Development of Multifunctional Bio-based Cotton Composite

In this study multifunctional bio-based cotton composites were fabricated. The characterization of fabricated cotton composites were investigated by using Fourier Transform Infrared Spectroscopy (FTIR), Thermo Gravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM). And also antibacterial test and dye adsorption properties were investigated. The effects of contact time, pH, temperature, and ionic strength on removal of remazol blue (RB) were studied. The antibacterial activity was studied against the S. Aureus and K. Pneumonia. Consequently dyeability of cotton was increased with treatments. These treatments can be used in textile industry for free salt dyeing which is a desirable property for cotton. And also treated cottons exhibited antibacterial activity. As a result it can be said that applications increased dyeability of cotton and were gained antibacterial properties to the cotton.

Keywords:

cotton, antibacterial, chitosan, KSF, remazol blue, adsorption dyeing free salt,

PDF

___

1. Bharathi, K. S., Ramesh, S. T. 2013. Removal of dyes using agricultural waste as low-cost adsorbents: a review. Applied Water Science, 3(4), 773-790.
2. Montazer, M., Malek, R. M. A., Rahimi, A. 2007. Salt free reactive dyeing of cationized cotton. Fibers and polymers, 8(6), 608-612.
3. Kant, R. 2011. Textile dyeing industry an environmental hazard. Natural Science, 4(1), 22-26.
4. Kadam, A. A., Lee, D. S. 2015. Glutaraldehyde cross-linked magnetic chitosan nanocomposites: Reduction precipitation synthesis, characterization, and application for removal of hazardous textile dyes. Bioresource technology, 193, 563-567.
5. Sharma, P., Kaur, H., Sharma, M., Sahore, V. 2011. A review on applicability of naturally available adsorbents for the removal of hazardous dyes from aqueous waste. Environmental monitoring and assessment, 183(1-4), 151-195.
6. Kausar, A., Iqbal, M., Javed, A., Aftab, K., Bhatti, H. N., Nouren, S. 2018. Dyes adsorption using clay and modified clay: A review. Journal of Molecular Liquids, 256, 395-407.
7. Arık, B, Seventeki̇n, N. 2011. Evaluation of antibacterial and structural properties of cotton fabric coated by chitosan/titania and chitosan/silica hybrid sol-gel coatings. Textile and Apparel, 21(2), 107-115. Retrieved from https://dergipark.org.tr/tr/pub/tekstilvekonfeksiyon/issue/23642/251832.
8. Tursucular, O, Cerkez, İ, Orhan, M , Aykut, Y . 2018. Preperation and antibacterial investigation of polycaprolactone/chitosan nano/micro fibers by using different solvent systems. Textile and Apparel, 28(3), 221-228. Retrieved from https://dergipark.org.tr/tr/pub/tekstilvekonfeksiyon/issue/39534/466845.
9. Chung, Y. C., Wang, H. L., Chen, Y. M., Li, S. L. 2003. Effect of abiotic factors on the antibacterial activity of chitosan against waterborne pathogens. Bioresource technology, 88(3), 179-184.
10. Cao, C., Xiao, L., Chen, C., Shi, X., Cao, Q., Gao, L. 2014. In situ preparation of magnetic Fe3O4/chitosan nanoparticles via a novel reduction–precipitation method and their application in adsorption of reactive azo dye. Powder Technology, 260, 90-97.
11. Reddy, D. H. K., Lee, S. M. 2013. Application of magnetic chitosan composites for the removal of toxic metal and dyes from aqueous solutions. Advances in colloid and interface science, 201, 68-93.
12. Yu, C. 2016. Preparation and Application of the Composite from Chitosan. Handbook of Composites from Renewable Materials, Structure and Chemistry, 1, 371.
13. Altınışık, A., Bozacı, E., Akar, E., Seki, Y., Yurdakoc, K., Demir, A., Özdogan, E. 2013. Development of antimicrobial cotton fabric using bionanocomposites. Cellulose, 20(6), 3111-3121.
14. Li, R., Liu, C., Ma, J., Yang, Y., Wu, H. 2011. Effect of org-titanium phosphonate on the properties of chitosan films. Polymer bulletin, 67(1), 77-89.
15. Kang, S., Qin, L., Zhao, Y., Wang, W., Zhang, T., Yang, L., ... Song, S. 2020. Enhanced removal of methyl orange on exfoliated montmorillonite/chitosan gel in presence of methylene blue. Chemosphere, 238, 124693.
16. Kaur, K., Jindal, R. 2019. Self-assembled GO incorporated CMC and Chitosan-based nanocomposites in the removal of cationic dyes. Carbohydrate polymers, 225, 115245.
17. Abdurrahim, I. 2019. Water sorption, antimicrobial activity, and thermal and mechanical properties of chitosan/clay/glycerol nanocomposite films. Heliyon, 5(8), e02342.
18. Gaan, S., Sun, G. 2009. Effect of nitrogen additives on thermal decomposition of cotton. Journal of Analytical and Applied Pyrolysis, 84(1), 108-115.
