Semih BERKSUN, Saadet SAĞLAM ATSÜ, Yaşar YAZGAN

ISI İLE PRESLENEN FARKLI TAM SERAMİK KRONLARIN MARJİNAL UYUMLARININ İN VİTRO OLARAK DEĞERLENDİRİLMESİ

Bu çalışmanın amacı ısı ile preslenen 3 farklıtam seramik kron sisteminin Creapress, IPSEmpress ve Finesse; boyama ve tabakalamatekniği ve metal destekli porselen restorasyonlarınmarjinal uyumlarını silikon kopyalama tekniği vegörüntü analiz sistemi yardımıyla karşılaştırmaktır. Toplam 70 örnek, üst santral dişi yansıtanmetal daylar üzerine 7 gurupta n=10 hazırlandı.Marjinal uyum silikon kopyalama tekniği ve görüntü analizleme yöntemiyle her bir kronda 2 noktadanölçüm yapılarak değerlendirildi. Veriler tek-yönlüvaryans analizi ve eş yapma t testi ile karşılaştırıldı a=0.05 . Grupların marjinal açıklık ortalamalarının32.4 ± 13.3 ile 52.6 ± 14.8 µm arasında değiştiğibulundu. Gruplar arasında istatistiksel olarak marjinal açıklık açısından fark bulunamadı p > 0.05 .Çalışma sonuçlarımıza göre, tam seramik kronlarınmarjinal uyumları farklı ısı ile şekillendirmetekniklerinde farklılık göstermedi. Test edilen tümkronların marjinal açıklığı klinik olarak kabuledilebilir 120µm seviyesinin altında tespit edildi.Sonuç olarak, araştırmada kullanılan ısı ilepreslenen tam seramik kron sistemlerinin marjinaluyum açısından güvenilir olduğu bulunmuştur

Anahtar Kelimeler:

Isı ile preslenen tamseramik kron sistemleri, marjinal uyum, silikonkopyalama tekniği, görüntü analiz sistemi

In Vitro Evaluation of Marginal Fit of Different Heat-Pressed All-Ceramic Crown Systems

The aim of this in vitro study was to comparethe marginal fit of 3 different heat-pressed allceramic crown systems Creapress, IPS Empressand Finesse both staining and layering techniquesand porcelain-fused-to-metal restorations PFM utilizing with the silicone replica technique and animage analysis system.A total of 70 crowns were prepared for 7groups n=10 on metal dies, representing the maxillary right central incisor. Measurements of marginal fit were performed at 2 points for each crownusing the silicone replica technique and an imageanalysis system. One-way analysis of variance andpaired t test were used to compare data a=0.05 . The average marginal opening of the testedgroups ranged from 32.4 ± 13.3 to 52.6 ± 14.8 µm.Analysis revealed that there were no significant differences in the mean marginal opening among thegroups p > 0.05 . The marginal fits of crowns arenot influenced by different heat-pressed all-ceramic systems. The marginal openings of all testedgroups were less than the clinically acceptable limitof 120µm. As a result of this study, all heat-pressed allceramic crown systems are reliable regarding themarginal opening

Keywords:

Heat-pressed all-ceramic crownsystems, marginal fit, silicone replica technique, image analysis system,

