___

• 1. Xiong,Y, (1998) ”A stres analysis method for bi- axially loaded fastener hole in composite laminate of finite geometry”, Journal of Applied Mechanics 65,787-790.
• 2. Özbay, M, (1999) “Stress analysis of metal matrix laminated plates under in plane loading’’ , Journal of the Institute of Science and Technology, Gazi Univ. 12,3,849-857
• 3. Fish, J. Guttal R, (1996) “The s-version of finite element method for laminated composites’’, International Journal for Numerical Methods in Engineering,39,3641-3662
• 4. Sundaresan, P., Singh, G. Rao, G.V. (1998) “Buckling of moderately thick rectangular composite plates subjected to partial edge compression”International Journal Mechanicals Science , 40,11,1105-1117
• 5. Yamazaki, K. and Tsubosaka, N, (1997) “A stress analysis technique for plate and shell built-up structures with junctions and its applications to minimum weight design of stiffened strustures’’, Structural Optimization, 14,173-183
• 6. Galvanetto, U., Pellegrino, C and Schrefler, B.A.(1998) “A tree-dimensional stress recovery procedure for composite meterials” Computers & Structures, 69, 567-575
• 7. Hyer, M.W., Klang, E.C. & Cooper, D.E. (1987), “ The effects of pin elasticity, clearence and friction on the stresses in a pin-loaded orthotropic plate” Journal of Composite Materials , 21, 190-205
• 8. Karakuzu, R., Özel, A. & Sayman, O. (1997), ‘’Elastic-plastic finite element analysis of metal matrix plates with edge notches’’, Computers & Structures, 63,3 551-558
• 9. Jong, T. (1977), “Stresses around pin-loaded holes in elastically orhotropic or isotropic plates”, Journal of Composite Materials, 11, 313-331
• 10. Kaltakçı, M.Y. (1995), “İki eksenli yükleme ve-ya kesme etkisindeki daire delikli ortotropik levhalarda gerilme yağılmaları’’, S.Ü. Mühen-dislik Fakültesi Dergisi, 10,1-9
• 11. Arslan. N., Pıhtılı H.& Gur M.(2001), “Elasto-plastic stress analysis of thermoplastic matrix composite laminated and perforated plates under in-plane loading’’, Journal of Reinforced Plastics and Composites,20,1222-1252
• 12. Arslan, N., Sancaktar, E., & Çelik, M. (2000), “Elasto-plastic behavior of thermoplastic matrix roller chain link plates reinforced with steel fibers”, ASME 2000 Design Engineering Technical Conferences and Computers and Information in Engineering Conferences, 1-10
• 13. Arslan, N., Sancaktar, E. & Turgut, A. (1996), ”Elasto-Plastic Finite Element Analysis Of Isotropic Plates With U-Notches’’, ASME International Mechanical Engineering Congress and Exposition,92,45-58
• 14. Adin H. (2001) Düzlemsel Yüklü Tabakalı Kompozit Malzemelerde Elasto-Plastik Gerilme Analizi, Gazi Üniv. Fen Bil. Enst. Yüksek Lisans Tezi.