Aylin ŞAKAR-DELİORMANLI, Erdal ÇELİK, Mehmet POLAT

Near Net Shape Fabrication Of Pmn Scaffolds

Solid free form fabrication techniques are commonly employed in near net shaping of ceramics especially in the manufacture of microelectronics. Lead magnesium niobate (PMN) is an important relaxor ferroelectric material with perovksite structure used in the production of these multilayer ceramic devices. In this study two dimensional PMN arrays and three dimensional periodic structures were produced by robocasting which is a direct writing technique. Aqueous colloidal gels have been formulated for use as ink in solid freeform fabrication process. Results showed that complex PMN shapes having rod size down to 100 μm can be successfully produced by robocasting process to be used in microelectronic applications.

Anahtar Kelimeler:

Shaping

Near Net Shape Fabrication Of Pmn Scaffolds

Keywords:

Shaping, Near Net Shape Fabrication, Robocasting, Perovskites PMN,

PDF

___

1. Gentil,S., Damjanoviç, D., and Setter, N., Pb(Mg1/3Nb2/3)O3 and (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 relaxor ferroelectric thick films: processing and electrical characterization, Journal of Electroceramics, Vol.12, Pages 151-161, 2004.
2. Tzou, H.S., Lee, H.J, and Arnold, S.M., Smart Materials, Precision sensors/actuators, smart structures, and structronic systems, Mechanics of Advanced Materials and Structures, Vol.11, Pages 367-393, 2004.
3. Moulson, J.A., and Herbert, J.M., Electroceramics Materials Properties and Applications, (Chapman & Hall) 1990.
4. Fengbing, S., Qiang, L., Haisheng, Z., Chunhong, L., Shix,Z., and Dezhong, S., Phase formation and transitions in the lead magnesium niobate-lead titanate system, Materials Chemistry and Physics, Vol. 83, Pages 135-139, 2004.
5. Swartz, S.L., Shrout, T.R., Schulze, W.A., and Cross, L.E., Dielectric properties of lead magnesium niobate ceramics, Journal of American Ceramic Society, Vol.67, Pages 311-315, 1984.
6. Prasad, S.E., Ahmed, A., and Wheat, T.A., The role of smart materials and structure in robotics, Smart Materials and Structures. Pages 133-147, 1998.
7. Blackwood, G.H., and Ealey, M.A., Electrostrictive behavior in lead magnesium niobate (PMN) actuators part I: materials perspective, Smart Materials and Structures, Vol. 2, Pages 124-133, 1993.
8. Calvert, P., Ink jet printing for materials and devices, Chemistry of Materials, Vol. 13, Pages 3299-3305, 2001.
9. Calvert, P., and Crockett, R., Chemical Solid Freeform Fabrication: Making Shapes without Molds, Chemistry of Materials, Vol. 9, Pages, 650-663, 1997.
10. Xiaogang, L., Lei, F., Seunghun, H., Dravid, V.P., and Mirkin, C.A., Arrays of Magnetic Nanoparticles Patterned via Dip Pen Nanolithography, Advanced Materials, Vol. 14, No: 3, Pages 231-234, 2002.
11. Yoo, J., Cima, M., Scahs, E., and Suresh, S., Fabrication and Microstructural Control of Advanced Ceramic Components by Three Dimensional Printing, Ceramic Engineering and Science Proceedings, Vol. 16, Pages 755-762, 1995.
12. Brennan, R.E., Turcu, S., Hall, A., Hagh, N.M., and Safari A., Fabrication of Electroceramic Components by Layered Manufacturing, Ferroelectrics, Vol. 293, Pages 3-17, 2003.
13. Cesarano III, J., Segalman, R., and Calvert, P., Robocasting Provides Moldless Fabrication from Slurry Deposition, Ceramic Industry, Vol. 148, Pages 4, 1998.
14. Safari, A., Cesarano, J., Clem, P.G., and Bender, B., Fabrication of Advanced Functional Electroceramics Components by Layered Manufacturing (LM) Methods, Proceedings of the 13th IEEE International Symposium on Applications of Ferroelectrics, Japan, Pages 1-6, 2002.
15. Rao, R.B., Krafcik, K.L., Morales, A.M., and Lewis J.A., Microfabricated Deposition Nozzles for DirectWrite Assembly of Three Dimensional Periodic Structures, Advanced Materials, Vol. 17, No.3, Pages 289- 293, 2005.
16. Smay,J.E., Cesarano III, J., and Lewis, J.A., Colloidal inks for directed assembly of 3-D periodic structures, Langmuir, Vol. 18, Pages 5429-5437, 2002.
17. Therriault, D., Shepherd, R.E., White, S.R., and Lewis, J.A., Fugitive Inks for Direct Write Assembly of Three Dimensional Microvascular Networks, Advanced Materials, Vol. 17, No.4, Pages 395-399, 2005.
18. Wu, B.M., Borland, S.W., Giordano, R.A., Cima, L.G., Sachs, E.M., and Cima, M.J., Solid Free-Form Fabrication of Drug Delivery Devices, Journal of Controlled Release, Vol. 40, No: 1, Pages 77-87, 1996.
19. Gratson, G.M., Garcia-Santamaria, F., Lousse, V., Xu, M., Fan, S., Lewis, J.A., and Braun, P.V., Direct Write Assembly of Three Dimensional Photonic Crystals: Conversion of Polymer Scaffolds to Silicon Hollow Woodpile Structures, Advanced Materials, Vol. 18, Pages 461-465, 2006.
20. Morissette, S.L., Cesarano III, J., Lewis, J.A., and Dimos, D.B., Solid Freeform Fabrication Using Chemically Suspensions, US Patent. No: 6454972, 2002.
21. Li, Q., and Lewis, J.A., Nanoparticle Inks for Directed Assembly of Three Dimensional Periodic Structures, Advanced Materials, Vol. 15, Pages 1639-43, 2003.
22. Nadkarni, S.S., and Smay, J.E., Concentrated Barium Titanate Colloidal Gels Prepared by Bridging Flocculation for Use in Solid Freeform Fabrication, Journal of the American Ceramic Society, Vol. 89, No.1, 96-103, 2006.
23. Smay, J.E., Gratson, G.M., Shepherd, R.F., Cesarano III, J., and Lewis, J.A., Directed Colloidal Assembly of 3D Periodic Structures, Advanced Materials, Vol. 14, No.18, Pages 1279-83, 2002.
24. Lewis, J.A., Smay, J.E., Stuecker, J., and Cesarano III, J., Direct Ink Writing of Three Dimensional Ceramic Structures, Journal of the American Ceramic Society, Vol. 89, No.12, Pages 3599-3609, 2006.
25. Şakar-Deliormanlı, A., Çelik, E., and Polat, M., Rheological Behaviour of PMN Gels for Solid Freeform Fabrication, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 326, Pages 159-166, 2008.