB, Velasco F, Robert MH and Torralba JM. Effect of mechanical alloying on the morphology microstructure and properties of aluminum matrix composite powders. Materials Science and Engineering A, 2003; 342: 131 – 143.
Abdoli H, Salahi E, Farnoush H and Pourazrang K. Evolutions during synthesis of Al – AlN – nanostructured composite powder by mechanical alloying. Journal of Alloys and Compounds, 2008; 461: 166 – 172.
Ozdemir I, Ahrens S, Mücklich S and Wielage B. Nanocrystalline Al-Al2O3 and SiC – composites produced by high-energy ball milling. Journal of Materials Processing Technology, 2008; 205: 111 – 118.
Saberi Y, Zeberjad SM and Akbari GH. On the role of nano – size SiC on lattice strain and grain size of Al/SiC nanocomposite. Journal of Alloys and Compounds, 2009; 484: 637 – 640.
Canakci A and Varol T. Aşamalı proses kontrol katkısı tekniğinin yüksek enerjili öğütme prosesi üzerine etkisi. 1. Ulusal Nanoteknoloji Kongresi, 8 – 16, 17 – 18 Haziran 2011.
Zhao N, Nash P and Yang X. The effect of mechanical alloying on SiC distribution and the properties of 6061 aluminum composite. Journal of Materials Processing Technology, 2005; 170: 586 – 592.
Hafizpour HR, Simchi A and Parvizi S. Analysis of the compaction behavior of Al- SiC nanocomposites using linear and non-linear compaction equations. Advanced Powder Technology, 2010; 21: 273 – 278.