19. Ouajai, S., Shanks, R. A. 2005. Composition, structure and thermal degradation of hemp cellulose after chemical treatments. Polymer degradation and stability, 89(2), 327-335.
20. Çelebi̇, M, Özdemi̇r, Z. 2017. Dyestuffs removal from synthetic wastewater with chitosan, cross-linked chitosan and chitosan-poly (acrylic acid) conjugate. Textile and Apparel, 27(3), 283-288. Retrieved from https://dergipark.org.tr/tr/pub/tekstilvekonfeksiyon/issue/31290/340946.
21. Hwang, S. Y., Yoo, E. S., Im, S. S. 2009. Effect of the urethane group on treated clay surfaces for high-performance poly (butylene succinate)/montmorillonite nanocomposites. Polymer Degradation and Stability, 94(12), 2163-2169.
22. Chen, D., Chen, J., Luan, X., Ji, H., Xia, Z. 2011. Characterization of anion–cationic surfactants modified montmorillonite and its application for the removal of methyl orange. Chemical Engineering Journal, 171(3), 1150-1158.
23. Newcombe, G., Drikas, M. 1997. Adsorption of NOM onto activated carbon: electrostatic and non-electrostatic effects. Carbon, 35(9), 1239-1250.
24. Alberghina, G., Bianchini, R., Fichera, M., Fisichella, S. 2000. Dimerization of Cibacron Blue F3GA and other dyes: influence of salts and temperature. Dyes and Pigments, 46(3), 129-137.
25. Germán-Heins, J., Flury, M. 2000. Sorption of Brilliant Blue FCF in soils as affected by pH and ionic strength. Geoderma, 97(1-2), 87-101.
26. Akar, E., Altinişik, A., Seki, Y. 2013. Using of activated carbon produced from spent tea leaves for the removal of malachite green from aqueous solution. Ecological Engineering, 52, 19-27.
27. Ali, I., Alothman, Z. A., Alwarthan, A. 2017. Uptake of propranolol on ionic liquid iron nanocomposite adsorbent: kinetic, thermodynamics and mechanism of adsorption. Journal of Molecular Liquids, 236, 205-213.
28. Konicki, W., Aleksandrzak, M., Moszyński, D., Mijowska, E. 2017. Adsorption of anionic azo-dyes from aqueous solutions onto graphene oxide: equilibrium, kinetic and thermodynamic studies. Journal of colloid and interface science, 496, 188-200.
29. Akram, M., Bhatti, H. N., Iqbal, M., Noreen, S., Sadaf, S. 2017. Biocomposite efficiency for Cr (VI) adsorption: Kinetic, equilibrium and thermodynamics studies. Journal of Environmental Chemical Engineering, 5(1), 400-411.
30. Milonjić, S. K. 2007. A consideration of the correct calculation of thermodynamic parameters of adsorption. Journal of the Serbian chemical society, 72(12), 1363-1367.
31. Khan, S. A., Khan, M. A. 1995. Adsorption of chromium (III), chromium (VI) and silver (I) on bentonite. Waste Management, 15(4), 271-282.
32. Bedin, K. C., Martins, A. C., Cazetta, A. L., Pezoti, O., Almeida, V. C. 2016. KOH-activated carbon prepared from sucrose spherical carbon: Adsorption equilibrium, kinetic and thermodynamic studies for Methylene Blue removal. Chemical Engineering Journal, 286, 476-484.
33. Tran, H. N., You, S. J., Chao, H. P. 2016. Thermodynamic parameters of cadmium adsorption onto orange peel calculated from various methods: a comparison study. Journal of Environmental Chemical Engineering, 4(3), 2671-2682.
34. Belaroussi, A., Labed, F., Khenifi, A., Akbour, R. A., Bouberka, Z., Kameche, M., Derriche, Z. 2018. A novel approach for removing an industrial dye 4GL by an Algerian Bentonite. Acta Ecologica Sinica, 38(2), 148-156.
35. Weber, W. J., Morris, J. C. 1963. Kinetics of adsorption on carbon from solution. Journal of the sanitary engineering division, 89(2), 31-60.
36. Juang, R. S., Wu, F. C., Tseng, R. L. 2000. Mechanism of adsorption of dyes and phenols from water using activated carbons prepared from plum kernels. Journal of colloid and interface science, 227(2), 437-444.
37. Ho, Y. S., McKay, G. 1999. Pseudo-second order model for sorption processes. Process biochemistry, 34(5), 451-465.
38. Ignatova, M., Manolova, N., Rashkov, I. 2013. Electrospun Antibacterial Chitosan‐B ased Fibers. Macromolecular bioscience, 13(7), 860-872.
39. Maryan, A. S., Montazer, M., Rashidi, A., Rahimi, M. K. 2013. Antibacterial properties of clay layers silicate: a special study of montmorillonite on cotton fiber. Asian Journal of Chemistry, 25(5), 2889.
40. Demi̇r, A, Öktem, T, Seventeki̇n, N. 2008. Investigation of the usage of chitosan as an antimicrobial agent in textile industry. Textile and Apparel, 18 (2), 94-102. Retrievedfrom https://dergipark.org.tr/tr/pub/tekstilvekonfeksiyon/issue/23654/251973.

ISSN: 1300-3356
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi

Arşiv