PDF

___

Wall JG, Cipra DL. Alternative crown sys- tems. Is the metal-ceramic crown always the restora- tion of choice? Dent Clin North Am 1992;36:765-82.
Rosenblum MA, Schulman A. A review of all-ceramic restorations. J Am Dent Assoc 1997;128:297-307.
Beschnidt SM, Strub JR. Evaluation of the marginal accuracy different all-ceramic crown sys- tems after simulation in the artificial mouth. J Oral Rehabil 1999;26:582-93.
Sorensen JA. A rationale for comparison of plaque-retaining properties of crown systems. J Prosthet Dent 1989;62:264-9.
Sorensen SE, Larsen IB, Jorgensen KD. Gingival and alveolar bone reaction to marginal fit of subgingival crown margins. Scand J Dent Res 1986;94:109-14.
Goldman M, Laosonthorn P, White RR. Microleakage-full crowns and dental pulp. J Endod 1992;18:473-5.
May KB, Russell MM, Razzoog ME, Lang BR. Precision of fit: The Procera AllCeram crown. J Prosthet Dent 1998;80:394-404.
Goldin EB, Boyd III NW, Goldstein GR, Hittelman EL, Thompson VP. Marginal fit of leucite- glass pressable ceramic restorations and ceramic- pressed-to-metal restorations. J Prosthet Dent 2005;93:143-7.
Quintas AF, Oliveira F, Bottino MA. Vertical marginal discrepancy of ceramic copings with different ceramic materials, finish lines, and lu- ting agents: An in vitro evaluation. J Prosthet Dent 2004;92:250-7.
Lin MT, Munoz JS, Munoz CA, Goodacre CJ, Naylor WP. The effect of tooth preparation form on the fit of Procera copings. Int J Prosthodont 1998;11:580-90.
Suarez MJ, Villaumbrosia PG, Pradies G, Lozano JFL. Comparison of the marginal fit of Procera AllCeram crowns with two finish lines. Int J Prosthodont 2003;16:229-32.
McLean JW, von Fraunhofer JA. The esti- mation of cement film thickness by an in vivo tech- nique. Br Dent J 1971;131:107-11.
Pröbster L, Geis-Gerstorfer J, Kirchner E, Kanjantra P. In vitro evaluation of a glass-ceramic restorative material. J Oral Rehabil 1997;24:636-45.
Yeo IS, Yang JH, Lee JB. In vitro marginal fit of three all-ceramic crown systems. J Prosthet Dent 2003;90:459-64.
Sulaiman F, Chai J, Jameson LM, Wozniak WT. A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. Int J Prosthodont 1997;10:478-84.
Nakamura T, Dei N, Kojima T, Wakabayashi K. Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns. Int J Prosthodont 2003;16:244-8.
Cho LR, Choi JM, Yi YJ, Park CJ. Effect of finish line variants on marginal accuracy and fracture strength of ceramic optimized polymer/fiber-rein- forced composite crowns. J Prosthet Dent 2004;91:554-60.
Cho LR, Song HY, Koak JY, Heo SJ.
Marginal accuracy and fracture strength of ceromer/fiber-reinforced composite crowns: Effect of variations in preparation design. J Prosthet Dent 2002;88:388-95.
Oruç S, Tulunoğlu I. Fit of titanium and a base metal alloy metal-ceramic crown. J Prosthet Dent 2000;83:314-8.
Pilo R, Cardash HS. In vivo retrospective study of cement thickness under crowns. J Prosthet Dent 1998;79:621-5.
Valderrama S, Roekel N, Andersson M, Goodacre CJ, Munoz CA. A comparison of the mar- ginal and internal adaptation of titanium and gold- platinum-palladium metal ceramic crowns. Int J Prosthodont 1995;8:29-37.
Mou SH, Chai T, Wang JS, Shiau YY. Influence of different converengence angles and tooth preparation heights on the internal adaptation of Cerec crowns. J Prosthet Dent 2002;87:248-55.
Boening KW, Wolf BH, Schmidth AF, Kastner K, Walter MH. Clinical fit of Procera All Ceram crowns. J Prosthet Dent 2000; 84: 419- 24.
Gemalmaz D, Berksun S, Alkumru HN, Kasapoglu C. Thermal cycling distortion of porce- lain fused to metal fixed partial dentures. J Prosthet Dent 1998;80:654-60.
Ash M Jr. Wheeler’s dental anatomy, physiology and occlusion.7th ed. Philadelphia: WB Saunders; 1993 p.170-217,274-331.
Behr M, Rosentritt M, Leibrock A, Schneider-Feyrer S, Handel G. In-vitro study of frac- ture strength and marginal adaptation of fibre-rein- forced adhesive fixed partial inlay dentures. J Dent 1999; 27: 163-8.