Reconstruction of large chest wall defects using three-dimensional custom-made implant technology
It is a challenging issue for thoracic surgeons to repair and reconstruct large defects after chest wall resection without disturbing pulmonary functions. Currently, it is possible to produce nearly the same prosthesis anatomically as the original with the three-dimensional printer technology. Titanium-alloy prostheses produced with the three-dimensional prototyping technology by selective laser sintering technique meet the sensitive needs of reconstruction without impairing the functionality of the tissue. This custom-made titanium prostheses can be used for this purpose safely and effectively as a good alternative.
Kişiye özel üç boyutlu implant teknolojisi kullanılarak geniş göğüs duvarı defektlerinin rekonstrüksiyonu
Göğüs duvarı rezeksiyonu sonrası oluşan geniş defektlerin solunum fonksiyonlarını bozmadan onarılması ve rekonstrüksiyonu göğüs cerrahları için zor bir durumdur. Günümüzde üç boyutlu yazıcı teknolojisi ile anatomik olarak neredeyse orijinali ile aynı protezlerin üretilmesi mümkündür. Selektif lazer kalıplama tekniği kullanılarak, üç boyutlu prototipleme teknolojisi ile üretilen titanyum alaşım protezler, dokunun fonksiyonelliğini bozmadan rekonstrüksiyonun hassas ihtiyaçlarını karşılar. Bu özel yapım titanyum protezler, bu amaç için iyi bir alternatif olarak güvenli ve etkili bir şekilde kullanılabilir.
___
- 1. Lardinois D, Müller M, Furrer M, Banic A, Gugger M, Krueger T, et al. Functional assessment of chest wall integrity after methylmethacrylate reconstruction. Ann Thorac Surg 2000;69:919-23.
- 2. Dingman RO, Argenta LC. Reconstruction of the chest wall. Ann Thorac Surg 1981;32:202-8.
- 3. McCormack PM. Use of prosthetic materials in chest-wall reconstruction. Assets and liabilities. Surg Clin North Am 1989;69:965-76.
- 4. Calvin CS Ng. Recent and future developments in chest wall reconstruction. Semin Thorac Cardiovasc Surg 2015;27:234-9.
- 5. Chapelier AR, Missana MC, Couturaud B, Fadel E, Fabre D, Mussot S, et al. Sternal resection and reconstruction for primary malignant tumors. Ann Thorac Surg 2004;77:1001-6.
- 6. Mahabir RC, Butler CE. Stabilization of the chest wall: autologous and alloplastic reconstructions. Semin Plast Surg 2011;25:34-42.
- 7. Sanna S, Brandolini J, Pardolesi A, Argnani D, Mengozzi M, Dell’Amore A, et al. Materials and techniques in chest wall reconstruction: a review. J Vis Surg 2017;3:95.
- 8. Turna A, Kavakli K, Sapmaz E, Arslan H, Caylak H, Gokce HS, et al. Reconstruction with a patient-specific titanium implant after a wide anterior chest wall resection. Interact Cardiovasc Thorac Surg 2014;18:234-6.
- 9. Aragón J, Pérez Méndez I. Dynamic 3D printed titanium copy prosthesis: a novel design for large chest wall resection and reconstruction. J Thorac Dis 2016;8:E385-9.