___

• [1] Fontini K. (2009). Skid resistance performance of asphalt wearing courses with electric arc furnace slag aggregates, Waste Manag. Res. 27, 288-294
• [2] Pasetto M., Baldo N., (2010). Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace slags, Journal of Hazardous Materials, 181, 938-948
• [3] Huang Y., Bird R. N., Heidrich O., (2007). A review of the use of recycled solid waste materials in asphalt pavements, Resour. Conserv. Recycl., 52, 58-73
• [4] Geiseler J., (1996). “Use of steel works slag in Europe.” Waste Management, 16, 1-3, 59-63.
• [5] NSA, (1998). Steelmaking Slag: A Safe and Valuable Product. Washington: The Steel Slag Coalition-National Slag Association.
• [6] Proctor D., Fehling K., Shay E., Wittenborn J., Green J., Avent C., Bigham R., Connolly M., Lee B., Shepker T., and Zak M., (2000). Physical and chemical characteristics of Blast Furnace, Basic Oxygen Furnace, and Electric Arc Furnace steel industry slags. Environ. Sci. Technol. 34: 1576-1582.
• [7] Proctor D., Shay E., Fehling K., and Finley B., (2002). Assessment of human health and ecological risks posed by the uses of steel industry slags in the environment. Human and Ecological Risk Assessment 8: 681-711.
• [8] Manso J.M., Polanco J.A., Losanez M., and Gonzales J.J., (2006). Durability of concrete made with EAF slag as aggregate. Cement and Concrete Composites, 28, 6, 528-534.
• [9] Exponent, (2007). Human Health and Ecological Risk Assessment for the Environmental Applications of Steel-Making Slag: An Update. Prepared for Steel Slag Coalition Kelley Drye Collier Shannon 1050 K Street, NW Suite 400 Washington, DC 20007-5108. Prepared by Exponent 320 Goddard, Suite 200 Irvine, California 92618 August 2007.
• [10] Pellegrino C, Gaddo V., (2009). Mechanical and durability characteristics of concrete with EAF slag as aggregate. Cement Concr Compos 31, 663-671.
• [11] Sofilic T., Cosic M., Mladenovic A., Sofilic U., (2010). Utilization of EAF Steel Slag as Alternative Aggregate in Road Construction, Proceedings Book of “Utilization of steelmaking slags with by-product recovery”, Krakow, Poland, 105-120.
• [12] Fronek B. A., (2011) Feasability of Expanding the Use of Steel Slag as a Concrete Pavement Aggregate, MSci Thesis, Department of Civil and Environmental Engineering, Cleveland State University, USA
• [13] Mitchell J. K., Soga K., (2005). Fundamentals of Soil Behavior, Third Edition. New Jersey: John Wiley & Sons, Inc.
• [14] Yildirim I. Z., Prezzi M., (2011). Chemical, Mineralogical, and Morphological Properties of Steel Slag. Advances in Civil Engineering Volume 2011, Article ID 463638
• [15] Ramachandran V. S., Sereda P.J., Feldman R. F., (1964). “Mech- anism of hydration of calcium oxide,” Nature, vol. 201, no. 4916, pp. 288–299.
• [16] Karayolları Teknik Şartnamesi, 2013.
• [17] Makikyro M., (2004). Converting Raw Materials into the Products - Road Base Materials Stabilized with Slag-based Binders. University of Oulu, Department of Process and Environmental Engineering. Oulu: University of Oulu.
• [18] PennDOT, (2000). Form 408, COARSE AGGREGATE, 703.2 (a) 4. Steel Slag, Pennsylvania Department of Transportation.
• [19] Motz H., Geiseler J., (2001). Products of Steel Slags an Opportunity to Save Natural Resources. Waste Management, 21, 285-293.
• [20] Yan J., Baverman C., Moreno L., and Neretineks I. (1998). “Evaluation of time- dependent neutralizing behaviors of MSWI bottom ash and steel slag.” The Science of the Total Environment, Volume 216, Issues 1-2, pp. 41-54.
• [21] Bayless E.R., Schulz M.S., (2003). “Mineral precipitation and dissolution at two slag-disposal sites in northwestern Indiana, USA.” Environmental Geology, Vol. 45, No.2, pp. 252-261.
• [22] Roadcap, G.S., Kelly, W.R., and Bethke, C.M., (2005). “Geochemistry of extremely alkaline (pH.>12) ground water in slag-fill aquifers.” Ground Water, Vol. 43, No. 6, pp. 806-816.