Petra FORTE TAVČER, Danaja ŠTULAR, Jure AHTIK

ANAGLYPH GÖRÜNTÜLERİN DİJİTAL BASKI İLE TEKSTİL ÜZERİNE BASILMASI

DIGITAL PRINTING OF ANAGLYPH IMAGES ONTO TEXTILE

Anaglyph images are a way of representing of spatial images on a flat surface. They are made with combining two images or two stereo pairs. The principle of anaglyph images is based on different colour of left and right images and colour filters (3D glasses), through which we perceive the image. The possibility of printing of anaglyph images to textile was determined in this study. Investigation on the influence of typical factors such as washing, rubbing and light on the maintaining of a tree-dimensional (3D) effect was done as well. Photos were taken with digital camera FujiFilm FinePix 3D W3 and rearranged into anaglyph images with a program Stereophoto maker. Anaglyph images were printed on cotton fabric using digital ink jet printing with reactive dyes. Normal steaming and afterwashing followed the printing. It was found out, that printing was successful and spatial effect was clearly visible. The fastness of digital prints was good, and consequently the printed fabric can be washed and worn and the stereo effect remained visible

Keywords:

Anaglyph images, Stereo effect Digital printing, Reactive dyes, Fastness,

PDF

___

1. Ahtik, J., 2011, “Techniques of rendering anaglyphs in art”, Master Thesis, University of Ljubljana, Ljubljana, pp: 2, 18, 19, 20.
2. Mikuž, M., Šostar-Turk, S., Forte Tavčer, P., 2010, “Properties of ink-jet printed, ultraviolet-cured pigment prints in comparison with screen-printed, thertmal-cured pigment prints”, Coloration Technology, Vol: 126(5), pp: 249-255.
3. Forte Tavčer, P., Košir, S., Csiszar, E., 2011, “Properties of differently printed and easy-care finished linen fabrics”, Coloration Technology, Vol: 127(3), pp: 194-199.
4. Javoršek, D., Javoršek, A., 2011, “Colour management in digital textile printing”, Coloration Technology, Vol: 127(4), pp: 235-239.
5. Kosolia, C., Tsatsaroni, E.G., Nikolaidis, N.F., 2011, “Disperse ink-jet inks: properties and application to polyester fibre”, Coloration Technology, Vol: 127(6), pp: 375-364.
6. Yuen, C.W.M., Kan, C.W., 2011, “Ink-jet printing of nylon fabric using reactive dyestuff”, Coloration Technology, Vol: 127(6), pp: 390-395.
7. Onar Catal, D., Ozguney, A.T., Akcakoca Kumbasar, E. P., 2012, “The influence of rheological properties of the pretreatment thickeners on ink-jet printing quality”, Tekstil ve Konfeksiyon, Vol: 22(4), pp: 309-316