Tarihi Safranbolu’yu çevreleyen kaya şevlerindeki duraysızlık problemlerinin kinematik analizlerle değerlendirilmesi
Şev kaynaklı afete uğrama olasılığı oldukça yüksek olan Safranbolu, ülkemiz için oldukça önemli bir yerleşim yeri olup, sahip olduğu tarihsel ve kültürel varlıklarla dünya mirası için de değerli bir kenttir. Bu dünya mirası kentteki zenginliklerin olası bir doğal afetten etkilenme potansiyellerinin ortaya çıkarılması oldukça önemlidir. Tarihi Safranbolu çok dik kaya şevleri ile çevrili olup, zaman zaman bu şevleri oluşturan kaya kütlesinde duraysızlıklar meydana gelmektedir. Çeşitli sebep ve şekillerde serbestleşen kaya blokları, oldukça dik olan bu şevlerde kaya düşmelerine de kaynak oluşturup şev aşağı hareket ederek tarihi kente yaşam alanlarına zarar verebilmektedir. Söz konusu zararların aza indirilmesi ve tehlike potansiyelinin ortaya konulması amacıyla bu çalışmada kaya şevleri kinematik analizlerle değerlendirilmiştir. Çalışma kapsamında kaya düşmelerine kaynak oluşturan kaya kütlelerinin özellikleri incelenmiş elde edilen veriler ve şevlerin özellikleri dikkate alınarak kinematik kontrollü duraysızlık türleri belirlenmiştir.
Evaluation of the instability problems in rock slopes surrounding historical Safranbolu by kinematic analysis
Safranbolu which has high probability for slope-induced disasters is a very worthwhile settlement for our country and also for the world with its historical and cultural heritage. Finding out potential hazards that may affect the wealth of this world heritage city is very crucial. The historic Safranbolu is surrounded by very steep rock slopes, and occasionally instability occurs in the rock mass that forms these slopes. The rock blocks that are relaesed in various causes and shapes can damage the historic town living spaces by creating a source for the rock fallings and moving down the slope in these very steep slopes. The rock slopes were evaluated by kinematic analysis in order to reduce the mentioned damages and to reveal potential hazards. In the study, characteristics of mass that causes rock fallings are analysed, kinematic controlled instability types are determined considering the obtained data and characteristic of slopes.
___
- O. Gökçe, Ş. Özden ve A. Demir,
«Türkiye'de afetlerin mekansal ve
istatistiksel dağılımı afet bilgileri envanteri,»
Bayındırlık ve İskân Bakanlığı, Afet İşleri
Genel Müdürlüğü Bayındırlık ve İskan
Bakanlığı Afet İşleri Genel Müdürlüğü,
Ankara, 2008.
- İ. Ketin, «Tectonic units of Anatolia,» Bull.
Mineral Research and Exploration Institute
of Turkey, cilt 66, pp. 22-34, 1966.
- E. Timur ve A. Aksaray, «1:100000 Ölçekli
Türkiye Jeoloji Haritaları No:30 Zonguldak
F29 Paftası,» Maden Tetkik ve Arama Genel
Müdürlüğü, Jeoloji Etütleri Dairesi, Ankara,
2002.
- P. Phal, «Estimating the mean length of
discontinuity traces,» International Journal
of Rock Mechanics and Mining Sciences &
Geomechanics Abstracts , cilt 18, pp. 221-
228, 1981.
- J. Jenning, «A mathematical theory for the
calculation of the stability of open cast
mines,» %1 içinde Proc. Symp. On Planning
Open Pit Mines, Cape Town, Balkema,,
1970.
- D.R. Piteau, «Geological factors significant
to the stability of slopes cut in rock,» %1
içinde Proc. of The Symp. on Planning Open
Pit Mines, South African Institute of Mining
and Metallurgy, Johannesburg,, 1970
- P. Fookes ve B. Denness , «Observational
studies on fissure patterns in Cretaceous
sediments of southeast England,»
Geotechnique,, cilt 19, no. 4, pp. 453-77,
1969.
- P. Attewel ve I. Farmer , Principles of
engineering geology, Chapman and Hall:
London, 1976.
- S. Priest ve J. Hudson , «Estimation of
discontinuity spacing and trace lengthusing
scanline surveys,,» International Journal of
Rock Mechanics and Mining Sciences and
Geomechanics Abstracts,, cilt 18, no. 3, pp.
183-197, 1981 .
- ISRM, «Suggested methods for the
quantitative description of discontinuities in
rock masses,» International Rock Mechanics
and Mining Science, Geomech. Abstr. , cilt
15, pp. 319-368, 1978.
- ISRM, The complete isrm suggested
methods for rock characterization, testing
and monitoring: 1974-2006. Suggested
Methods prepared by the Commission on Testing Methods, ISRM, R. Ulusay and J.A.
Hudson (Ed.),, Ankara: Kozan Ofset,
Ankara, 628s., 2007.
- R. Ulusay ve H. Sönmez, Kaya kütlelerinin
mühendislik özellikleri, Ankara: TMMOB
Jeoloji Mühendisleri Odası Yayınları: 60,
2002.
- Rocscience, Dips v6.0 Graphical and
statistical analysis of orientation data,
Rocscience Inc.,, Toronto, Ontario, 2012.
- C. Gokceoglu , H. Sonmez ve M. Ercanoglu
, «Discontinuity controlled probabilistic
slope failure risk maps of the Altındağ
(settlement) region in Turkey,,» Engineering
Geology, cilt 55, pp. 277-296., 2000.
- W. Yoon , U. Jeong ve J. Kim, «Kinematic
analysis for sliding failure of multi-faced
rock slopes,» Engineering Geology , cilt 67,
no. 1-2 , pp. 51-61, 2002.
- B. Kentli ve T. Topal, «Assesment of rock
slope stability for a segment of the AnkaraPozanti motorway Turkey,» Engineering
Geology, cilt 74, no. 1-2, pp. 73-90, 2004.
- İ. Keskin ve I. Yılmaz, «Şebinkarahisar ve
çevresindeki kütle hareketleri ve kaya
şevlerinin duraylılığının kinematik
değerlendirilmesi,» Cumhuriyet Üniversitesi
Mühendislik Fakültesi Dergisi Seri AYerbilimleri , cilt 23, no. 1-2, pp. 25-42.,
2006.
- G. Özdemir , İ. Keskin ve I. Yılmaz, «Aluçra
(Giresun) yöresindeki kaya şevlerinin
duraylılığının kinematik analizi ve yapısal
yaklaşım.,» Cumhuriyet Üniversitesi
Mühendislik Fakültesi Dergisi, Seri AYerbilimleri, cilt 24, no. 1-2, pp. 1-18, 2007.
- Z. Gurocak , S. Alemdag ve M. Zaman,
«Rock slope stability and excavatability
assessment of rocks at the Kapikaya Dam
site, Eastern Turkey,» Engineering Geology,
cilt 96, no. 1-2, pp. 17-27., 2008.
- I. Yılmaz, M. Marschalko, M. Yıldırım ve E.
Dereli, «GIS-based kinematic slope
instability and slope mass rating (SMR)
maps: application to a railway route in Sivas
(Turkey),» Bull. Eng. Geol. Environ., cilt 71,
no. 2, pp. 351-357, 2012.
- S. Tudes, Ş. Ceryan ve F. Bulut,
«Geoenvironmental evaluation for planning:
an example from Gumushane City,» Bull.
Eng. Geol. Environ., cilt 71, no. 4, pp. 679-
690, 2012.
- S. Alemdag, A. Akgun, A. Kaya ve C.
Gokceoglu, «A large and rapid planar
failure: Causes, mechanism and
consequences (Mordut, Gumushane,
Turkey),» Arabian Journal of Geosciences,,
cilt 7, no. 3, pp. 205-1221, 2014.
- S. Alemdağ,, G. Zülfü ve C. Özkirişçi,
«Bağlarbaşı-Tekke (Gümüşhane)
Karayolundaki Kaya Şevlerinin Kinematik
ve Limit Denge Yöntemleri İle
Değerlendirilmesi,» Artvin Çoruh
Üniversitesi Doğal Afetler Uygulama ve
Araştırma Merkezi Doğal Afetler ve Çevre
Dergisi, cilt 1, no. 1-2, pp. 1-10, 2015.
- E. Hoek ve J. Bray, Rock slope engineering,
Third Edition, The Institution of Mining and
Metallurgy, London, 1981.
-
- D. Wyllie ve C. Mah, Rock slope
engineering civil and mining, Spon Press,
Taylor and Francis e-library., 2004.
- N. Barton, «Reviev of a newshear strength
criterion for rock joints,» Engineering
Geoglogy, cilt 7, pp. 287-332, 1973.