Relation between structural parameters and drying properties of cotton knitted fabrics

Kuruma hızı kumaştan ter veya nemin buharlaşma hızını belirleyen, tekstil ürünleri ile alakalı en önemli konfor parametreleri arasında yer almaktadır. Bu çalışma kapsamında örme kumaş yapısı ve örme kumaşların kuruma davranışları arasındaki ilişki araştırılmaktadır. Tek ve çift plakalı örme makinelerinde üretilen farklı örme kumaş yapılarının kuruma süresi ve su emme miktarları ölçülmüştür. Kumaşların kuruma süresi ve su emme miktarları ile kumaş sıklığı, kalınlığı ve gramajı arasındaki ilişki istatistiksel olarak analiz edilmiştir. İncelenen faktörler ile kuruma süresi arasında yüksek korelasyon olduğu bulunmuştur. Tüm bu incelenen faktörleri temsil edebilecek şekilde, örme kumaşların kuruma süresini matematiksel olarak modellenmesine imkân verecek tek bir parametre olarak metre tül ağırlığı ortaya konulmuştur. İncelenen örgü yapıları dikkate alındığında pike örgü en hızlı kururken, üç iplik örgünün kurumasının daha uzun sürdüğü görülmüştür. Bununla birlikte interlok örgünün su emme yüzdesinin en yüksek olduğu bulunmuştur. Bu çalışma kapsamında ayrıca farklı örgü yapılarının statik kuruma özelliklerinin kıyaslanabildiği yeni bir kuruma testi yöntemi önerilmiştir.

Pamuklu örme kumaşlarda kumaş yapısı ve kuruma özellikleri arasındaki ilişkinin araştırılması

ABSTRACT Drying time of textile product is an important comfort parameter that determines the evaporation speed of sweat or moisture from the fabric. The effect of structural difference on the drying properties of various knitted fabrics was evaluated in this study. Drying time and water absorption behavior of various single and double jerseys knitted structures were measured. The relation between drying time and water absorption percentage to the fabric thickness, tightness factor and areal weight was statistically analyzed. Strong correlation was found between drying time and the studied parameters. A new parameter fabric linear weight was also derived from the studied parameters in order to model the drying time of knitted fabrics mathematically. When drying time was considered, it was found that pique knit dried faster, while it took longer time to dry the three-thread fleece knit. On the other hand, the water absorption percentage of eightlock sample was the highest among all samples. A new drying test approach was also proposed to measure the static drying time of knitted fabrics capable of comparing the effect of different knitted structures.

___

  • 1.Quick Dry Merino, Technical Marketing Manual, CSIRO Textile and Fiber Technology, July 2006.
  • 2.Alay, S. & Yilmaz, D., 2010, “An Investigation of Knitted Fabric Performances Obtained From Different Natural and Regenerated Fibers”, J. Eng. Sci. and Design, 1(2), 91 – 95.
  • 3.Hes, L., & Geraldes, M.J., “Thermal insulation and wet thermal contact comfort of bed sheets”, International Conference CLOTECH 2010, 23 – 24 May 2010, Radom, Poland.
  • 4.Su, C., Fang, J., Chen X. & Wu, W., 2007 “Moisture Absorption and Release of Profiled Polyester and Cotton Composite Knitted Fabrics”, Text. Res. J., 77(10), 764-769.
  • 5.Abramaviciute, J., Mikucioniente, D. & Ciukas, R., 2011, “Static Water Absorption of Knits from Natural and Textured Yarns”, Fibres & Text. in Eastern Europe, 19(3), 60-63.
  • 6.Fungueiro, R., Filgueiras, A., Soutinho, F. & Meidi, X., 2010, “Wicking Behavior and Drying Capability of Functional Knitted Fabrics”, Text. Res. J., 80(15), 1522-1530.
  • 7.Yanilmaz, M. & Kalaoglu, F, 2012, “Investigation of Wicking, Wetting and Drying Propertyies of Acrylic Knitted Fabric”, Text. Res. J., 82(8), 820-831.
  • 8.Wang F., Zhou X., & Wang S., 2009, “Development Processes and Property Measurements of Moisture Absorption and Quick Dry Fabrics”, Fibres & Text. in Eastern Europe, 17(2), 46 – 49.
  • 9.Karahan, M. & Eren, R., 2006, “Experimental Investigation of the Effect of Fabric Parameters on Static Water Absorption in Terry Fabrics”, Fibres & Text. in Eastern Europe, 14(2), 59-63.
  • 10. Laing, M.L., Wilson, C.A., Gore, S.E., Carr, D.J., & Niven, B.E., 2007, “Determining the Drying Time of Apparel Fabrics”, Text. Res. J., 77(8), 583-590.
  • 11. Karahan, M., 2007, “Experimental Investigation of the Effect of Fabric Construction on Dynamic Water Absorption in Terry Fabrics, Fibres & Text. in Eastern Europe, 15(3), 74-80.
  • 12. Gurudatt, K., Nadkarni, V., Khilar, M. & Kartik, C., 2010, ”A Study on Drying of Textile Substrates and a New Concept for the Enhancement of Drying Rate”, J. Text. Inst, 101 (7), 635 – 644.
  • 13. D. J. Spencer. Knitting Technology: a Comprehensive Handbook and Practical Guide. Cambridge, 2001.
  • 14. British Standard: BS3449 (1990), Method for Resistance of Fabrics to Water Absorption (Static Immersion Test).
  • 15. Taiwan Standard: FTTS-FA-004 (2005), Test Method of Specified Requirements of Moisture Transferring and Quick Drying Textiles.
  • 16. Japanase Industrial Standard: JIS L 1907 (2004), Testing methods for water absorbency of textiles.
  • 17. AATCC Test Method 199 (2011), Drying Time of Textiles: Moisture Analyzer Method.
Tekstil ve Konfeksiyon-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi