Determination of the combustibility of polyethylene by the fire tube method

In this article, methods for reducing the combustibility of polyethylene and the physical and mechanical properties of polyethylene are considered. It is determined that PCMs modified by DBFO can be processed by injection molding.The influence of DBFO on the physical and mechanical properties of PCM based on PE and DBFO was studied, which is introduced in a different mass ratio in PE. The highest values of strength indicators are observed with the introduction in PE of 30 mass hours. DBFO.Composite materials based on PE and DBFO are classified as difficult to burn.

Determination of the combustibility of polyethylene by the fire tube method

In this article, methods for reducing the combustibility of polyethylene and the physical and mechanical properties of polyethylene are considered. It is determined that PCMs modified by DBFO can be processed by injection molding.The influence of DBFO on the physical and mechanical properties of PCM based on PE and DBFO was studied, which is introduced in a different mass ratio in PE. The highest values of strength indicators are observed with the introduction in PE of 30 mass hours. DBFO.Composite materials based on PE and DBFO are classified as difficult to burn.

___

  • 1. ОТТЕКТІ ҚҰБЫР ӘДІСІ АРҚЫЛЫ ПОЛИЭТИЛЕННІҢ ЖАНУ ҚАСИЕТІН ЗЕРТТЕУ 78 б.